Please refer to @5:12

​@@cjmedia_llcbro how do I do that in nautilus

@@00c754 Not sure. I did google the answer though: 1. Select a Program. 2. Go to the PROGRAM > Home - Tone Adjust page. On this page you can check the parameter assignments and values, and adjust the sound. 3. Press the Sliders 9-17 buttons to look at the assignments for sliders 13, 14 and 16. Slider 16 is assigned to Amp EG Release. That’s probably the one you’ll want to adjust.

@@Piano-nx3eg Hey. Unfortunately, these sounds were specifically designed for the Kronos, and have not been evaluated on the Nautilis.

@@TensionX-ZPS Thank you for watching! 🙏🏾

MAAAAANNN...thank you...to think it took so long for someone to pick up on this. 😄👍

Hello. This light has (2) nonreplaceable bulbs. Here are some troubleshooting steps from the manual: Possible causes for light not turning on. - The light switch is turned off. - The fuse is blown or the circuit breaker is turned off. - Daylight turn-off (photocell) is in effect. - The circuit wiring is incorrect, ifthis is a new installation. Solutions: - Turn the light switch on. - Replace the fuse or turn the circuit breaker on. - Recheck after dark. - Verify the wiring is correct. If none of those steps work, then, maybe you do need to replace the fixture all together.

Much appreciated!

@@cjmedia_llc You already know, good brother.

Yikes!!!!! You’re right. It seems they went out of business. Their IG page has been taken down, and website seems to redirect to a Gelato website. That’s unfortunate. The owner was really nice. I will say that the most difficult part was the time difference. I’d literally have to schedule emails and/or be up extra early in the morning to get responses to my questions. Otherwise, great craftsmanship. I also had to pay for customs to let my bass through. The ergonomics and light-weight design are awesome. That said, I’d recommend that most guitarists/bassist build with makers as close as possible to their home base. Less shipping costs, easier/faster communication.

🤣...Make gains by any means necessary. 💪🏾

@@cjmedia_llc Amen to that! 👊🏾

@Babies World I'm am unsure, as testing had not been completed on that board.

Thanks, man! Yeah... You technically could add more weight. The most important thing is making sure the added weight within each box is the same. For this reason, it might make sense to purchase smaller weight increments, like some 1 pound weights.

There is a velocity curve setting per Timbre. In other words, for each velocity layer, you can adjust the velocity range that velocity layer triggers at. I can't remember the name of the menu, but it can be accessed in any Program's individual settings. For example, if your sample has 7 velocity layers, you can set: 1. velocity layer 6 will trigger when I press any key with a velocity of 70-95. 2. velocity layer 7 will trigger when I press any key with a velocity of 96-127. When it comes to software that can do this work for you beforehand, try Chicken Systems Translator Pro (Mac and PC): samplerzone.com/collections/translator/products/chicken-systems-inc

@@cjmedia_llc is there any chance to make a little video of this? 😩😩

Unfortunately, I haven't owned the Kronos for several years.

@@cjmedia_llc oh, any way to contact you? Maybe I could send you just some screenshots/pictures of the sampling tab and you could help me with it?

Hey. At 5:05, I explain that you'll need to adjust the release which would fix that sustain problem. If you don't follow all the instructions in order, you might not like the results.

I have not tested this with the original Kronos, and can't guarantee success. I would make sure you have the latest firmware specifically for your model installed. Then, if you want to try it, cool.

Stay tuned. I don't have the originals, but I may make these and more sounds available for Nord keyboards.

Nice! No prob! My favorite feature is having wheels.

Hey. These were created in a format that the Korg Kronos understands, and haven't been tested with any other Korg product. These sounds won't work with other manufacturers.

@@cjmedia_llc would you by chance have any more samples for more boards or virtual setups?

@@wfwilliams18 I don't at the moment, but, I may release some more free sounds in the future. If I do this, it would be for Nords.

No prob! God bless👍🏾

Thank you! This particular loop was created on the MPC One machine. However, the sounds that make the drum loop consist of percussion instruments (ie. Shaker, tambourine, etc.). These are all sounds you can find most recording software (i.e Logic Pro, GarageBand, etc.). How I further made the loop sound good is by taking all elements of the audio, mixing them, and adding effects using Logic Pro. I took the result, and merged it back with the video using Adobe Premier Pro.

@@cjmedia_llc Appreciate that. Would you be able to do a tutorial on this as I’m sure people can benefit from this

@@kieranmurdock4899 that's a great idea!

@@cjmedia_llc I am an MPC owner and would definitely interesting in this type of idea of making beats / click tracks like the one you made for this video!

I uploaded the items with the costs here as seperate screenshots... I believe the total cost was aroind $180. The benefit of building your own stand is that it's heavy duty and can roll. The official Powerblock stand for 90 LB Powerblocks is $140 now on Amazon. However, it doesn't have wheels: POWERBLOCK Large Column Stand, Silver/Black, Model:Large Column Stand Silver www.amazon.com/dp/B000XEAUBM/ref=cm_sw_r_apan_glt_fabc_VV6RTTK5B7M4AHTD0MGP drive.google.com/drive/u/0/mobile/folders/1OZz0DrElR1uyvcJUV3YJX8rXjdnCSvH1

I would definitely purchase wheels that can handled the total amount of Powerblock weight... Take into account the height of the wheels + the idea height for picking up the Powerblocks from the stand.

