GY6 Engine Performance Mods 125cc - 232cc

[@kitakitamancing7082]

Those bearing that sit under the torsion spring, here in indonesia we named it "bearing seater/bearing spring seater" its been famous here since 2015... But alot off people cancel it due to some issue that says it may broke the spring... And the original spring seater, you dont need screwdriver to pull it up... You can twist it clockwise to pull it open... Nice work bro... Sorry for my bad english....

[@hectorvasquez693]

How much you charge to build a 150 cc motor?

[@roywalls5595]

I have been watching all your videos how to rebuild a engine and performance parts when I start my next project! Mr. Matt 💯

[@timreilly4917]

Love your content and commitment to your audience, brutha! I have many of your parts on my Ruck and love them all!

[@RollingWrench]

Heck ya! Thanks for the kind words. I appreciate you as always

[@ASLackey22]

Bro this has to be one of the most informative gy6 videos EVER!!! I’m 24 minutes in and I’m like wow. I’ve order many of these parts from you and TRS but I love how you explain how a lot of this stuff works and how to safely remove/install. You’ll definitely be getting more of my support for sure! There’s a ruckus for sale near me for super cheap I’m hoping to buy but I’m waiting on the seller to reply. If I can get this other one it’ll be my true learner Ruck since I got my current one with a gy6. I’ll try my best to build it with as many RW parts as possible!! Hopefully when they become available maybe even grab that hybrid yamaha gy6!!

[@RollingWrench]

Ah niice! I love when I can help people out! Thanks for the support 🙏🏻💯🖤

[@Utubeisazzho]

Got 2023 keepin her stock. Wish had better passenger capabilities but o well

[@DirectorDavoPaul]

Missed the live feed, I'm HERE!!!! an hour late! Grrrrr!!!!! YOU are my source bro. Helped me out sooooooo much..:)

[@RollingWrench]

Don’t worry it was just a edit from a live.

[@jameshudson9763]

Love this guy, need to hook up with you on a build one day. Appreciate all the videos

[@RollingWrench]

Thanks brother 🙏🏻💯

[@roywalls5595]

I own clutch spring compress tool I purchased from west scooter 4 years ago because I did same thing you did Matt but my bike is 250IE and put a cvt kit too!

[@RollingWrench]

Ahh! Ya the 250 is a lot harder. The tool definitely helps

[@dougparsley910]

Great video I’m a member now thanks Matt

[@RollingWrench]

Saaawwweeeet!! Thanks Doug! 🙏🏻💯👌

[@TheHandyman1313]

These gy6 bikes are far from perfect when delivered from factory, so if you get one, you do have to play with them in order to get the most performance out of them.

[@dendys04]

46:02 yes it's a nice hack before I was training to put the cover back on and it took me about 20 minutes but now with the kickstart lever hack 30s and it's on

[@roywalls5595]

Thank you again awesome video! Mr. Matt

[@yaright-d3b]

I also have some 10s off a quad I was thinking of taking a sawzzall and grinder to and turning the paddle into slicks

[@davidlockwood8703]

Brutha. I appreciate. What u do. As a. Wrencher. I know we don't always explain What we do to those i respect Your Digs what i didn't Know U reinforce I'm in the mist of customing my mdog xlong out I will def. Hit u up on partslist an knowledge.

[@RollingWrench]

Thanks for the support David 🙏🏻💯

[@katiejohnson8269]

“It should go real easy” 🔨 🔨 🔨 🔨 😂😂😂😂

[@christophersherratt7299]

When you are putting the belt on put your foot through it then compress at same time slide heel back it's a Lot easier try it

[@RollingWrench]

Great idea! I’ll try that

[@yeimilazo4023]

Hi, I'm from Cuba and I have an italics and I would like to improve it. The gy6 is standard that you would recommend putting it for daily use. Here it is very difficult to get parts and I can only do it for a friend from Miami.I love your videos

[@genelong1748]

I really enjoy your shows. Been wanting to build a Ruckus for a long time. Maybe from scratch?

