Where can I find this for sale? I’ve looked online and so far. I have not been able to find it for sale.
@jp93237 ай бұрын
I have one that I haven’t used in years. Works great but I just sort of lost interest. I’d be willing to sell it. Respond to this comment and we can figure it out.
@pasqualeinghilterra921011 ай бұрын
Costo dell'apparecchio con spedizione in Italia?
@jba004 Жыл бұрын
I'm really pleased with this! It works like a charm kzbin.infoUgkxDcr-y2Pf6xdnrFHrSP7dl9kpKaCozcSQ Takes less time than my old electric sharpener because it can take more off the knife faster, and then it smooths out nicely with the finer grit polisher. I don't know how long it will last before the grit wears away, but I wouldn't mind having to replace it every once in a while.
@notawix8542 Жыл бұрын
it good but it would be better if you ha e lower speed and a separate switch for the light
@koraycakr4910 Жыл бұрын
Do the jaws close evenly?
@MattPoeAMKTools Жыл бұрын
Yes
@koraycakr4910 Жыл бұрын
How does the metal part of the jaws spring?
@bobonysko3167 Жыл бұрын
What's the longest knife blade you can sharpen?
@amktools7214 Жыл бұрын
12 inches
@bobonysko3167 Жыл бұрын
Is the motor reversible?
@amktools7214 Жыл бұрын
Yes, the motor is reversible.
@robertmunguia250 Жыл бұрын
Looks nice!
@18B_Madder Жыл бұрын
Been researching grinders for a long time and during my months of research the AMK 77 is second to none. I have also heard their customer service is too notch. I am either buying this or the Esteem. Will be calling soon!
@RochaRolando Жыл бұрын
Just picked mine up this evening from Fedex! I'm really looking forward to setting it up tomorrow evening! Thanks!
@johnjude2685 Жыл бұрын
I been planning to build a DIY 1x30 and thought I'd be the first and your sharpening system looking great 👍 Congratulations for your design 👏 🙌 Thanks I'm not going into the business but you are staying on top. Thanks looking great Sir
@48824162 жыл бұрын
I am a knife sharpening service. Do you recommend this for this type of business? I am currently using two truhone machines and a tornek
@amktools72142 жыл бұрын
We recommend the AMK 75 Knife Sharpening System kzbin.info/www/bejne/imrFpn1mfdOnac0 amktactical.com/epages/3c926a50-9aba-43a5-9571-098ee03f1288.sf/en_US/?ObjectPath=/Shops/3c926a50-9aba-43a5-9571-098ee03f1288/Products/24
@philochristos2 жыл бұрын
That looks like it just might work.
@FullDottle2 жыл бұрын
Just got mine in and I can't put into words how awesome it is! The variable speed is a huge asset! It was also very nice to receive the Christian tract that was in the packaging! Would highly recommend!!
@capnmatt412 жыл бұрын
Nice solution for your angle control and your variable speed. It's clear you guys have thought about this.
@PursueTheUnknown2 жыл бұрын
Will be purchasing one of these in the next few months, hopefully you still make them.
@Tiger2000Lion20052 жыл бұрын
just get the hardcore maximizer...much better item
@rferrari19783 жыл бұрын
Boa noite, moro no Brasil tem o projeto desse jig
@42icee3 жыл бұрын
Good concept, but plunge lines will be of...I have attempted to modify and fix that problem, nothing to stop the blade from rocking in fixture....have also modified and attempted to fix that problem. This attachment just doesn't function in a way that give an even plunge from ricasso to tip of the blade.
@trainwon56993 жыл бұрын
Awesome machine thanks
@shabehalre7114 жыл бұрын
..
@1991bryon4 жыл бұрын
why is the belts looking like they wobble on the wheels when it runs?
@KarlBAndersen Жыл бұрын
That will be the product of the belt - not the machine.
@jeffwasinger80304 жыл бұрын
It would be great if you could make a attachment that works like this to go on you AMK 77 some how.
@jamescline80554 жыл бұрын
To complicated. Just practice hollow grinding until you get it right.
@MrMZaccone2 жыл бұрын
Nonsense. Even top-notch grinders like Jody Samson freehanded blades so idiosyncratic that to this day you can tell one of his blades just by comparing sides.
@ianmurphy90964 жыл бұрын
About the most complex and slow one out there......travis system so easy just adjust the table and go
@K3Flyguy4 жыл бұрын
What kind of money are we talking here?
@winaitohmi29594 жыл бұрын
ราคาเท่าไหร่เครื่องของคุนฉันต้องการ
@scottpinner9394 жыл бұрын
I would love to own this!!!