@@cjmedia_llc yea that's the only thing that is holding me back cause I already know it will be unconformable to rack up the power blocks..maybe I can cut the power block column a fee inches once I add a platform with whells?

@@cjmedia_llc I already have the large power block column. I wonder if I can add a platform with wheels to it. However I will probably need to cut column since wheels will add a few inches of hight

@@futbol1972 Yeah. You'd definitely want to go look at 4 wheels, see how much each is rated to handle, and the sum of each wheel's rating should be over the total weight of the stand and weights that go on them. Example: let's say the stand is 50 LB, and your Powerblocks are 180 LB together. Each wheel you purchase is rated for 100 LB. This means that all wheels together can handle 400 LB. This is perfect because the stand and weights weigh 230 LB. If you build a rolling cart, please be sure to brace it extremely well. The last thing you want is to try to roll the stand, the cart breaks, and comes down on your feet.

It's pretty cool. It's not as solid as a regular Hammond organ bench. If you move from side to side, it will shake from side to side, as it could stand to be braced a bit better.

@@cjmedia_llc thanks. I'll get a Hammond bench

No prob! Enjoy!

Dear Cedric how did you manage to get this sound so good? Also do you have more sounds they you made! Is there any chance that I can contact you?

@@timursakka1941 Thanks for the response. The main key to the sound quality you hear is using the EQ options, which I explain in the video. Be sure to follow ALL the instructions in this video from start to finish to get all the sounds sounding like what's in the video.

@@timursakka1941 Also, I don't own the Kronos 2 anymore. I don't have any additional sounds, unfortunately.

are these sound only on piano? or they some pads also?

@@anthonycalubag2428 Hey. I only sampled pianos for the Kronos. I don't have any pad sounds sampled for the Kronos.

Thank you! God bless you! 💪

Sorry that happened. Yes, the LCD did fail on me. If the owner is still responsive, you can reach him here: www.jg3tech.com/contact , and you can probably order a replacement LCD. Did you buy it from Amazon, eBay, or directly from the website? If you are still within Amazon, or eBay's return window, you can bypass paying for a replacement screen, and get a whole new pedalboard (may take some time to receive). *Another thought*: It might be a good idea to plug your pedalboard into a Furman power conditioner. When I had this pedalboard, I noticed the electronics would freeze up whenever major appliances in my house would turn on/off. Feeding your equipment (definitely your pedalboard) through a power conditioner will help with this issue.

@@cjmedia_llc thanks Cedric🙏🏾🙏🏾I contacted the seller and he sent me replacement parts and I just fixed the pedal in addition to replacing the stock springs with rubber bands... My old problem now is that this pedal only midis through my digital piano but not sounds from my laptop or I pad ...how do you your bass sounds to work so well?

@@tkat191 The bass sound is coming from the Nord C2D in this video. If your desire is to hook the organ pedals up to your recording software (DAW), you need to use a midi cable, plug it into your audio interface, then make sure MIDI devices are enabled in your DAW.

@@tkat191 It is also a possibility that you don't have the pedals on the midi channel your recording software (DAW) or iPad app is expecting. There will be settings in both applications where you can specify what midi channel you have the pedals on.

@@cjmedia_llc gotcha thanks🙏🏾🙏🏾

Thank you! 🙏🏾 💪🏾

Thank you! 🙏🏾 👊🏾 💯

Hello. It seems your pendrive isn't formatted. I provided instructions at 0.55 in the video on how to format your drive before copying the files over. If you own a Windows computer, here are the same instructions for formatting your pendrive on Windows: www.usbmemorydirect.com/blog/how-to-format-a-usb-flash-drive-on-windows-10/

Thank you, bro!!! 🙏🏾

No prob! Be sure to follow all instructions IN ORDER. You may need to pull this video up on a large screen and pause when needed. Following all instructions in order will ensure everything works correctly. ✅

🤣🤣🤣🤣🤣🤣 I was going for shock value!!!

Thank you, bro! Saw your channel just now! Dope, high-quality content! 🙏🏾... Subscribed! ✅

@@cjmedia_llc Oh man, appreciate it bro! I've been using the PCG files you shared some years ago with my Kronos. Thanks a whole lot 🙏🏾🔥

@@GordonZamor Whoa! That's amazing, man! Glad to read they are getting some use! Thank you!

