I wish you were out here that I can hire you to do this change for me. Here in MA .. they made me get a motorcycle license for my 2015 Metro even though it is a 49cc engine; top speed only about 33 mph.
@samsno366734 минут бұрын
I wish I could have someone like you help me with this modification; I'm handy but afraid... you're not kidding the top speed is about 35-38 mph GOING DOWN HILL AND WIND AT YOUR BACK.... the state made me get a motorcycle license for this slug... barely goes 32mph to 35mph. ONly 1500 miles since I bought it new too... and starting this back up again. Quick question: this was the first time I tried to fill it with air and I can't because the wheel rim gets in the way. I have just ordered a right angle inflator adapter.
@brendanphilbrick3013 сағат бұрын
Great information about the piston differences thank you
@kentkovack85914 сағат бұрын
Thank you very much for posting, great video, just what I needed to know!!!
@JosephStormJr5 сағат бұрын
Is there a video of the bigger rear wheel or gear up swap made?
@26brazy8 сағат бұрын
Ass
@dustyletulle214Күн бұрын
So if I am doing the 125cc big bore kit yominashi cam and I have the yoshimura exhaust whitch clutch size should I get?
@JoeStoked02Күн бұрын
I have a Longjia Vmax 175cc scooter (stock gy6 fuel injected engine) and I'm struggling to tune it.. I weigh 150 pounds, I hope you can help me with it.
@kalilinux9730Күн бұрын
Same issue with mine not starting and making that same sound. What was the issue?
@3madeampsКүн бұрын
hell yea I learned ,,, great job on telling how
@MrDigital9Күн бұрын
One stop shop. Thanks man. learned a lot . i will be buying parts here
@Start_TheArt2 күн бұрын
Will this fit the navi
@royjobe83632 күн бұрын
Couldn't pull off the backflip but I did do a roundhouse....it was pretty legit
@saullevett67482 күн бұрын
What size was it?
@rkstr19722 күн бұрын
Will this work on a Tao Tao 50cc scooter?
@RollingWrenchКүн бұрын
Yes
@keithtaylor11982 күн бұрын
That speedo looks fast
@keithtaylor11982 күн бұрын
No video of the change?
@Autonomous152 күн бұрын
maybe would be smart to put your papers in the view of the camera so we can read???
@babiidhaze2 күн бұрын
I’ll get one for SeaLevel. I’m in Florida
@johnnycontreras91573 күн бұрын
Do you have to tune this sytem after you install it?
@RollingWrenchКүн бұрын
No, full auto tune
@davidmarshall76043 күн бұрын
this really helped thanks
@CesareSpano-eb2yg3 күн бұрын
I had this problems with vacuum pumps to supply fuel on my 2 twins carbys,,i fixed with a simple eletric pump whit a relay switch to the ignition 12 voltage ,,run when engine on an stops when you turn off the engine ,,easy,,
@OmarHarchi-zh8mh3 күн бұрын
My dream life its get engine like that gy6
@FernandoMarques19763 күн бұрын
Ok, a few things match here. I have a XS1P37QMA-2A. It's a SYM/Peugeot engine. its OK on the bore size, 37mm, but acording to most common knolege the MA size doesnt even show on charts, but has 50cc displacement due to its 47mm stroke. If it is a 50cc it should be an MB, so there are things to consider wend buying a big bore like the height of the cilinder. Also this engine is an "hammer head" instead of the comon ones with a full cover, so how compatible is it with upfrade kits?
@4lifgraffiti3 күн бұрын
hi my zuma smoke a lot when is hot any idea??
@cd44254 күн бұрын
Hey were these 7.48mm shims from hot cams?
@RollingWrench3 күн бұрын
I don’t remember. I put a link to them in the description
@gearsngraphics89144 күн бұрын
I just got mine and it didn't wanna start but made the exact same sound as yours. What was wrong?
@wardified85664 күн бұрын
Personal notes: 5:45 - Spark out - Line up IN: 0.10 0.03 mm (0.004: +/-0.001 in) EX: 0.19+0.03 mm (0.007: +/-0.001 in)
@firebadgergaming9034 күн бұрын
Do you have to remove the rear fender for this air filter?
@MrJones-ti1gx4 күн бұрын
Im STRONGLY considering getting the ruckus. It looks better than the Navi. The only issue is i way 300lbs & that 49cc bike is barely gonna move lol. Im in cali & i wanna avoid having to register it & all that --it. Is there a way to have it look stock from the outside but have better internals 4 more performance? I wanna be able 2 hit 50mph w/o really straining the engine.
@cookncrack53345 күн бұрын
is it possible to get a fatty 50cc in the high 40s mph i just bought the your cdi evi. i have a fatty wheel but dont wanna put it on dont wanna be stuck at 35mph
@mzondi19705 күн бұрын
I'm brand new scooters I had to downgrade from full size motorcycles due to health reasons my wife won't let me ride my big bike anymore what would be the best scooter to buy? I'm talking most modifiable and I really don't care for the looks of the ruckus I like the metropolitan is there anything out there for that
@ashtonmajor11395 күн бұрын
I watch many Coborator videos but must say this is the Best Explained, very simple but straight forward, lol he even explained why the scooter was running in the Back gorund # A+ in My Book #Honor roll
@thesum33125 күн бұрын
You have to deal with bad weather. Safety features are not there, like in standard vehicles. If you get in an accident, you are unlikely to be protected by a scooters design.
@john_knee_pee5 күн бұрын
Hi there. Just looking for a bit of guidance.. I have a Piaggio NRG Power that wont turnover. is there anywhere i can find a Piaggio Manual for the spec of the engine as I have no clue about these bikes as always have Yamaha Aerox/Jog's. the kick has compression and my battery is fully charged, just absolutely no signs of life lol. Thanks in advance guys
@pppp-dm4cj5 күн бұрын
70cc mis range 17,5 carb Sito exaust 15hp
@GPMJ6 күн бұрын
Whats the new mount that comes with it now? And i see your all sold out on the rear rim and tire
@b3nz5466 күн бұрын
Part list, please
@yousuck100nuts6 күн бұрын
Have you tested an OEM GET3 stator? I’m having trouble testing the wires since they all run into this black box
@simonbertioli46967 күн бұрын
Ok so someone straighten me out. How do l identify a GY6 engine I have a Aprilia Liberty 150cc which has been given to me..but does not work.. So my task is to get it going So can anyone tell on the above Thanks 🙏 good video
@user-uc5tj6ux8w7 күн бұрын
Cool. A bunch of garbage Chinese parts with your logo on it.
@gammaprysem7 күн бұрын
I know im slow and late af here....but....now put it on a Navi
@choppergirl7 күн бұрын
15:20 What makes that G.D. slide go up and down? Where is the vacuum coming from to lift it up? I don't understand what's suppose to make it move up and down against the slide spring.
@maskmite17 күн бұрын
Will your gear up kit fit on a GY6 161QMK 168cc
@bigdaddybrandonspires41348 күн бұрын
Much for the whole engine
@tammyrampersad9218 күн бұрын
Can u do one one a new carburetor on a 1992 kawasaki bayou 4x4 I'm having issues like boggling out or runs out gas
@Firemandave_9118 күн бұрын
Wrong video......I need to know how to tune a fish!!