Air may be free but the compressor is really expensive. Solvent and a $5 spray bottle from the Dollar Store (plug). Cheap, effective, arrives at your door in 24 hours.
@omargunason65637 күн бұрын
Great video ... can you by any chance tell me the letter size and letter type on the Vokey Vedge - Impossible/possible? Thank you ...
@monkeypawism17 күн бұрын
What does the bending do?
@Fighting-4-Par26 күн бұрын
Are you using acetone immediately on the shop rag to wipe off the excess?
@codyroberts2929Ай бұрын
Only 30 seconds im and already love this
@davidtomsettАй бұрын
Why do you poke the end of the grip? Surely all sorts of dirt and muck can get in, causing rattles?
@martinrindomsoerensen8834Ай бұрын
The think that you are missing is water with a little dishwashing soap. And a properly is going to use mineralspiret when a will regreap my clubs. I have no compressor, and have the sperit standing around. So thanks for the info
@eosme2 ай бұрын
Have you tried soap water?
@donaldvosburgh83372 ай бұрын
Does mineral spirits mess up the paint on a graphite shaft?
@Samson.Boedefeld2 ай бұрын
Hello, how do you remove the glue underneath the ferrule? 2:56
@user-wk3lr9sz7z2 ай бұрын
Try using charcoal lighter fluid. Been using it for years. Work great.
@BCHonea3 ай бұрын
I am satisfied in knowing my becu eye 2’s are and will always be the best irons made. I’ve had mine since highschool in the 90’s and I’ve used pxg, newer pings, titliest, you name it. Nothing compares to the feel and the range my copper eye 2’s have
@grosFr0mage3 ай бұрын
how stupid would it be to attempt to stamp on a Ping G425 3 Iron crossover after a ton of practice on junker clubs, if so where would you suggest stamping ? Also love the vids prob the only ones I have found that are in depth.
@plaza711212 ай бұрын
Ping is trash anyways you can go ahead and practice on that 3 iron
@DAYOUJRP3 ай бұрын
Great video full of info. Love you’re delivery and humor 👏🏼🙏🏼💪🏼
@TSOSGERBY3 ай бұрын
I noticed that you puncture the end of the grip after installing it. Why do you do it? Thank you.
@dougweeks92884 ай бұрын
I use spray paint on my motorcycle grips and it works fantastic
@andresbatis224 ай бұрын
What’s the stamp size of the “impossible possible” lettering?
@vanquishgolfworks4 ай бұрын
It should be 5/32”. The stamp set is actually linked in the description
@NewNine_GolfАй бұрын
@@vanquishgolfworks Are you sure?? In the video you said the larger stamp was 5/32” and then the “impossible possible” was smaller. I really like the font of the impossible lettering, those CH Hanson or Young bros? I have the 1/8” young bros, those stamps look smaller and different, 3/32 maybe? Can you confirm the font and size please?
@normtakemori70444 ай бұрын
What is the purpose of "poking" the end after the grip goes on?
@Simon-iq1yl3 ай бұрын
I suspect in case the folded over tape seals off the shaft, preventing condensation inside from drying out.
@willdeit60574 ай бұрын
Please reduce the Music Volume I have had to turn it down 25%
@barrygoodson49525 ай бұрын
Ping ISI's don't require ferrules. They work you did is nice as I do the same thing but the ferrules have to go, lol. Just not right on those Ping irons !
@vanquishgolfworks5 ай бұрын
I know. The client requested I try putting them on anyways though. They came out okay
@TheWiryWoodchuck5 ай бұрын
so did you not use double sided tape?
@Omnis25 ай бұрын
HF-100 is totally awesome and you only need a light mist from a pump sprayer. It's like cologne. Just do a few sprays on the taped shaft over your bathroom sink and the grips slide on super easy. I did all mine by hand, no stupid vice or fancy drip tray. If you're dripping solvent you've used way too much. The little bottle that came with my grips is probably enough to last me the next decade. It's only like a few bucks shipped--- all these other inferior solvents and your dish soap are way more expensive.
@Grantski20075 ай бұрын
Isopropyl 99% you think it’s similar to mineral spirits
@davidnagy5105 ай бұрын
Ever try soapy water just add a few drops of dawn dish soap to a spray bottle full of water
@colilew5 ай бұрын
Your content is great! Thank you for not putting it behind a paywall. Keep up the good work!
@txnsailor7 ай бұрын
Great review! Thanks for sharing!
@rmb87357 ай бұрын
What do you use for the paintfill?
@vanquishgolfworks7 ай бұрын
I use either testors model paint for glossy or just regular hobby lobby craft paint for matte
@RByrns-ee3yp7 ай бұрын
Do you just try to paint inside the stamp with a fine brush or put a ‘blob’ on let it dry and wipe off top layer? Do you have a video on paintfill?
@RByrns-ee3yp7 ай бұрын
Do you just try to paint inside the stamp with a fine brush or put a ‘blob’ on let it dry and wipe off top layer? Do you have a video on paintfill?
@scottbeisel75987 ай бұрын
If you do air can you remove them with air after a year of using?
@vanquishgolfworks7 ай бұрын
Yep you should be able to no problem.