[@RollingWrench]

Thanks dude! If I can help in anyway you know the drill :-)

[@hankshobbies]

That was really cool and informative

[@RollingWrench]

Sweet! Thanks Hank for the support

[@articraftic]

I love your content, and I have been watching you for a long time here in Philippines. Do you have any plan on expanding you content to another model of engines?

[@RollingWrench]

Nice! Ya I do

[@Kawaties1977]

Great Video and Always Great Content 🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉 Your The Man Matt

[@RollingWrench]

Thanks 🙏🏻 I appreciate you 💯

[@ทักษิณปัญญาเพียง]

สวัสดี ครับ 👍😍😍😍

[@marlonjulaton7675]

great very informative

[@genemaster74]

G'day m8......iv an Aprilia Sport City One 50 4T 2V 08-10 E2. Could this Kit fit my Scooter and have the same disassembly and assembly, as you have shown in this very comprehensively done vid. im a 50yr old looking at getting this moped up and running to save fuel. But a little extra speed never hurt on a 50cc😎. i just subbed and this is my first comment, hope my Aprilia is not as bad a Tao Tao. ive got it to a running state and everything works, with new Rectifier, a new CGI/coil combo and a new 24 PWK Carby plus accessories which goes on in the next couple days🤔 . Big Cheers From a m8 in Queensland, Downunder🙃

[@ReefProShop1]

Excellent videos! I buyed a brand new GY6 180cc max 65mp/h can you help me to mod and take it out a better performance and more speed?

[@Slane583]

I have some questions, don't know if you'll be able to answer them for me. The Chinese scooter I have is a Vitacci Clash, it is already a fully EFI bike from factory and the engine code on it is LF161QMK. From what I'm told it's a Lifan made version of the GY6, is that correct? Also from what my friend said when the engine code is deciphered it says it's a 175cc, but the online dealer who sells the scooter has it down as being a 168cc in the scooters specs. Which one are the correct specs? I was looking at either buying this clutch kit or the nicer Reveno when possible. Will they fit on my scooter? Does this upgraded clutch also have belt vibration when riding at lower speeds like the stock unit or do the ball bearings on the driven spring help with that? I'm just looking for some info to see if I can get some nicer upgrades for my scooter. :)

[@johnmatthewfernandez1021]

What is the rated rpm you used for the center and clutch spring?

[@TheHandyman1313]

U guys rock

[@jeffreykuch3771]

What type of setup can I get for top performance on a 49 -50cc wolf brand scooter ??

[@bigmongus5125]

Can you do a video on the 2022 venom (wasp) x18r 200cc. I’m trying to learn about it for performance upgrades and it seems hard to find what I need since most gy6 searches bring up 50cc-180cc parts. Some show 200cc compatibility, but I’m still new to this motor and some expert advice would help. PLEASE PLEASE PLEASE. I’m stressing over here

[@JonRogers-l6o]

Starting a new project this winter going to be an ice bear pmz50 50cc to 150cc should i stretch the frame out?

[@oscarmike3572]

Why doesn’t the case gasket matter why don’t you use it mines ripped and need to know if it worth to replace or nkt

[@DenRoedeMogM]

Are all the Honda Ruckus original 50cc..?

[@golden695]

Hallo Bro.. I like your content n experience about GY6. I have a question here.. I have MZ Motorrad 125 (same spec as Keeway F-Act 125). My GY6 engine code is 152QMI A type short case. Can I modify/install a B type long case to my GY6? Thank You.