@curtisstewart95945 жыл бұрын
I bought one of these off ebay for $500. The build quality is superb. It replaced a Loray electric. I paid for it in one weekend at a farmers market. My go to for speed is a TruHone. But at a FM this machine allows you to put on a show which to me increases sales. I give a 30 day warranty and it takes me less than a minute per blade. My competion is usually either stones or the paper wheel. I always charge at least $2 more per blade. They dont guarantee their work and I do. If you are wanting to do blade sharpening to make $$, this machine will do it.
@Mr.Beastforpresident5 жыл бұрын
Curtis Stewart How do you sharpen Partial Serrated Edges? Where do you buy belts? What belt you start with?
@flyfishbrad Жыл бұрын
Do you still have your Loray?
@curtisstewart3179 Жыл бұрын
@@flyfishbrad Yes.
@flyfishbrad Жыл бұрын
@@curtisstewart3179 would you be interested in selling it?
@flyfishbrad Жыл бұрын
@@curtisstewart3179 would you be interested in selling it?
@ats440you5 жыл бұрын
Not a hollow grinder. Very useful for precision profiling, finger cut-outs and highly accurate finishing on folding knives. In general, edge grinders are useful for accurate grinds at specific angles. Generally a machine for advanced craftsmen.
@jasonmartin34515 жыл бұрын
I hear alot of frustration in these instructions. Must get alot of phone calls from people when they're setting this machine up. 😂
@drmarcosmancini5 жыл бұрын
Amazing product!!
@NicholasTraina5 жыл бұрын
What is the purpose of changing the wheels?
@3dprintingcave7785 жыл бұрын
with a vert grinder you can do the hollow grinding doesn't look like that's possible here on this one
@3dprintingcave7785 жыл бұрын
what is the pros for a horizontal grinder over a vert one
@genesmith92385 жыл бұрын
What the max rpn
@livydman5 жыл бұрын
Can a rotary platen be installed?
@johnsmith46305 жыл бұрын
fact is that the angle guide system will result in a variable angle on curved edges. The angle at the tip will be slightly different than at the base. It would still provide the consistency to make a fine edge, of course. It is just that it might not translate well to a field sharpener.
@KarlBAndersen5 жыл бұрын
Do the corner/small wheel tool rests go in and out to keep the rest close to the contact wheel?
@KarlBAndersen5 жыл бұрын
@@amktools7214 Does the flat platen adjust inward if I wanted to cover the platen with a ceramic liner 1/4" thick? That would be crucial to me.
@KarlBAndersen5 жыл бұрын
@@amktools7214 Thanks for that. It's hard to tell as there is no straight down view in the video or on the web site.
@KarlBAndersen5 жыл бұрын
You guys should set up at the Troy hammer in every summer. It's an ABS event for three days. I just saw you were near Dayton.
@themonkeydrunken6 жыл бұрын
ITS $750 come on man
@ChristopherSalisburySalz2 жыл бұрын
Now it's 850! But if you compare to the tormek, just the machine is 850 and all the jigs sell separate and cost a fortune. I bet by the time you go all the jigs you would be $2k at least. Place wheel maintenance looks annoying and the wheels are hundreds.
@MarthaTorres-gu7vd3 ай бұрын
@@ChristopherSalisburySalz. Only thing I've seen close to this is 1400. This looks better then that one.
@finnykroznizc22166 жыл бұрын
*I got this last week and used it already for pipe making/shaping. It is good for shaping briar blocks for pipes after initial block cutting. It is not noisy, and works very well.>>>**0rz.tw/p5d0** There is not much assembly required and it is very easy. The only caveat to be aware of is that the plastic dust cover under the round sanding disk table has a notch which makes it impossible to screw into place - manufacture mis-measure of this specific plastic part. You will need to get a small file and file this notch off then it goes into place as smooth as butter.*
@bfflorida23116 жыл бұрын
Nothing new.. just slightly improved... kzbin.info/www/bejne/rJWaZIKcm9WjkNk
@fabiandaroca6 жыл бұрын
WOW! I will be looking into one of these.
@chrissorensen26186 жыл бұрын
What motor is that? I'd like to source one for another project I'm working on.
@Servant_Friend_Son6 жыл бұрын
Just received mine. This thing is heavy duty and solid. Best money I've spent in a long time. For a blacksmith/knife maker this is a game changer from hand filing and hand sanding to this. I work 60-70 hrs a week so the time this will save me is invaluable. Thanks Allen for making a reasonably priced quality American made product. God bless