Thx for the video! Great details about the bike. You happen to have the old handle bars laying around? lol Those kids size drop bars are a challenge to find.
@Shelbythegymnast5 ай бұрын
Hi mr.scott! This is Shelby. From synergy sports. Maya friend. Just wanted to let you no that I love your chanle
@wileecoyote57495 ай бұрын
Bro,a Metropolitan II DOES NOT GO 30. Its capped at 20-25. The regular Metropolitan does 35-40
@janiemiller8256 ай бұрын
What if it’s the 2013 Honda metropolitan scooter 🛵 & has no carborator?
@cediwilliams50597 ай бұрын
Great video! Can you please share the links for the parts? Bars? Brake levers? Shifter components? Thanks!
@scrambler69-xk3kv10 ай бұрын
I watched one video of a gentleman and his wife who purchased a used Metropolitan that was slow as well. He removed some type of restrictor in the carb that looked like a credit card with a hole in it that was smaller than the intake, it was some type of restricter. After he removed it the sooter almost reached 40 mph.
@tahahamz11 ай бұрын
Я имею аналогичный скутер honda scoopy .
@nitenerd Жыл бұрын
I’ve had so many issues with my 2020 metropolitan, bought it brand new off showroom floor. Exhaust pipe broke in half and I lost the muffler- the spark plug was stalling the moped in wet conditions. Got a bubble in my tire and then had a bent rim- replaced both. I’ve laid it down three times and it still runs- so I’ll learn to fix everything I can and I’ll sell it and buy a 125cc next. Right now I am trying to put end bar mirrors on- but can’t figure out how to get the end of the grips off to instal the new mirrors
@Lizpolygigiblissgirl Жыл бұрын
my '06 metro will do 37mph, will not go faster even downhill
@kevinraymond98122 жыл бұрын
I bought a metropolitan for my brother. Recently the starter switch does not turn on the lights or start the moped. You can kickstart it and all the lights and everything work when you kickstart but if you turn ignition key no lights no nothing the battery is good. Any suggestions would be helpful thanks for the video it’s been helpful
@keithwong76832 жыл бұрын
Thanks for the good work. I have a 2013 ACE 24. The previous owner installed Sora C-brakes and 105 rear derailleur. Flat bar was also installed so my bike is now pretty much like a Fuji Absolute 24. Your video really serves as a guide to me. The rear wheel on mine does not spin very well. After losing the screws on the rear axle a little bit, I find that it spins good enough so I do not proceed to take out the bearings for cleansing.
@edwardmartinez94772 жыл бұрын
I hear that there is a restrictor plate between the intake manifold and the carburetor.
@kenniitran2 жыл бұрын
Thx for a nice sharing vid. I also bought a used 2003 Honda Metropolitan in very good condition which I don't need to fix anything. And I can ride it over 40 mph easy and I don't know if previous owner had done anything special to it or not.
@zongindibaza42623 жыл бұрын
Mr Scott I have a question to you I had bought a scooter 50cc ncw and it's 2019 honda metropolitan it runs good perfect the problem I noticed is the left of of my scooter a bracket that holds the engine its broken and is aluminum s how do I find people with experience of aluminum Welding I'm in Atlanta I just same scooter that you fix I can wait to see the part 2 after you bought a new capurator
@kaydencrooks27903 жыл бұрын
Hmm could have been the idle screw or perhaps u torqued down the jets a bit too snug.
@MirchiBoy3 жыл бұрын
I don't understand the thumbs down on this video. Your channel is awesome. I hope you keep putting out content regardless of what the KZbin algorithm wants to do
@stevenguyen49673 жыл бұрын
Do you still have the bike? You also need to change out the variator, weights to 4.5 and 5.5 rollers or sliders, get rid of the air box and replace with an intake tube/filter, buy an exhaust, and lastly, add the NCY cdi to get rid of the rev limiter to maximize top speed. Hit me up if you need more help
@jhonnymorta4395 Жыл бұрын
How to reach you? 2002 honda metropolitan is only having a 30 kmh top. Full throttle bogs down too
@richardburnett27493 жыл бұрын
I'm getting 135 miles per gallon on my 2022 Metropolitan fuel injection
@rrhistorian88282 жыл бұрын
Get ready to replace the fuel pump. The new fuel injected NCH50’s have faulty cheaply made fuel pumps. Not typical Honda quality, that’s for sure.
@donnyconny35233 жыл бұрын
So great to finally see another Chrysler 135hp outboard running. I have a 1974 that runs good but I had to learn a lot to get it running well. I have a video of it running on a Lake in North Central Pennsylvania.
@javierbastias73933 жыл бұрын
I have another 135, from 1977, complete overhauled and painted. It runs great!
@donnyconny35233 жыл бұрын
@@javierbastias7393 I'm trying to figure out if my 135hp Chrysler is running right, my boat weighs about 1700lbs I have a 13x17 three blade prop and it runs 35mph @ 5200rpms, I also ran a 13x19 prop it would go 42mph but only 4800rpms. Also only getting about 3-4mpg depending on how much weight is in the boat. Does all this sound about right? What kind of number do you get on your boat. Incidentally I know where there is a for parts 1977 135hp Chrysler for $200. I would have bought it already but the whole lower end is different that my 1977. Man I would really love to sea pictures of your restored 135. I have a video of my 135 running right after I got it. kzbin.info/www/bejne/aquapJhtn9WZnck. I have done a lot to it since then. People say to just run these things but I'm afraid it will just die on me some day and then it will be a boat anchor.
@lisaderwent41952 жыл бұрын
Does anyone know where you can purchase parts for this type of motor . Please
@mechanic47443 жыл бұрын
So old runs better than my engines
@red95sdime3 жыл бұрын
Restrictor plate where the intake bolts to cylinder head. It makes an 8-10 mph difference.
