Jack Reynolds

Пікірлер

@stupidswag0 3 ай бұрын

So for clarification, in order to take my headliner off I have to take out the seats?

@NV..V 16 күн бұрын

And...rearrange the hall closet

@charles-ih7zp 6 ай бұрын

Nice I’m using 12 gauge wire so I just drilled a hole and put a grommet in it

@kereberus1 Жыл бұрын

I used Mega Zorbe Hydrophobic Melamine Foam on my 2019 ram 1500 classic. I thought I had to take the whole headliner out too but ended up just removing the 1. sun visors 2. the two front pillars 3. the two back clothes hangers. The headliner rests on the 2 middle pillars so no need to mess with those. You need to disconnect the back light by opening it and unclipping it. And thats it. we rested it on the seats and put the foam on which is really really really sticky. IF YOU TOUCH THE STICKY SIDE THE STICKY SIDE WILL STICK TO YOU AND YOU DESTROY THE PIECE YOU TOUCHED. so you have to be as careful as possible. You may also need to cut one wire in the back passenger side as mine ended up being too short and hanging up the headliner. No idea what it was for - thin green wire.

@SkippyS13 16 күн бұрын

Green wire would be ground for something. Thank you for your comment, here. I'm getting ready to do my 2016 1500 and knowing I don't have to do everything this guy does is a HUGE help. Sun visors, two front pilars, two back clothes hangers. MUCH easier. Will give it a go! Even if all I do is get 50% of the roof covered, it's got to be an improvement.

@josephhervieux7374 Жыл бұрын

Thanks for the video. How many hours total did it take to do the entire removal , Dynamat and re-installation?

@stevehenshall9775 Жыл бұрын

Is this seriously the only way to drop the headliner!? That’s insane. I have crazy leaks coming from what seems like everywhere and wanted to drop the headliner to try and determine where it’s coming from, but no way I’m taking out all the seats and everything. That’s crazy. Maybe I’ll just flex seal my entire damn truck lol.

@zack92243 6 ай бұрын

99.9% it's your third brake light seal just FYI

@stevehenshall9775 6 ай бұрын

@@zack92243 it was. Fixed it. But now my windshield is leaking….cant replace windshield because the body is rusting and they say it won’t hold anyway unless I fix the bodywork….im just going to flex seal it lol

@eastwood2414 Жыл бұрын

Thank you!!! For this video. Got some good ideas from it for my 5th gen. I have dynamat on doors and front floor, but will definitely put some behind the seat now. I like that idea. 👍🏿👍🏿

@mikeinpcola5543 Жыл бұрын

Hi Jack, that's a great video man! I was thinking today about how to better cool off my Ram truck. I can feel heat pouring in from the rooftop therefore I'm glad I saw your video. If you don't mind me asking, did you by chance do a temperature check on the roof interior before and after your install? I'm curious how much it helps. I've had ceramic tint put on my windows and while it helps, I still think the overwhelming majority of the heat is coming in through the roof. And what's your recommendation on most bang-for-your-buck as far as dynaliner and dynamat if someone wanted to help stop heat through the roof? Thanks.

@ryankissoon3332 2 жыл бұрын

What’s the rear seat mod?

@Zanezach Жыл бұрын

Heya Ryan. There are a few vids out there but essentially on the 4th Gens you can put extra washers as spacers on the floor bolts. It raises the back seat just a bit. It creates just the right amount of space at the hooks behind the seat. When you fold the rear seat up, it clears those hooks, allowing you to then drop the backrest. Super if you need to access that extra space. There is another way to do this -- cut the hooks themselves, but I do not recommend this. Hope that helps!

@AzraelIgnis 2 жыл бұрын

Bruh.. I'm sorry. xD. I've done this with my charger and now will be doing it with my New Ram 1500. Going for that perfect audio goodness.

@Frosty.Fruits 2 жыл бұрын

Amazing video! I need to lower my headliner a few inches to install 3 nmo mounts in the roof and don't wanna drill through the headliner. Thanks for posting!