Hey! I haven't played a Crumar Mojo, but I highly recommend the Crumar Mojo Suitcase model! It has both manuals (lower and upper), AND it can be hooked up to a real leslie!kzbin.info/www/bejne/hXK8hmBuo8uMf9U www.crumar.it/?a=showproduct&b=39

@@cjmedia_llc that’s the one I’m looking into it’s just not a lot of videos of it being used in a church setting I was looking into the viscount but it doesn’t sound good with the drawbars full out smh....it seems like they targeted that my for jazz because it sounds great for stuff like that.... I never blind buy anything so Im looking for someone who has one

@@hermandavid1757 Sooo...Actually the Viscount Legend OR Viscount Legend Live would be GREAT Purchases. Full Hammond setup, with option to hook into a leslie. Have you heard this clip below?? It's going through Roland amp! Also...putting any of these B3 clones through an actual leslie makes them instant contenders! kzbin.info/www/bejne/ape1e4iLdsl_htU www.viscountinstruments.com/instrument/legend/ www.viscountinstruments.com/instrument/legend-live/

Whoa!! Thank you, man! I'm honored. I am not related to Derrick Jackson, but that WOULD be cool! 🙏🏾

Thank you! 💪🏾😎

👊🏾😎... That was the MPC Touch. I ended up selling it because it required a constant usb connection to my computer.

Hey! It hasn't been tested for the Krome. I wouldn't advise trying.

@@cjmedia_llc tanx for your response

Hey man! How recently did you purchase your pedals? I purchased mine some years back, and they would short out when major appliances would turn on in my house. 🤣🤣🤣... I tried a new power cable, but that didn't work.

... and thank you for the compliment! Much appreciated! 🙏🏾

About 3 yrs ago but they haven’t been played in over a year got sick. They come on know problem with the screen but I get know sound when the pedals are pressed. I must say I’m very surprised that you Evan replied back to my shoot out. That says a lot.

@@gregorymay8567 O man! No worries! One thing to check is the midi channel between your organ and your pedals. Does the midi channel number on the pedal screen match the one set on your organ?

Hey! Soooo....If you followed all the directions in order within this video and got all the patches working, TECHNICALLY you could sample the notes in Logic, and import/map those notes to Nord Sample Editor.

@@cjmedia_llc Im not that technical i wouldnt know how to sample are the patches not ready for garage band import and use Nord as a comtroller

@@coolandmellow No, the files are not currently ready to drop into Garage Band or Nord Sample Editor.

Hey man! I appreciate the compliment. Unfortunately, I don't have the Kronos 2 anymore, OR Keyscape/Omnisphere.

🤣 🤣 🤣...That would be cool!

@@cjmedia_llc i put it on the kronos. Man you’re a Genius!!!!!!🔥🔥🔥🔥

@@eduthshakhan WHOA!!! NICE!!! I'm glad this worked out! Be sure to make all the tweaks I made during this video to ensure the best sound/playability! This makes me wish I still had a Kronos 2.

Thanks for the compliment! 1. Individual Montage Faders can be mapped to control specific Mainstage Patches. However, you'd want to make sure nothing from the Montage was on fader before mapping it to Mainstage. 2. All the sounds you hear in this video are coming from the Montage and the Motif Classic. They aren't midi'd together, as I'm playing the top board for pads/lead lines. 3. The Akai controller is used to trigger Mainstage backing tracks and control individual volumes. You could map this controller to Ableton though.

@@cjmedia_llc You are very kind responding; I do appreciate it! 1. That is so helpful man! I got so excited by the Roland Fantom and their EXTERNAL feature, but it costs an arm and a leg to get that beast. 2. At about 1:04, I hear like a sparkly EP, of which I thought was an MKS, but maybe it's the EP that is underneath your piano is the DX EP. 3. True, I might buy a Mac for Mainstage though. 😅 4. How is your signal flow? Do you send everything to your FOH engineer, he sends it back to you and you manage how volume you have on your mixer, or do you manage all the levels you play in your eyes with just one knob for the rest of the band? 5. You are a fantastic player, that Yamaha piano talks when you play man! Is it the CFX Stage patch and you made the release time short?

@@tonylancer7367 O! Just listened. That was BalladKeys, some pad, strings, and flutes.

@@tonylancer7367... and thanks the compliments! The Montage is a great board, and easy to play! The first Piano I'm playing is the Natural Grand, and minimally shortened the release time. Both boards, and my laptop are each sent individually (left, right) to FOH, then back via monitor mix. HOWEVER, what gets sent back isn't stereo, so I actually use a Mackie mixer to individually monitor my boards and laptop in stereo (I mute them from FOH). So, I get EVERYTHING ELSE (bass, drums, vocals, organ from FOH). So the first fader on my Mackie - > FOH 2nd Fader - > Stereo Montage 3rd Fader - > Stereo Motif Classic 4th Fader - > Laptop. I take the Control Out from my mixer into a Roland GO:Mixer (stereo).

Thanks the compliment! Sooo... I never really dealt with thin patches on the Kronos. I do know you can go into each patch and make it mono. You also can add a multiband equalizer to Any patch, among a bunch of other useful effects, to get exactly the sound you're looking for. I never tested this library in mono. These patches I created are not perfect, but can be made to sound like what you hear in this video. You'd have to follow all instructions in order.

Thanks for the reply! I’m not sure if you’re aware but there’s been a bit of a public outcry with how the Kronos piano patches sound in situations where you have to run the Kronos in mono (left output only). Ppl aren’t too thrilled with how the Kronos sums the piano patches in mono. That’s one of the only things keeping me from pulling the trigger just yet. Because I’m sure there will be times where I’ll be in situations where stereo won’t be an option for me.

Thank you! 🙏🏾