[@niegalpariag9761]

Good day I'm trying to reach out to you'll but this is how I know how I brought a 171ccbig bore kit for my gy6 so my question is (does the oil ring is 2 and 1/2 teeth longer because it was harder to in back in the cylinder so I had a reputive shop try to put it in for me but after installingan running I got oil comingout ofthe tail piece I did a complete valve sealand all that stuff(2) so in future I believe I need to buy another set of piston and rings (so what contact can you respond to me I'm from Trinidad and Tobago plzthks

[@MartinTapperMedia]

I can do 9ft pounds with my hands to0, Honestly legit video super informative

[@m721ac]

Have you shipped to the philippines yet?

[@KeiPug]

I have a 125cc gy6 for my ruckus I weigh 250lbs what’s the best roller/slider weight to run for best performance?

[@tomibby]

Do you guys ship to the UK?

[@lhoiejaywenceslao1879]

you have final drive kit for italjet formula 125?? it would be a great help for my scooter

[@Medford_magnet_Fisher]

What can I where can I buy a motor on upgrade for my mud dog I have a 50 I'd like to put like 125 or 150

[@hesamusa]

Hi, I have 2 identical 2015 Zuma50 FX, one has 2000 miles on it other only 400, it's practically new, higher mileage one goes 41 but new one barely makes to 36. They're both 100% stock. Haven't been messed with at all. Do you think break in valve adjustment will do it? Thanks

[@kennethsimbapuppyeyes6857]

Have 23 tyen chinese scooter it's either 200 or 233cc will this mit work?

[@jrgongmarley1456]

I have a 80cc 4 stroke gy6 with a stock exhaust. I want to know if I should invest in a cam or the final gear for best performance.

[@RollingWrench]

Can for sure! But I would also do this : www.rollingwrenchdenver.com/products/qmb139-big-bore-carburetor-gy650?keyword=50%20carb

[@sidney9534]

14:35 Isn't it the other way around? Lighter rollers push out slower.

[@RollingWrench]

No. Lighter rollers spin out faster then heavier ones. Lighter rollers will raise the overall engine rpm, heavier rollers will lower the overall engine rpm. Think of a merry go round as a kid. The fat kid was always the last one to fling off :-) lol

[@josephyu3176]

@@RollingWrench

[@scooterTuning59]

Thank you for your very informative videos, I am now a professional gy6 mechanic 🤘🏻

[@oneplus8121]

​@@scooterTuning59 how do you lower and stretch a tao tao quantum 150cc ? And make go faster

[@leticiamejorada3363]

Hey math is the other gy6 rims like gy6 150cc/125cc/80cc are fit to other gy6

[@NOFx420x]

in the variator couldn't you run 3 lighter for take off and 3 heavier for top end ? I ask this simply because you can do that on a qmb139 just seems logical to get up to speed then carry through the top end

[@87mustang87]

Can a 150 cc engine fit on a 50 cc tao ?

[@Nitro91]

Does it matter if it's on go kart or scooter ??

[@jdub_bkv6598]

Where's a good place to have a custom ruckus built? Having trouble finding one close

[@RollingWrench]

Mayor_of_Washington on instagram

[@jbamerican_usnavy]

Do you need a motorcycle endorsement in Florida

[@ryanRKS]

Where did you get that tray you have under the engine and WorFab stand? I definitely need one.

[@RollingWrench]

IKEA lol

[@oneplus8121]

Can I lower and stretch a tao tao quantum tour 150cc? And make it faster?

[@weaselking1367]

GASKET VERY IMPORTANT FOR COOLING look what it covers at the ends

[@mitsubishichikko1250]

I understand Ryobi works for u but get something more efficient. Just a suggestion. one love

[@RollingWrench]

I have used snap on, Mac, Rayobi , rigid, Milwaukee. They literally all do the same thing, no difference that I can tell. The power has to do with the battery you choose.