@goinmobile5473 2 жыл бұрын

Thanks Jack great video. My question is in regard to the black bracket that supports the overhead console. I see you removed it. I need to replace mine. Do you think it would be possible to do that without removing the headliner?

@Zanezach Жыл бұрын

Howdy GM. It's been a few years since I posted the vid, and no longer have the truck. (Miss the hell out of it). But at the 7:46 mark in the video, if I recall there are some clips and the only way to get to em, is to drop this liner. Hope that helps you out.

@robinhildebrand 2 жыл бұрын

Good video. I've already done the floor, back wall, c-pillars, and lower b-pillars hand was wondering if I should do the roof too. Looking at what's up there I'd definitely say "yes". Although I used "B-quiet". It's half the price of dynamat but works pretty much the same. Peel and stick and comes in 1 ft by 50 foot rolls. Thanks.

@Sleepy731 2 жыл бұрын

Roof looks good!

@SaboSells 2 жыл бұрын

It would have been nice if you would have shown How you removed the parts instead of just showing us After shots of them removed.

@j.ramsey8863 2 жыл бұрын

How do I get it out of the vehicle?

@johnmiller7653 3 жыл бұрын

I'm trying to install a screw on hat rack on a 2020 Ram headliner. Where can I safely position the screws for maximum strength?

@Zanezach 3 жыл бұрын

That headliner is merely foam. I would worry about it tearing out. Where in the headliner were you considering the hatrack to be mounted?

@imranchishti5457 3 жыл бұрын

Thank you for this detailed and informative video.

@JOSE58LOPEZ 3 жыл бұрын

I have a crackling noise coming only from the passenger dash speaker Any tips?

@Zanezach 3 жыл бұрын

You may have a blown speaker. Take a panel popper tool (Harbor Freight sells these in a kit, if you don't have one). While you're in there, and removing the speaker, you can place some dynaliner (not dynamat though) and it will help with resonance. Good luck!

@JOSE58LOPEZ 3 жыл бұрын

@@Zanezach did you run dash speakers and door speakers together?

@Zanezach 3 жыл бұрын

@@JOSE58LOPEZ I did run dash speakers, but separate paths. It's been some time, but I recall one of the dash speakers taking a little longer than the other to fish the wire worm through.

@elijahtheviking 3 жыл бұрын

Nice video but you didn’t show any of the removal process.

@gilhernandez605 3 жыл бұрын

Question Can the headliner be taken out of the truck through the door - everything I've seen says that the front or back windshield needs to be taken out?????

@Zanezach 3 жыл бұрын

I read somewhere that it can be folded enough to do so, like a taco and that the crease created can be smoothed out once re-installed. Otherwise, windshield or back window. Unless you need to remove it, work around it, and reattach wires when done. Good Luck!

@gilhernandez605 3 жыл бұрын

@@Zanezach 1 more thing can you post the link to the dynaliner??? I can find dynamat but not the liner - thanks in advance

@Zanezach 3 жыл бұрын

@@gilhernandez605 check out Amazon and do a search on Dynamite Dynaliner. Good luck!

@mr.anderson910 3 жыл бұрын

The final result is awesome!!

@mr.anderson910 3 жыл бұрын

Those torx 50s are the lamest thing they did on the interior of them rams

@kriskorencsik8729 3 жыл бұрын

Could you repost your video on how to remove the rear wall behind the rear seats? I am not finding your video.

@Zanezach 3 жыл бұрын

Hi Kris, I don't think I have a detail video on that, but it is pretty easy. Underneath are 4 long bolts. I used a crescent wrench on those. The seatbelt base which bolts to the deck needs to be pulled too. Good luck to ya!

@ULOkiePerfomance 3 жыл бұрын

Where’s the rest

@Zanezach 3 жыл бұрын

Hi Joey, there are 3 videos in sequence. This is 1 of 3. Hope that helps! Good luck.

@silevafresh8522 4 жыл бұрын

video would be better if u actually showed us how to remove the fucking headliner, instead of talking so much im wondering if u ate ass before poorly recording this video

@marcosp.9605 4 жыл бұрын

Sweet, thanks man, I’m putting in fiber optic lights through my headliner, so I’m stoked. Thanks for the help!

