Subscribed!!

I think I need to know how to fix it but not the adjustment

good job Do you need programming after changing the fluid? How many liters of liquid did you put? Is the fluid calibrated in the operating position?

Pushing all the dirt inside throttle body

After you Jack your vehicle up on stands and flush it till its clean, ( which hardly anyone does) you need to add a bit of Sea Foam power steering formula to break up varnish and make it like new. Putting on a magnetic fluid filter in the line is also good to help remove metal built up from not realizing your pump will wear out if you don't....and that is very expensive. Be sure to use the correct reccomended fluid your vehicle is designed to use, as they are not all the same. Watch other you tube videos prior to doing this correctly. Don't do it wrong , or you will be in a world of hurt. Side note to notice: car must NEVER BE RUNNING to do it, refill completely prior to starting and be sure all hoses are reconnected before you do. Ps...I don't work for Seafoam. be sure to use only their power steering product only, it makes all the difference in the world.

What an excellent, concise video, which shows all the stages simply and efficiently. Well done.

Excellent information. Thanks for posting.

*This method for cleaning catalytic converters is unlike anything I've seen before! It seems to have done a great job.*

thanks

I love the part where he tells us the liquid.

I learned something of value here. Thanks for posting.

سلام عليكم. متابعك من امريكا. ماشاء الله تبارك الله رجل بارع

Not sure if the fuel filter can handle the temperature.

garden water has minerals,

Thanks!

Did the car start after that ?🤔

That was definitely over an 5 minutes job. But the videos isn't (will give you that one)😅

Thank you. Great video.

This will never work on high mileage hard carbon deposits. This can only be used as a Maintenace duty every oil change . Then it might show significance at 100 k miles.

Thank you Borat, my wipers no longer make annoying sound. My wife, very happy!

There is air coming out when bleeding tire which is not a good sign. It shoudl bleed only fluid not any air. In order to prevent this, don't flush all the fluid in master cylinder just left some at the bottom and start bleeding later. But in any case, there shouldn't any air coming out while bleeding.

يعني حمامك سعادة اجت دورة انا❤

Hi. Can you share a link to your toolbox?

Bro, you better hope it didn’t destroy the sensor

so what's the cleaning solution?

thanks for the Video sir

didnt clean a darn thing.

Berrymans chem tool works great

Hi guys, did you find that picture 1 without letters "2L" "A", but picture 2 has these letter, I think they are different piston.....

My friend had a intake valve carbon buildup in his v6 ranger , Ford couldn't find out why yhe engine was bucking, took it to an old mechanic who made him run his engine until it was hot , he then proceeded to pour ice cold water in the intake with the engine at high rpms, it literally destroyed the carbon build up and it ran like new afterwards

great work

Question have you made a video of how to change rear brake pads on 2022 Camry that have the electronic e brake yet? Gracias 🇲🇽

Maybe hitting a pothole? Rough roads?

you my friend just pushed those slags unto the manifold 🤦‍♂️ wioe cleaned 30% of the deposites but 70% are now at the manifold so, nah i don't advice that unless you're very lazy

How much better is using Carb cleaner than a concentrated PEA-based cleaner?

That was great job you have done well done and thanks for uploading this video

😢

Never Do This. You will ruin the heat element .

❤❤❤❤❤

How do you clean the catalytic converter?

I can’t tell if it works but I’m thinking it might be necessary to repeat the process, not unusual for dealing with engines😂🎉

looks not clean but melted and working bad

That's a 25€ sensor... Just change it hahahhahaahh

Man I’ll tell ya he makes it look easy. I did this on my 2013 Camry and it was far from easy. Please make sure u atleast have some experience working on cars before doing this. Taking it off isn’t hard. Putting it on is. I recommend using papertowel in the socket so the PCV doesn’t fall when u try to thread the new one in.

السلام عليكم اخويه انت من العراق وهل لديك مكان نكدر نسوي تنظيف انجكترات يمك

Fantastic video. Clear, concise, and detailed. Thank you!

you did pcv to the outlet side not the intake side.

Nice work on this video. Pretty awesome.

Brake hoses are wire braided with rubber around them, you just destroyed that brake hose

A questo punto si puo' fare cosi', prendere una parte di Meguiars diluirlo con acqua, spruzzare, diffonderlo, asciugare e lucidare, naturalmente con microfibra, il principio è lo stesso, si evita questa stupita applicazione.