SeaKing Boats Nth Qld

Пікірлер

@simonmackey9050 16 минут бұрын

Good video ~ are you able to provide the specs please

@axscdvfb Күн бұрын

The decking looks great. Which brand did you use? I wonder if it will stand up to the sun in the long run. Some people report that it will deteriorate in a few years.

@porschedk 2 күн бұрын

Where is the link to Alibaba to get this boat???

@porteand 5 күн бұрын

This layout is so bad ass! Would be awesome to have in western Canada

@axscdvfb Күн бұрын

Then it will get 100% tariff just like Chinese EVs😂

@MichaelandMaryH 5 күн бұрын

Can’t wait to see how the v10 merc goes. It should fly

@seakingnthqld 5 күн бұрын

Yes - the next 4 week wait for parts is going to feel like a lifetime. Hopefully end of Sept we will have her swimming - Guy

@1Longranger 8 күн бұрын

Looks great, Guy!

@seakingnthqld 8 күн бұрын

Thanks bud. She's been my project for the last 18months and I am sooo looking forward to getting her on the water

@nicholaswirth1011 8 күн бұрын

Hey mate, you doing a great job on these, what’s the biggest your doing that can be towed with a std 3500 towing limit?

@seakingnthqld 8 күн бұрын

This one mate. Or the 790 which has the smaller beam but the 750 is def my favourite

@nicholaswirth1011 7 күн бұрын

@@seakingnthqld awesome it looks good. Seems to be the best fitted out boat in its price range.

@jamiej1861 11 күн бұрын

If you want to retrieve your drone, catch it out of the air and turn it upside down, the motors will immediately stop

@tsdean1980 14 күн бұрын

You run the exact same model prop? Or just the same pitch/diameter ?

@seakingnthqld 14 күн бұрын

Same pitch/diameter of Yamaha & Mercury standard props

@nicholaswirth1011 14 күн бұрын

That’s one hell of a tinny!!!

@MattOnTheDaily 14 күн бұрын

At Townsville

@martiniquewatertaxi8988 15 күн бұрын

Hi, Nice video.. Witch factory is the best ?

@Totallyabigfanoftotaldrama 16 күн бұрын

I work in China near the factory and visited on Saturday i was so impressed. Defiantly going to purchase a 10m cat. Watched both your videos and understand the costs as my partner and I do a lot of shipping and costs are runaway.

@pete3103 17 күн бұрын

Still for sale?

@seakingnthqld 17 күн бұрын

All current stock is sold but we have a 720 nearing completion thats still available

@pete3103 17 күн бұрын

@@seakingnthqld price and inclusions?

@seakingnthqld 17 күн бұрын

@@pete3103 fb.watch/tU8GQzAWvV/

@seakingnthqld 17 күн бұрын

Facebook ad link above.

@pete3103 17 күн бұрын

@@seakingnthqld not working mate 🤷‍♂️

@nicholaswirth1011 18 күн бұрын

this thing is absolutely wicked. A lot of boat for the money.

@smurfy1543 19 күн бұрын

Doing the due diligence and visiting the factory, having a dedicated onsite representative, etc. is the way to go to find quality. Generally, however, Chinese companies, American companies, and any other, for the most part, would likely not turn down a quick buck at the cost of cutting corners. A one-off buyer also has a higher probability of having this happen when buying made-to-order custom products. It should also be noted that the Chinese do not have the same work ethic and pride in craftsmanship as say the Japanese. They will lean on the side of something like, "Woops, it's ok, the customer won't see this weld anyway" (until it becomes a problem) vs. losing time/money and doing a job correctly. If it can be helped, even my Chinese wife won't buy Chinese-made for anything of considerable price or value. I know my opinion is more on the negative end of the spectrum, but I do acknowledge that things change over time. That being said, stereotypes, reputations, etc. do not originate from nothing. The good factories definitely have to make themselves stand out in an int'l market.

