I just picked up the 14mm an really really dig it i did a video on it. I ordered the 35 as well

Fun, well-made video. I have this light and still learned a few things.

It took you so long to produce the next video mate

Could you use a USB hub to split the signal for OBS and software control? Also does the ethernet port output an NDI stream?

I wish the pro had a separate pgm and multi HDMI out like most other switchers

So if I purchase the Atem Mini Pro Iso, I will need to purchase the BRIDGE also ? What if I just want to record the 4 cameras in OBS, tape live and edit later before I send to KZbin?

*Thanks a lot for your great work & help!, but it's pretty bad (very annoying) that you have this problem with the audio background noise* - it is just disturbing and does not help / support the video at all.

Forgive me if this sounds daft, but can you still use atem control software if the ethernet port is used this way?

You da man for this

Does it work with Atem Mini Pro ?

By the time you buy the bridge, approx. $230, an ATEM MIni Pro ISO $500 (amazon sale), and a low latency capture card $150-200, you might as well save another $420 to buy the Extreme ISO tbh. And the upside you'll have less middlemen devices that create a lot of latency, something you don't need on a professional production. When the Mini Pro Iso first came out you always needed a bridge which was almost $180 less than buying the Extreme ISO. In the end its only a firmware/software wall that Blackmagic doesn't want to fix because its a way to up sale. The Mini Pro ISO spec wise is capable of sending video from the ethernet without streaming. They don't want to fix it because the bridge would die in the market, as it should. If BMD don't create a switcher that sends video out via ethernet without streaming someone will.

Just use a USB extender, even a UGREEN USB-C hub works

Can you use the hdmi and sdi outputs from the bridge at the same time? So two feeds?

Great stuff brother! We are building our studios out now and this was clutch! 🙏

Pro presandar

Does the $13.99 capture card have higher quality compared to the usb webcam out of the ATEM?

this is what a creative person can do..

Thank you very much for this video. All they have to do - put one more USB-C out. But now we need to buy more ATEM products to do what we want - get clean feed and our stream at the same time!

I've been running OBS and ATEM Mini Pro with a capture card since the start of COVID. Recording simultaneously on both. No need to engage two ATEMs. Even more cost effective with just one ATEM Extreme.

So this is only necessary if you want to use the main HDMI out to view the whole preview deck on a separate monitor correct?

OMG. its not pronounced like "atom". Its got a long A. Ā-TEM. You sound like a noob! 😅

I have a question, with this device you can also connect to a zoom call for example and being able to tell zoom that the camera you will choose is one the Blackmagic for example? Is there a way also to record the zoom call for example in a separate file in the mini pro ISO? Thank you in advance.

You’re genius

This would still work if I replaced OBS with Zoom, right? I’m trying to stream over the Ethernet port and (using an Ethernet switch) have the capability to output a Zoom webcam

well done man. Really well done! I appreciate you

This is ridiculous. Shame on you, Grant Petty

Noob question: why not to use recording via obs instead external drive?

Doesn't the Streaming Bridge has a USBC port? What is it for? I thought you can connect that to the computer to UBS, without needing another ATEM Mini or a capture device

Record your iso on the atem mini iso and use the HDMI out to plug into a normal atem mini and use that devices usb to webcam. That would work right? Distribution comes after that, I use NDI for routing. So why all the extra? A normal mini is a great device for capturing. Using a mini extreme iso, only have 4 sources connected, but the double usb and HDMI makes it so much better Now waiting for full HDMI 2.1 atem 😊

How about if you just buy the ATEM mini extrême? It has two USB-C ports.

In sostanza una bella markettona ad Atem…. 😂😂😂

2 Questions 1) Is it not possible to get a usb - c Splitter to send both signals to output video and then one to ssd and record like that? 2) Couldn't you just use an hdmi splitter to output to a monitor and to obs and then in obs crop the output to just the program portion? sure quality would be reduced but this would work no?

saya rasa ini tetap menarik untuk dikembangkan, informasinya sangat membantu. baru baru ini saya mencoba mengaplikasikan rtmp to OBS OUTPUT --rtmp protocol ---> NGINX on LAPTOP -- OBS to KZbin

ah man, thank you I AM SO CLOSE to getting this to work But my "on air" button won't stop blinking, i've already reset, done all the research I know to do, and it won't stop blinking and so I'm not getting signal in obs, all other parts have been tested and work and this seems to be the main issue Any help from community here, would be freaking amazing AF

Promo sm 😋

BM really dropped the ball with not adding two USB-C outputs on these. I'd have rather paid an extra amount to have that. Seems an obvious thing to have done. I was going to just add a memory card to each of my cameras as a back up, but in testing, the cameras drop the 'live' output to the ATEM when recording.

Do yourself, and all of us a favour, drop the background "music" it's as annoying as tinnitus. It doesn't add anything to the experience just deducts from it. It did stop me watching the whole thing so as well as me not learning it will also affect your income.

Promo`SM

But you lost ATEM software control, right?

like it

awesome work around!! Thanks so much!!

Can’t you just plug the PGM out (hdmi) to the capture card? Or I guess that hdmi output is being used for monitor out. Anyway, NICE!

TOO OBSOLETE - why not use the HDMI OUT on ATEM PRO ISO?

I purchased this setup but for some reason the streaming button just blinks and so the computer is not picking up the capturecard USBC as a webcam. Any ideas?

Better take your money and invest to the extreme model. Sadly was not in sight when I bought the pro ISO. Went the line already with 4 hdmi splitters on input plus a 4x1 multiviewer. SoI have HDMI pgm out of the mini available to stream with additional capture interface and to monitor with no delay. The streaming bridge has much too much of delay for serious work.

cool video Thank you for figuring this out

Do you think this process will work on a Mac the same way?

Aight. 7 minutes in and still haven't answered the question that's the premise of the video.