2:03 in...... The crazy steep angle on that turn fin is going to dig that sponson into the water; BIG TIME. I'll watch more of your vid and see if you catch it. Edit: No. you didn't. You want the "hook" on the turn fin parallel to the direction of travel. What you have is putting a lot of energy into digging the sponson in. Handling will be 100% better of you set it up right. Look at how Big B has his fin situated; that's how it's supposed to be.

Potential disaster avoided! I'd be sad if you lost that one.. it's like a pretty little guinea pig/fish😄

Seems to me that GPS acting up has been happening to a few of us. Not sure what is going on there. Have you tried using a product called corrosion X it’s in red can and you can spray it on your electronics and waterproof them

Ok ok imtrying thatthis week on one of my boats

That boat's looking better.. you're running that three-blade prop cavitating too much for me.. I wish you would try next a 35mm 1. 4 pitch two blade prop the 1.4 will pop that thing right out of the water be way quicker... I'm saving my money try to get a hull from you can you tell me what that would cost unpainted then I can build it from there.. retired on fixed income start out, and have to plan everything.. keep up the videos like watching.. always full triggerrrrrrr

Looking good! I can't wait to try my new turn fin. BG4L

Liked and sub'ed. Little pricey for my puny pockets, but I like that it's built in the USA. I'm pulling for you. Just a tip: you might want to clean up the language or maybe bleep it. I'm sure it would result in more sales.

Had a cop roll up on me while running my rc truck in a parking lot. Thought for sure he was gonna tell me to get lost. Instead, he tells me he's gonna park over yonder and could I run my truck straight at him? He wanted to see if he could get it on the gun. 42mph! Coolest cop ever.

The stock version runs very well. 1800mah pack gets you a fair amount of laps too. Lots of fun 🤟🍻

😂😂 don't feel bad I forgot to grease the shaft today going into my mod boat

Man!! Im so glad you love it!! Jerry and i were like damnmmm! Gunmetal flake coat was great!

Bro that new turn fin looks Wicked grabby on the water.. let's get that 'Ducer done too!!!

Nice work, the boat turn so much better holding the turn. Big difference and with some adjustments the boat will be dialed

Cool boats, my ponds are rough n require p limited 32”size n up… Easier to work on 40”Plus size like offshore 48” boats

I like Metal Flake! & all things Metal 🎵🤟🏻

Stunning, have fun building her up.

Beautiful boat ❤❤

My kind of fishing 😅

Too cold in VA! My pond is frozen. & its dark when i get off work.

Love the color scheme . Super smooth ovals . A friendly suggestion if you don’t mind . It would be good if the background music could be a little lower so I can hear the acceleration of the boat . Loved this video . If you are trying on different props it would be good to have a speed comparison . Also if this prop was big for the boat it did not put a demand on the current to cause the wires to heat up ? Thanks

Not too shabby, I will call that successful. No encounter with walls and came back on its own power. Good starting point and more tuning in indeed. The oversteering could be the sponson is hooking the water or COG balance point might be slightly often a little two nose heavy. Clean run by the way still. I am following to see what you can do with this boat

Ace of Base! What a throwback😄

Man she just wanted to rip so bad lol. Can’t wait to see this thing go!

Love that paint scheme! Looks like she’s running well, what prop did you say works good and gives a little speed boost to the stock system?

I heard you sell these little hydros

The boat looks great and with a little more tuning she will be dialed in.

Ran very sweet. 👍👍

2:59 I know your heart sunk for a second along with it. Glad she made it back ok & the paint job is looking good

Yea I had a cam hooked onto my tug and those things run so hot and the range was pretty poor. Ended up ditching it, I’m sure the high end ones work better but not wanting to speed that kind of money on it. Hopefully you get it running good!

thats a big setup. sure to go well. Very slick

That thing looks sick Bro😮

Onwards to the speed trials . 👏👏

Fuk yea bud! I'm proud of ypu my friend!! It looks great! SEND IT!!

Oooo stacking dimesss!!!!!❤

How many milliwatts is your transmitter? You may want to do the testing outside away from Fluorescent lights and wifi. If you're walking away from the receiver, the water in your body will absorb the signal.

Put the camera and transmitter a separate battery.

Thanks bud for the info! Great Job!!

Dang that thing turns on a dime! Lol at the spraying yourself with sewer water :)

thank you so much for making this vid. I had to splice in a old murc. controller to a newer murc.9.9 six pin and this worked grate I have 2 wires left the gray on the motor side and a white on the controller side I haven't put them together yet not sure if I should any idea what it might be for maybe running lights or alternator to battery.. thanks again

Great idea. Do you wash the soap off immediately or let the paint get tacky? How’s the paint not wash off?? Nice

Dang your logo looks sick on that dom! Bummer the solder joints came loose, happened to me a few times in the past. Seems to be running pretty good tho

What prop are you running?

Happy Thanksgiving brother!!

That's Jack in a crack box

This is what I’d call wicked 👏👏

Coby!!!!! Dude the pics you you sent me of the boat don't do it justice I can't wait to run that thing around

Nice work Coby. You should try painting on canvases too. Use qaulity acrylic paints. It’s so much fun.

Very sad state of affairs for the homeless. Sadly this is happening all around the world. I visited the US, SF and LA in the 90’s and witnessed a lot of homeless. At the time there was very little of the same in Melbourne where I lived at the time. Now, some decades later there is a marked in crease in homelessness in Melbourne and Adelaide. Presumably in all capital cities, satellite towns and suburbs too. State Governments are to blame as they have closed a lot of residential community housing for the disadvantaged. These people who need help with their health and all that goes with it are now on the streets. With regards to Melbourne at least from the mid 90’s awards, the state Premier Jeff Kennett from the Liberal Party, ( party who supports the wealthy, big wealthy business, and a reformist government at the time had a big input in the way homelessness evolved into the way it currently is in Melbourne. it’s even worse now in 2024. Cost of living is huge, there are very few rentals available,it’s not uncommon for 100 plus applicants to be lining up for an inspection for an apartment that is within budget of many. This is Australia wide. There is no housing in Australia, very little of it. Houses prices (mortgages) are beyond reach of so many. People have to rely on their inheritance or ‘ the bank of mum and dad ‘ to get themselves into a mortgage. This too is happening Australia wide. If you’re interested Google Australia’s housing crisis and it’s pathetic how the state and federal governments have failed the people and let this happen. Australia was once touted ‘ the lucky country’ and in some ways it still is.Homeless is plenty in Australia, in every state. Plenty of unusual scenes like the person in the box here too. They get aggressive, verbal you when you don’t give coin. I give when I feel like it and donate to charities where I know that the donation given will go to the people in need and not pocketed by the unscrupulous.

Wow so sad!! Be careful he might be hungry for brains!!

Is that for the flood chamber?