@RamxRamx-fw3gm8 ай бұрын
You need that little air adapter thing you used though
@vanquishgolfworks8 ай бұрын
You do but that adapter piece is only like $8
@ettsn6 ай бұрын
Nah, the hole at the end of most grips will fit an air nozzle nib just fine. A cheap air gun for your compressor probably came in the accessories, but if not is just a few bucks.
@jonov11008 ай бұрын
Good video ruined by poor choice of music and loud as hell!
@sethpsoton8 ай бұрын
Where can you get engraving done? If it has not been done at the factory?
@vanquishgolfworks8 ай бұрын
Usually clubs are not engraved but rather stamped. I don't know of any place that will engrave a club but I'm sure you could find one. As far as stamping goes. Any club fitter or builder should be able to do it.
@sethpsoton8 ай бұрын
@@vanquishgolfworks thank you very much. I should have said stamping and not engraving. Do you do any custom stamping?
@vanquishgolfworks8 ай бұрын
@@sethpsoton I do, yes! Check out my site, vanquishgolfworks.com for a few examples
@TKPak18 ай бұрын
Is white spirit a mineral spirit?
@hicksinguefield83098 ай бұрын
'Promosm' 🌹
@ettsn9 ай бұрын
Good info, well presented. Thanks man!
@davidgent1889 ай бұрын
Brilliant vid…. Thank you! 👍
@sportscardrippingteacher9 ай бұрын
Great irons brought back to life! Thanks for sharing!
@vanquishgolfworks9 ай бұрын
Thanks! I appreciate the shout out!
@casual_golf10 ай бұрын
What is the growth in your left hand
@vanquishgolfworks10 ай бұрын
Not sure. Something benign. Doctors think it's just extra veins. I've had it forever
@casual_golf10 ай бұрын
@@vanquishgolfworks interesting!
@edw520811 ай бұрын
I use air with water for some lub it’s easy on and dries quickly
@Silverryder Жыл бұрын
Seemed to be making it hard work and a mess better videos out there and easier processes
@sethpsoton8 ай бұрын
I have watched a ton of other videos and came to this one because most of them either don’t explain it thoroughly or they don’t work. I think this video is great!
@savilibartley8005 Жыл бұрын
Thank you for sharing and I've been using the air and water and it works too.
@boskosdoghouse Жыл бұрын
Thanks for the video, I just regripped a driver and almost didn't get it on Tip.......don't wear rubber gloves they just slip on the grip as you push....paper towel like you used works out well..
@toddwmac Жыл бұрын
Thanks. Am I correct in that you are using just standard painters masking tape?
@vanquishgolfworks Жыл бұрын
The tape that I used to "build up" and thicken the grip is 2" wide single sided masking tape. The other tape is special golf grip 2" double sided sticky tape.
@nlopi95463 ай бұрын
Did you use double stick tape for the air or just masking tape?
@michaeltutt2791 Жыл бұрын
Water will work, but needs water tape.
@rogerredford6242 Жыл бұрын
Good video, but, please turn down the music. I use charcoal starter which is basically mineral spirits and cheaper.
@larrywithrow5876 Жыл бұрын
Great gripping tips, but loose the annoying music…please!!
@vanquishgolfworks Жыл бұрын
hank you! What would you recommend instead?
@larrywithrow5876 Жыл бұрын
@@vanquishgolfworks even just lowering the volume. Then we could hear what you’re saying better and enjoy your awesome videos better. Thanks
@vanquishgolfworks Жыл бұрын
@@larrywithrow5876 I've been working on that with my most recent videos. They should be better. Professional editors are also like $150-$75 / hr. So I've been editing it myself and learning along the way
@larrywithrow5876 Жыл бұрын
@@vanquishgolfworks totally understandable. It takes a while to figure things out sometimes, and you’re doing a great job!,👍 I always appreciate “constructive “ feedback, especially when you’re trying your best to figure things out on your own. Please keep those videos coming😎👊
@vanquishgolfworks Жыл бұрын
@Larry Withrow what would you like to see a video about next?
@arifibrahim1640 Жыл бұрын
As a beginner, I tried to ask for a fit, what i got as a reply was for me to learn and improve my swing first 😂
@vanquishgolfworks Жыл бұрын
Sure. I could see a coach say something to that degree. If you're just starting out there isn't a whole lot of information for a fitter to base their decisions on. However, certain things like how big the grip should be what shaft weight you should have, how long the club should be, etc are all still easily done. You can fit beginners, like yourself easily and starting out with something that fits can really help make learning easier.
@mpc77769 Жыл бұрын
Good presentation 👍
@vanquishgolfworks Жыл бұрын
Thanks so much! I appreciate the comment.
@chadbrochill558 Жыл бұрын
How many rounds does it take before the paint starts coming off after a fresh coat?
@vanquishgolfworks Жыл бұрын
Because of where the paint is on most every club (the back) the paint essentially never comes off. The paint I recommended is safe for soap and water so unless you get something abrasive in there, it really doesn't wear off.
@j.w.matney8390 Жыл бұрын
I use Ronson lighter fluid. Works great and it's cheap. Goes on easy, dries fast.