@MichaelandMaryH 23 күн бұрын

You do know the yammy has a rpm control function that allows you to change the rpm 50 at a time? Interesting to compare my NIZPRO tuned yammy. In the mid range 4600rpm I’m killing that yammy for l/hr getting 46l/hr but less speed. once you hit 5000 mine is worse and then I can only manage 5700rpm and burning 88l/hr Im getting less speed because it’s a big glass boat with horrible antifoul. Thanks for that. I have been chasing a comparison for my motor and you nailed it for me.

@MichaelandMaryH 23 күн бұрын

And the Nizpro tune actually makes them quieter. But not by much.

@seakingnthqld 21 күн бұрын

Yeah we want to trial a 17P prop on it before we hand over to new owner. I think we can get better speed and economy and still stay in the allowable max rpm range

@MichaelandMaryH 19 күн бұрын

@@seakingnthqld are you using Yamaha saltwater series or something else?

@johnboy5167 7 күн бұрын

I have a 7 metre plate aluminium half cabin fishing boat that is powered by a Yamaha 250 sho which has a Yamaha Saltwater series 2 19 pitch prop top speed is 95 kph at 6100 using .09 litres per kilometre it will cruise at 60 kph at 1.7 kpl@@MichaelandMaryH

@warrenhunts 24 күн бұрын

I always hate it when boat companies show you videos of their hulls slicing through a glass-calm lake while telling you how nice they ride... this is a good video showing real conditions.

@jb243wp 27 күн бұрын

Sheees, maybe a pair of ear plugs for yourself and you crew if ya got the yammy. 😂😅😂 The merc could go up one pitch in prop size being a larger displacement, then it defiantly would out preform the yammy at 6000rpms hand down both in speed and fuel consumption. But how long the merc will last is anyone's guess. Great review, nice work 👍

@johnboy5167 9 күн бұрын

My 250 sho is not noisy and has better fuel economy and performance than the 300 mercury 😂

@Drippyballs54 3 сағат бұрын

@@johnboy5167not performance kiddo

@jb243wp 27 күн бұрын

Yes the new Merc V range, go boldly. Yes, without a doubt, it will get you there quicker, potentially at better fuel consumption, probably a better look unit, imo. However the yammy will get you to your destination and back again more often without a doubt. Yammy overall servicing would be cheaper too, guarantee the merc will need something replacing that's not covered by warranty. Differently regarding the old L4 & L6 verado's, they were next level in that point of time, reliability at its best if properly maintained and not thrashed. Given time the new merc V range will be good when they iron out a few of the gremlins.

@1Longranger 26 күн бұрын

That may be the case but the holeshot won't be as quick. Witnessing the Yamaha perform on that boat was amazing. It may be noisier but there's no denying the grunt it has. There may be even more untapped performance on that Yamaha going up a hole on the transom and having a bit more of a cup on the prop but keeping the same pitch. It's pretty impressive as it currently is though.

@jb243wp 25 күн бұрын

@1Longranger yeah agree, the yammy can be tuned up a bit with the Nizpro option. Some big gains are achievable.. However, upping the prop on the merc one pitch size will compromise hole shot a little, no doubt, but for us the average recreational fisho, excessive performance in hole shot is over rated, unless the need to cross barways or having a comp bass boat.. not many rec fisho's I know put the hammer down flat out from a standing start, just because they can. Excessive fuel burn, and especially additional wear and tear on these newer 4 stroke engines can be costly in the long run.

@1Longranger 25 күн бұрын

@@jb243wp If the Merc was only just pulling 6k rpm then maybe going up in pitch won't help much. Don't the 300hp Pro XS engines like to rev? I thought they loved spinning to 6200rpm? If they make supposedly 10-15% above nameplate rating then what's going on there?? It should have blitzed the top end speed especially being 60kg's lighter as well as being larger in cubic capacity. It's a great engine no doubt and I deliberated long and hard over buying one. I don't think you could go wrong either way. I won't be doing the Nispro tune on the Yammie for warranty reasons.