@collinstacy5398 2 жыл бұрын

How’d it go and where’d you hide your box? I’m planning on doing the same this weekend

@woll8870 2 жыл бұрын

@@collinstacy5398 how’d it go? I’m doing mine aswell.

@collinstacy5398 2 жыл бұрын

@@woll8870 it went pretty good I ended up just running the fiber optics out through that little hole the seatbelt comes out of and but the box in my seat it doesn’t look bad

@rickm400ex 4 жыл бұрын

Would you be kind enough to fill me in on how much square footage of dynamat you need for that entire project. Not just the roof, I think I heard you mention that you had covered other areas. Possibly everything that could be covered? Ty I'm in the process of building my stereo. Waiting for some small stuff and seeing how much I'm going to spend on the dynamat.

@rickm400ex 4 жыл бұрын

Same truck just a 17 bighorn

@Zanezach 4 жыл бұрын

@@rickm400ex Hi Rick, if memory serves I purchased 5 boxes (yes 5!) of the Dyanmat mega packs. I have 1/2 of a box remaining ( since sold my truck). I believe I bought 4 dynapads, and 4 rolls of 1/4 inch dynaliner, 1 box of 1/2 dynaliner and 2 boxes of 1/8 dynaliner. I ended up with about a yard of 1/4 inch remaining. It has been a few years -- so that is a ballpark assessment but not far off! Good luck to you on your project! Hope the videos have helped you!

@Widowmaker2828 4 жыл бұрын

I have the same exact truck and am going to do the exact same job next weekend! Thanks for the video!

@Zanezach 4 жыл бұрын

Excellent. Good luck to ya! You're gonna freak out how much quieter your cab becomes!

@Widowmaker2828 4 жыл бұрын

@@ZanezachI can't wait! 😁👍

@2006Cummin920 4 жыл бұрын

How did you get the coat hangers off?

@NOcasio87 4 жыл бұрын

How much did you use of the liner and mat? I want to order but I want to be sure I get enough and not way too much.

@Zanezach 4 жыл бұрын

I think 3-4 boxes. But I don't recall specifically. If you end up with extra you can apply it on top of the previous layer too. It is very adhesive. Good Luck to ya!

@NOcasio87 4 жыл бұрын

Jack Reynolds thanks mate! It’s on the list to get done!

@cheeseymccheese7249 4 жыл бұрын

8:20 is your airbag

@paulpopp1999 5 жыл бұрын

I've been wanting to do the same to my 16 1500 how long did it take start to finish approx??. Well done.

@swaggervader6809 5 жыл бұрын

Awe buddy....that's a lot of work..there is absolutely zero power loss by using factory wire.we usually run amplified speaker cable to the inside of the door grommet. There will be no advantage to do other wise. The engineers only use 16g wire on the speaker leads, don't need much more in "higher-quality" speaker cables lol. They all do the same thing.....conduct electricity......

@austinaldridge150 4 жыл бұрын

Swagger Vader typically you don’t need to run 16 gauge wire for aftermarket door speakers UNLESS the speakers you’re using are going to be fed more then 75 RMS. Factory speaker wire is very thin and can’t handle more then that. There is very noticeable power-loss and a lot of resistance when you try to push more then 75 through the wire and makes your speakers not perform to their full potential. 🤷‍♂️ I would personally never use high-power demanding speakers exactly for this reason. I prefer clean installs that don’t add more headaches or work.

@gol10dr45 4 жыл бұрын

Good to know. I'm doing RF Punch 6x9s in my doors, running a P600x4 RF AMP.. i may just tap into the harness behind the factory screen...

@vegasmyhome 5 жыл бұрын

I also own a 2010 Ram 1500 and I'm having a problem with my map lights...they won't turn on when pressing them while the doors are closed. They will only turn on by opening a door. However, they will turn off when pressing them while a door is open. Additionally, my visor vanity lights are not working at all. My suspicion is bad wiring above the headliner because the schematic diagram shows they all share a ground. Anyone else have this problem and is there an easier way to troubleshoot/repair?