@d.n.36524 жыл бұрын
My only complaint is the short battery life. And it takes 2 hours to charge. I check the website to see if they sell a battery with more life, and they don’t. If anyone knows where I can get a better battery with more life, I’d be happy to know
@Chrisphan20014 жыл бұрын
Thank you for the review!
@philippeterson75034 жыл бұрын
I returned it to Costco. Right in front of me in line was someone else returning it.
@silverwindspirit4 жыл бұрын
There's something I'm getting right with this drone. When I turn it on, it just flies upward irregardless of what I do with the joysticks. What am I doing wrong here?
@omaritter87654 жыл бұрын
L
@Poosai4474 жыл бұрын
I have this drone but it is able to hover I got it at our local twin falls Costco plus it has much longer battery and better camera!
@gvanac04 жыл бұрын
Help please!! I cant figure out where the password is for wifi pairing to my phone, would you please help me
@gvanac04 жыл бұрын
Neverymind, sir, I have finally figured it out, thank you.
@seanbedson35344 жыл бұрын
I have the same drone (duh)
@ronniejohnypil81204 жыл бұрын
Sana may mag comment dito tagalog may itatanong lng sana ako😂
@chickenrox89264 жыл бұрын
Dumbest fucking drone ever I’m so pissed I ever bought it
@pengzhao43094 жыл бұрын
looks like in frederick costco lol
@PapaSherm14 жыл бұрын
You're not really an RC pilot if what you're flying won't crash--- don't blame your lack of skill on the drone. Acquiring any skill requires effort, aptitude, and patience but in this "everyone deserves a trophy" world some folks cry foul when faced with an actual learning curve. Man up and learn to fly_____
@jasonh85424 жыл бұрын
What drone would you recommend for a beginner?
@aeldallkushi58824 жыл бұрын
Dji Mini 2, it is VERY reasonably priced in the drone market, it is the Easiest thing to fly, and it captures some amazing footage, but you shouldn’t just give it to a kid, you have to guide them. Hope this helps
@Mr.Cool.Dragonpresent4 жыл бұрын
I agree, it's quite unstable and cannot stand in one place. Very painful.
@Jankuso194 жыл бұрын
Thank you for your review. I've just seen this advertised at our costco.
@yohanesberhanu8404 жыл бұрын
Please don't waste your money. It's craps
@johndeeretech104 жыл бұрын
One thing to look for is a small restrictive plate between the intake manifold and the cylinder head. It just cuts off the air flow. Another thing you can do it install Dr. Pulley sliders in the primary clutch. You use 9 gram sliders if you’re about 200lbs or 11 gram if you’re under 200. That will help acceleration tremendously and help it hold speed up hills better. But first look for that restrictor plate.
@noahbustamante56504 жыл бұрын
Because it’s meant for a racing drone it’s not like a Placher it’s like a racing drone that’s why it’s unstable it’s speed and stunt
@koyekoye42394 жыл бұрын
Start repair video show
@martylynchian86284 жыл бұрын
I hate to be the one to break this to you but I think your wife was cheating on you with perhaps a black man as your kid does not look like he is related to you.
@lovelife29964 жыл бұрын
How low can you go... ever thought of that the kid might be adapted.... Marty Lynchian keep your thought to yourself instead of noticing the drone you went beyond JUDGING have you seen the SPECK IN YOUR EYE..... so I guess your perfect NOT!!! YOU MAKE ME SICK!!!
@martylynchian86284 жыл бұрын
@@lovelife2996 I am just making a common sense observation not trying to " judge' anyone as you put it.
@pauldunnsr.55974 жыл бұрын
sounds like you have experience in this with your wife? You are an idiot
@KILLAZ.84 жыл бұрын
When I press the button it doesn’t fly
@thirdyrey214 жыл бұрын
What app do I use for this?
@timcallinan4 жыл бұрын
Hi Scott, I bought a metropolitan 2 scooter too (2003). Mine went max about 20 mph before I started messing with it. There is a restrictor plate between the carb and the engine which will increase the top speed. The next mod i completed was to replace the variator with a polini 50cc variator. This definitely helped. I can get it up to about 30 mph now so Im looking for the next steps. You probably know this already. Tim
@franklintheman83105 жыл бұрын
I considered that till i read reviews. Went for the Holy Stone HD161 just a few bucks more and so much better for a beginner drone, plus way better camera
@cldavis335 жыл бұрын
Same experience, cannot seem to get it to stay still in a hover, just basic thing here. It didn't always respond to down throttle very fast, and forget it in any wind. Just wanted to see if it was any good. Tello for 89.00 is the real deal. I am going to just buy a better drone.
@black79montecarlo1235 жыл бұрын
Tello is terrible in the wind too. Look into the Promark GPS Shadow. Basically a Phantom.
@4toconvert3895 жыл бұрын
How do you calibrate it? Would be useful if you did a how to calibrate and fly video. Agree it is a frustrating gadget.
@kbomb255 жыл бұрын
The buttons on the controller that surround the joysticks are the "calibration buttons". In essence they simply adjust the beginning position of the joysticks. So it's kinda like it's holding the joysticks in the ideal position for it to hover more steady without you having to actually move the joysticks. So you you would have to continually calibrate it to account for any new breeze or wind. Hopefully that made sense.
@cleo-thecat37985 жыл бұрын
Dude it’s crap Edit: worked 2 times for me then one of the propellers stooped working
@dhhdhdbxndb53005 жыл бұрын
Cleo -The cat yea same
@melrobinson875 жыл бұрын
I got one but a different number called 2 0 snap drone