@johnboy5167 11 күн бұрын

What a joke it's not even close to 60 kg lighter 😂

@1Longranger 10 күн бұрын

@@johnboy5167 maybe half that.🤔

@kizzjd9578 27 күн бұрын

Do you think some sound deadening material on the inside of the boat frame and canopy would help the noise issue from the boat vibrating?

@seakingnthqld 27 күн бұрын

I think so. A customer we are building a 720m for is going to trial some form of covering around the inside - he is researching it as we speak as he is a Yamaha man. I think it will make a real difference.

@vickz2985 27 күн бұрын

haha bro changed the thumbnail

@ryanatkinson6839 27 күн бұрын

That looks amazing ❤

@1Longranger 27 күн бұрын

Great review Guy! Told ya that the Yamaha would beat the Mercury in the low and mid range! And it looks like top end speed as well. Sadly, it beats the Mercury in noise level, too. Still, I think I can help that situation out as previously discussed. So many variables in these comparisons like gear case ratios, prop design etc. It'll be interesting out in the open water.

@seakingnthqld 27 күн бұрын

Yeah mate - we do that test this weekend. I have 3 x 720m coming to Townsville. 2 with Merc and 1 yamaha. So we will repeat the process. Its blowing 25knots too at the moment but we will find some half decent water around the island. We have a hole shot race lined up so will be interesting. Stay tuned for version II soon

@ptong226 28 күн бұрын

Very nice looking boat 🚤 ❤

@OtherServices-ft4ks Ай бұрын

300hp on that tiny thing 🫨

@nicholaswirth1011 Ай бұрын

Really like the rear deck alongside the motors. Done a great job including the extra touches on these. Wouldn’t take long to add some tweaks yourself for a fantastic vessel. Nice work mate.

@joelragsdale1360 Ай бұрын

We need these in the US! This is my dream boat.

@joelragsdale1360 22 күн бұрын

@@troll_face_edits do they sell in the US?

@lyfsalgorhythm Ай бұрын

are there any companies or is their anyway to get a boat like this to the USA.

@seakingnthqld Ай бұрын

We can assist on a consultancy basis - so you get our hulls with all the modifications and improvements along with our assistance with shipping etc. You can message us through our facebook page or website if your interested. There is a video on You tube "Hidden costs of importing" which explains the process a little better - Regards Guy

@dmx808 Ай бұрын

Are your boats from China ?

@joelwilson8419 Ай бұрын

When you're reading out your economy you're saying to the camera, 'thats 50 klm per hour, and we're using .6'.....but your text on the screen reads economy of 0.6km per litre..... Ya know that your actually 'using" 1.66 litres per kilometer hey? Not .6 as you're announcing....

@seakingnthqld Ай бұрын

Best economy rate was 0.8klm per litre. Worst was 0.5klms per litre as per the Digital readout direct from the engines.

@WillieDaaKidd Ай бұрын

Do you have a website or a link or we can look up to purchase one of these? What’s the price range?

@seakingnthqld Ай бұрын

This actual vessel will go to market for $279k no trailer. Builds can range from $250-330k pending whats in it and pushing it. Website is seakingqld.com also find us on Facebook"Seaking Boats Nth Qld"

@martinhansby453 Ай бұрын

Please show the overall build quality ...welds, finish , window etc .

@jb243wp Ай бұрын

2.8t dry weight on a vessel that length and width.. What's the plate thickness, hull, sides and deck?? 🤔 Seems a bit light on.

@seakingnthqld Ай бұрын

Its 3.2t dry. 6mm bottom 5mm sides

@jb243wp Ай бұрын

Thanks for your reply.. 2.8t standard build from factory. 3.2 Special build requests, being this particular vessel, yeah. Definitely would be worth it having the extra weight.