improper use. the largest rear sprocket should not be used with the largest front sprocket. so the chain crosses a lot, and the ratio between the largest gears is in a different combination too (this rule applies for the smallest rear sprocket and the smallest front sprocket too)

Completamente daccordo. Auto intelligenti per gente intelligente. Chi vuole intendere intenda, gli altri a piedi.😂

Danke!

Thank you! Very helpful video for me :)

I have a medium 6800 cage, do you think i could go 36 tooth at the back?

anyone know if there is a spreadsheet already available with all the data and figures entered, to save having to copy them down from the video manually ?

Die Untertitel sind eine Diskriminierung von Gehörlosen!!

What if you’re using a 1x10 set up. I have a 53t chainring with 10 sp cassette 12-25t. Based on your video it gave me 66 total range

Kurze Video,gut erklärt. Danke. 👍🏻👍🏻👍🏻

Thanks for your work. good stuff! I run a mid cage Ultegra set up with 11-34 rear and 52/36 front. If I didn't ride mostly in the hilly Hocking Hills of Ohio, I'd go with 11-30 and a short cage. I've used an 11-28 with a 53-39 in the front with a Dura Ace short cage. It worked well. It just didn't have a tall enough gear for my area.

Great video! There are a few differences on the North American market nv200's. The filler panel between the bumper cover and headlight is part of the bumper cover and the headlight bulbs are different. Otherwise, they look very similar. Our washer fluid bottle is mounted down low behind the bumper cover too.

I have those same rims! 👍👍. Excellent video.

how do you do it, 6000 km on the rear tyre is twice as much as I get!

Good idea to rotate tires around. I should have done that since my back is more worn and finished after 4000km. front still has a bit of life left but I'll replace it

super kruzes Video alles wuöichtig erklärt vielen dank 😎🤩👍🏽

Great job! Thank you for your attention to detail and the slow and articulate explanations.

Max i am looking at a caad12 2019 (rim brakes) in mint condition ultegra for $900. Size is 52cm, I currently ride a supersix 56cm (feels too big so I'm sure I'm really 54cm). Height 5' 10", inseam 32". Think I could get away with a 52cm? Thank you!

Inspired by this and similar vids, I changed the 11-28 for a 11-34 on my Felt CX bike. Kept the short/med cage 105 but used the Road Link and also subbed a 34 tooth chainwheel for the 36. Didn't even need to adjust the chain length. Now I have the 1:1 lowest ratio. The rest is up to me.

Danke! Sehr hilfreich.

Really helpful, thanks very much indeed ❤

Loctite the bearings in will last longer before creaking

George Noriega of Coast to Coast AM recommends visiting Coral Castle 🏰 - Very interesting to see, apparently.

A bit of history and some Kool music to boot from none other than Billy Idol?! 😮 What a trip..... 😅

Wrong I'm afraid. The creaking is caused by the BB axle fretting microscopically inside the bearing inner races. Look closely at the area of the axle that's inside the bearings and you'll see signs of wear, as well a blackening of any grease that's present. I believe this is actually called blueing. The answer is to clean everything up and refit the crankset with a smear of bearing fit compound on the area of the axle that's fretting. Problem solved.

Rim 19 mm tyres 32C and I got 29 mm... Why do you use so high pressure? On the tyre sidewall is signed 5,5 bar max... I use tube typ only.

Very good information. I currently need the extra gear of 34t on rear as I am climbing steeper grade mountains. I'm however using a R8000 ultegra front derailleur and rear derailleur in mechanical setup. My front is a compact chain ring set. It's been since 2018 since I used the 34t rear cassette, so I needed a refresher of what is allowed so I came here to this video. Thank you for this.

Bestes Familienauto aller Zeiten!

i can confirm that 8050 di2 ss derailleur with 11-32 cassette and 50/34 chainrings does not work.

Schrecklich, so ist das wenn man nicht kochen kann und sich in einem Video blamiert.

Outstanding. Thank you.

der Fahrkomfort ist klasse, besser als bei VW

Hi Max - could you please post the approx length (cm/mm) from centre to centre of both pulley cogs? Im trying to figure out if I have SS or GS. Mine measures 6cm/60mm

my bike is cannondale synapse UT，the same sound，the same shit bb30😂😂thanks share this video😂

Oh Gott! Du gießt das Beste weg!!! Die Fischsuppe. 😯 Nächstes Mal unbedingt auffangen!!!!

On an aluminium or steel frame a simple trick is to put a tiny bit of thick oil in the seat tube.

My capacity is 37. I want to use a Shimano GS Medium but the spec says my 16t front difference is to much? "Maximum Chainring Size Difference: 10T (medium GS version), 22T (long SGS version)"

Is bb30 creaking ? I want buy CAAD 12 but I hesitate because of possible creaking...

Kochst du noch immer

Range ≠ Capacity, at least logically, unless capacity is a reference to range - and not actual number of teeth. As, only roughly HALF of the chain is wrapped on cog and sprocket!

Lol u need a bigger bike pros don’t even ride like that

best review. Ofc a german haha

This video is amazing! Excellent explanation and practical demo.

Grease is not the solution. Bearing locktite to the frame, and ...please don't hammer the bearings !!

Langatmig und besonders nicht informativ wird das schnibbeln des Gemüses erklärt.

Thank you Max. I have been searching for this exact information for awhile and this video is perfect. I have the Ultegra R8000 system and the data you have provided will be important in my decision to switch the chainrings.

Very helpful video- thank you!

I think that square measure is too short for your legs, the height of the seat post is too long, it is unusual to see such magnitude on a bicycle 🤔

Read where u can and can’t apply grease. In most cases if u remove the bearings - replace them.

chain tension

Great milage you did there, but Im surprised after the cut with the glass you bother and repaired the tire. I don't know if this is only me but I would just trow it to the bin and buy new one. Is like 50euro, I think once per year you can spend 50euro on the tire, is not much. Regards