I tried to do this but this ducking one screw won't come out I have tried turning both sides and still no hope 😢 guys help please

This is the only thing that worked for me, thank you!!

Just so everyone knows this fix is temporary. If you want permanent, buy a fine art brush and search a product called "Liquiwire" or "conductive paint" or "wire glue. I think they even make a pen version but that's probably too wide, hence the art brush. Don't forget a dab of this paint on the bottom of the rubber bit. Happy permanent pianoing!

😊😊😊😊

Its is a normal pencil?

Not work for me 😢😢😢

One of my keypad number button doesn't work, can i use this same method in it?

i am using novation mk3 and my 2nd and 3rd octave sharp keys that are connected to black colour one strap has been broken what to do any advice or any link to buy novation keys ocatave full set

And how to solve if they work ,but in différent fréquency velocity (inconsciency) and sometimes yes sometimes no!

thanks man 😎

Keyboard ka scrow wali pol tut gai hai to kaise thik kare

DUDE YOU ROCK - pencilled in all the contacts on my old boss dr 5 and now its barly a finger touch to change it unlike before when u you had to press so hard - thank you so much from NZ

i used this technic but few dead keys is now over react and also some keys is still not working so tell me fix it anotherway please 🙏🏻

Does the pencil and the drawing on the board have to look deep?

My keyboard (CASIO ctk 731) , display board ok, but keys r not working.This instrument is kept unused for last one year.... how to repair it,pl.suggest...

You just might have saved this guitar player a lot of heartache fixing this thrown away p 35b Yamaha

YOU ARE AMAZING!??!! 😱😱😱😍THANK you so muchhh for this amazing advice , I had problem with three keys ..those I solved just by simple cleaning, but one last key was still not working until I tried this 😱😱

Great 🌹🌹🌹🌹🌹🌹🌹 💚 💛 ❤ 💙 💜 Greetings From Super Extremes- Sri Lanka 💚 💛 ❤ 💙 💜

I think there is a special graphite glue pen you can buy for this...i forget what they are called. Great video.

Brilliant. Thanks a millions.

I fixed the same issue with my CTK 3000. Here is the quick fix, you need: 1. Interest in technology (to open the casio) 2. Simple Pensil Eraser. I rubbed the same surface area with rubber and the rubber sucked the entire black dust and now it is working just like before 💯

ese teclado ya no sonara, le destruyo las pistas de carbón

This is a workaround and does not work long-term.The contacts can also be completely damaged.The keyboard and rubbers must be cleaned with Isapropane alcohol.

Thank you sooo much! I had an old Casio 671 keyboard, not in use fo rmany years. The keys were working fine, but the buttons, that you need to use to select t he sounds or rhythms were not reacting, when pushing them. Also the on/off button did not work most of the time. After cleaning the "contacts" with alcohol and additionally applying some pencil on them it works now like it is a new keyboard!!! Can't thank you enough :) Now my kids can use my old keyboard to practise music <3 <3

Worked like magic … this tutorial is gold

I've seen a few videos like this, but it works better if you clean the contacts on the PCB board, and then apply graphite to the carbon contact in the the rubber strip

Pencils contain graphite it’s as simple as that

BRAWOOOO ! BRAVOOOO!!!

Fixed my Yamaha mm6 today , The 3rd. D key had poor contact , Took everything apart use the Pencil technique on the contract . Put it all back together !!!! Works beautifully ! Thanks !!!

This is not working it is the waste idea😠

Pay peanuts and you get monkeys (well ex-Soviet fighter pilots) I suppose! 🙄

As for me have tried that but it is not working so I notes that two line of carbon is broken so how do I fix broken carbon

I've done so many times for decades it's not permanent but sometime last for about a year. Worth some tries as it pose no harm..

Didn't quite work for me though

Some more tips. So on my keyboard, 3 keys went dead. Cleaning the landing pads and swapping the rubber membrane did not cure the problem. Looking at the circuit board, I noted that keys are wired in groups. Although the three keys were not next to each other, they were in fact part of a group. So I traced the fault to a break in the PCB track. I fixed this with a bit of soldering and the dead keys are now alive! However, all three now play louder than any others. This cannot be due to their membranes, as it is not common to all three keys. So I have more work to do!

Mi pace moltissimo..complimenti

I did this as well. The problem is its easy to short out the contacts with graphite "haze" on the non-contact portions. My fix was to go over it after with a Qi-tip and a lighted magnifier to find the shorts. Worked great! NOW my issue is that one Bb ALSO plays the # above it every time! GRRRRR

Sir mera yamaha ka keyboard band hua he light nahi aa Rahim he

wow, it worked, thanks

This works because graphite (a conductor) helps the key contact with the sensor (I hope I'm correct)

Thanks

3 keys too loud on technics kn6000...how do I fix this...

Cảm ơn bạn đã chia sẻ video nhe 👍❤️

I would recommend simply rubbing the contacts with a cotton swab moistened with distilled water to minimize residue (I used the water condensed under the lid of an electric kettle). This fixed 2 non-working keys, and I did the whole keyboard to prevent similar occurrences in the future.

Thank you so much!

Hi sir do you have contact info or fb page po? for some questions po sana.. thank you ao much po😊

Sir pwde po ba yan sa loud keys? Or sa dead keys lang po?

thank you!! tried it on nord electro 5hp and it worked!!

I have one questions? So when a key it doesnt sound i just have to clean it?

I couldnt see anything?