@treynoahz71 5 жыл бұрын

how much rms power you running? That looks like a lot of work.

@bobjoefree7435 7 ай бұрын

Dude I’m installing a 5 channel amp along with a line out converter, on a new ram truck and it sucks ass when you have to run new wire

@underradar9858 5 жыл бұрын

Got a question, when removing the upper b pillars, did you have to take lower pillars off first to get top off? And also once you get seatbelt bolt out along with 2 tab bolts, do you just pull the upper pillar out like it’s held in with speed clips or is there something else you have to maneuver out?

@Zanezach 5 жыл бұрын

Right, bottom B first then top, because it exposes a torx bolt. Once that bolt is removed, plastic clips keep it in place and you can gently pull down and away to remove the top B. Good luck!

@underradar9858 5 жыл бұрын

Ah so it’s just not the seatbelt torx there’s also one underneath the bottom pillar for the top one? And also I’d have to remove the door sills to get bottom out? Would I beable to just slightly pry the bottom pillar out enough to get upper one out instead of taking whole bottom pillar out? Would of been great to see a step by step but prob hard to film while doing it all and making it long :) I just can’t find any videos on b pillar removal.

@Zanezach 5 жыл бұрын

@@underradar9858 right, start from the sills up, all around!

@transmitterguy478 5 жыл бұрын

Excellent vid, thanks for showing more than other guys do. It always helps us when you do a big job like this to show all the other wiring like the cab lights part . I want to install a rear camera in my third brake light, now I know how and where to run the wires. Also, If your rear speakers were not there, could you have got the headliner out the door?

@Zanezach 5 жыл бұрын

Only if I folded it like a taco, I fear. The windshield is most likely method for extraction. The headliner is rather rigid and it would have resulted in a permanent crease or worse.

@louindorato6855 5 жыл бұрын

What is the purpose of the liner ?

@Zanezach 5 жыл бұрын

the purpose of the Dynaliner? additional thermal protection and sound dampening.

@edcourty1978 5 жыл бұрын

How did u get the plastic boot clips off the truck. Do they just snap on and off ?

@Zanezach 5 жыл бұрын

You can take a small screwdriver or plastic panel puller kit (various small plastic extractor tools from Harbor Freight, Amazon, etc.) and gently pry them off one and a time. But no, do not use brute force to pull these out, the ends may snap off and reseating the clip will be problematic. Good luck!

@leonmoparneal3892 5 жыл бұрын

Man I wanted to put some fiber optic lights on my headliner like the rolls Royce Star lights but that’s fo much to take the headliner out only way I would do this is if I install a sunroof which I doubt so I will try installing it on my 300 but the truck my daily I really wanted them lights

@hiseminencetheholymacdiarmada 6 жыл бұрын

I wish you would ld have shown how to disconnect the electrical under the front seats, I can figure those damped things out!!!

@Zanezach 6 жыл бұрын

just a couple of plugs there under front seat. It's a harness. There's a couple tabs to push in and you are all set.

@mc1harris 6 жыл бұрын

Excellent video. I was wondering what was on the inside roof, I wanted to install a factory DVD from another Dodge, didn’t want to pull the headliner unless I knew where the cross beams were. Don’t know how many videos I watched just to see something else. I like how you showed as much as you could including the rear light wiring. Good job brother, thanks for helping me out. I have the 2010 Crew SLT.

@matthewduncan5673 6 жыл бұрын

Where did u buy then handles from?

@Zanezach 6 жыл бұрын

I think mopargiantonline. can't find my email receipt.

@ronniem3592 6 жыл бұрын

This is what I've been searching for!---Thank-you ===Great video ===Straight to the point, no loud distracting music, very helpful

@danp1520 6 жыл бұрын

I used this to assist during my install and it worked sweet. For the driver side, instead of creating a notch, I just split the speaker wire into single wires enough to reach the speaker. I was able to feed it through in a similar manner to how you did the rear doors just using two of the different small openings.

@Zanezach 6 жыл бұрын

even better! Glad it worked out for ya.