[@jod5659]

I'd like to get your final drive gear

[@saulrivera1133]

I have my 150cc here is the stamp in the bottom motor can you tell me if that kit works on mine (YN157kMJ)

[@jod5659]

150cc. GY6 how much is the 171cc, kit, and final drive gear kit for the 150cc gy6

[@RollingWrench]

www.rollingwrenchdenver.com/products/gy6-gear-up-kit?_pos=1&_sid=c4b1c778a&_ss=r

[@iliveinthe80s38]

I have a stupid question there is no way to tell if an engine is four stroke or two-stroke right off the bat by looking at it right? I’m trying to locate and procure a two-stroke engine from my beautiful crap Chinese moped.

[@hydromaestro1298]

is it possible to purchase a top sec motor bloc pre-assembled ? ship to europe?

[@RollingWrench]

Unfortunately no. We don’t ship there

[@Hitech82]

So, 52mm bore with stock stroke is How many cc? I figured it's a 104cc

[@RollingWrench]

90cc

[@WTF-ti9rt]

If I do a 100 cc on a 50 cc do I need to adjust timing or spark gap?

[@RollingWrench]

Yes. But I will say there is no such thing as a 100cc. eBay and Amazon lie about the size. This is the largest kit on the market www.rollingwrenchdenver.com/products/90cc-monster-big-bore-cylinder-kit?ToPasteboard

[@iulianciocan5672]

damn .. now i wanna get a ruckus :))) or zoomer (for europe where im from)

[@yaright-d3b]

Ok so... I'm an idiot and I just build stuff out of whatever I can find cuz I'm poor but I gotta get to work soon that being said I am trying to make a cvt for this Kohler pro 27 and the scooters I found in the trash are all I got to work with....how many hp. Can a cvt handle? Or what

[@ASLackey22]

Build a ruckus. You can start with one complete and running without a title for around $600-700. Once you have one the world of mods are definitely open everywhere.

[@TheGreatest1974]

I watched the WHOLE VIDEO hoping to see the finished result and see the thing in a scooter performing better? Then the video just ended….

[@alexisolea7149]

Ask for the gear hiw many count d gear.

[@RollingWrench]

We have different option on the site per motor. No need to know the teeth. We figured all that out for you

[@joshbrown2070]

What's ur web site to buy parts

[@RollingWrench]

www.rollingwrenchdenver.com

[@jamiebizness1]

The bearings should come in a straw tube then they could just be plucked in there

[@RollingWrench]

For real!!

[@jamiebizness1]

@Rolling Wrench I suppose they could do that themselves but it would be a nice touch in the kit ;)

[@kalito3804]

Xfa has videos con subtítulos en español

[@RollingWrench]

Paste the link

[@shannonnichols4721]

Dude just do u

[@eddinek3607]

Impact wrench could damage your engine you should use tools instead

[@RollingWrench]

For me no. For everyone else , yes I agree. I’m a pro at this point, I know the strength of the gun.

[@marcosmatos8213]

You toss the Gy6 in the garbage and swap a two stoke in it.. a 70cc minarelli will bus 232-300 or the next dumb big block gy6 they manage to come up with. and if you got with a Dio 90-125-160cc 2t you will need 4 of those gy6s to catch that

[@RollingWrench]

Don’t get me wrong I love 2Ts. But putting a 2T in a ruckus gives me a Harley with a street bike engine vibes. Just odd. Not a good match. Will it be faster yes! Will it be as reliable, hell no. I can tell your die hard 2t lol

[@anonymously241]

Can I have the stock parts please 🙏🙏😀

[@RollingWrench]

I threw them away :-(

[@lucpintot7202]

American ridiculous glasses 😀

[@RollingWrench]

The good stuff

[@Dartanias456]

You talk too much, is called over explained.

[@RollingWrench]

Oh! I’ll work on that for you.

[@dlostyles2578]

Has anyone had any experience with the coolster quads Qiye engine is it any good and what compression should it be my tao tao is strong at 175 and 3 almost 4 years old I don't ride it stupid hard but I'm 215lbs any helpful answers will be appreciated

[@tomibby]

Do you guys ship to the UK?

[@RollingWrench]

Yes if you supply the shipping label