Hello, I have a 2014 mercedes benz w205 c250, but there is no car play, how can I activate it, thanks?
@P4ULM4CАй бұрын
I've got a ntg5star1 apple car play works but android auto doesn't. I can't get into engineering mode I can get into the other mode by pressing phone down 3 and * any ideas
@danjelrexhaj8329Ай бұрын
Hey does this work on ntg 4.7
@gonzalom.2428Ай бұрын
Hi, I have a GLA 220 2017, the hands-free Cell Phone does not work, could you guide me on how to solve it from engineer mode or another way.
@MarcoAlcnАй бұрын
It works for c43 2017?
@amirmohsen20122 ай бұрын
Need you help to get that menu for w205 or c180 i have NTG5
@alexpadlipski64982 ай бұрын
Tried calling the engineering mode far and wide with no luck. Made reset both dash and command at least couple of times. Any clue? w212 late 2015
@hemanpohАй бұрын
Same issue here
@ramsin.Ай бұрын
@@hemanpoh Lucky for the both of you, I can say that this method doesn't work. I've got a 2016 212 and had to enable the Engineering menu using Vediamo and a Tactrix cable. The options aren't there....well for carplay anyhow, they are for Android, but grayed out. No option to enable logging. So...that is all to say that you need DTS Monaco.
@jasonmiller85352 ай бұрын
Hi there, just purchased a 2018 gla 220 amg premium it has the usb in centre console pocket and the mouse in centre console. Just wanted to ask if this will work the same for android auto on my vehicle ? Cheers 👍
@bertholio0072 ай бұрын
Hi mate. Followed your guide and I bought the right usb. Wont show at all despite a reset. Any advice?
@Bobby_The_Retrofit_Nerd2 ай бұрын
Can you make a video upload it and let me know when you have I take a look see what I can help with
@bertholio0072 ай бұрын
@@Bobby_The_Retrofit_Nerd I think it may need a firmware upgrade on the unit itself.
@bertholio0072 ай бұрын
And when I go back into engineer mode the CarPlay option resets back to off.
@ArturSobotka-qy4je19 күн бұрын
@@bertholio007Hi, I have the same problem. Did you solve this problem?
@bertholio00719 күн бұрын
@@ArturSobotka-qy4je need CarPlay already in the firmware I believe. I went aftermarket unit in the end.
@sergheiionas51083 ай бұрын
MB A class 2016, can’t enter in the engineering mode, holding the 3 buttons and nothing
@Babyparkerr2 ай бұрын
Same here ours are locked
@nathan53183 ай бұрын
I've got CLA 200D shooting brake from 2018, i have tried to put these "ON" but they keep get reset to "OFF" ?
@twister3602 ай бұрын
Same for me…. Found a Solution?
@DonovanBrown-eg9lz3 ай бұрын
I'm in the USA will it work with a 2016 E350 matic
@serced_yt3 ай бұрын
I have a w176 from 2016 (c-class). For me the car play and android auto also go back to off, though if I change the CI screen to type to, this saves and shows the amg logo on restart. I believe the key to saving is actually keep pressing the "on" wheel and this restarts the computer. Though as mentioned, for me none of the things worked for android auto/apple car play. Any ideas what's going wrong?
@Bobby_The_Retrofit_Nerd2 ай бұрын
Can you make a video I and upload it to KZbin I might be able to help you still
@A.Musa763 ай бұрын
I have the command NTG5/NTG5.5 (Option Code 531) in my W166 2016 GLE. I been trying to get into the Engineering menu for weeks. Learn something new I need to be in the Setting mode first before I can do the hang up, 1+ # together? I guess I will try it again.
@gusgus81133 ай бұрын
I have same car, any luck activating?
@as678902 ай бұрын
I have the same car, did you happen to get carplay activated?
@ec97193 ай бұрын
i just bought a 2018 gla and the dealers i called were absolutely clueless and truly useless. You, mister, are my hero! 👏 👏 👏 yay you!!!! thank you thank you! everyone needs to be sure they wait til the humming stops and when you restart your car, plug phone in and then restart it so it doesn’t pixelate like it did initially for me. anyway… thank you!!!!!!
@kirldrav4 ай бұрын
I tried all of this today on GLA 2017. Initially the engineering mode was not getting on by pressing 3 buttons at a time. Then I did factory reset on both dashboard menu and radio unit. Upon that I was able to enter it. But then after performing all steps, car play didn’t appear in the menu, even though I am sure I pressed Set Page, and system responded. When I entered settings again, values were like if I didn’t change then at all 😢
@Bobby_The_Retrofit_Nerd2 ай бұрын
Some times it can take a couple of go’s I even had to reset the radio couple times but it will work eventually
@P4ULM4CАй бұрын
Does resetting the radio wipe off my apple car play which was added from factory
@naimmuti19 күн бұрын
Did u find solution?
@kirldrav19 күн бұрын
@@naimmuti yes. Eventually I bought MB NTG5S1 activation tool, plugged in socket and voila. Easy and everything works as it should.
@naimmuti19 күн бұрын
@@kirldrav if you have link may I have it?
@hervindaiu41184 ай бұрын
Does this work on W212 2016 NTG 5.0
@Bobby_The_Retrofit_Nerd2 ай бұрын
Unfortunately not sorry
@santospvpmore33655 ай бұрын
Classe A250 w176 11/2015 we can make too with this car ?
@taras88575 ай бұрын
Will this work on the w212 e350 2016 year in the US car?
@zuraelizarashvili67405 ай бұрын
i did everything correctly but Apple Carplay and mirrorlink goes off again i checked and mirrorlink is available as an option in TEL, but apple carplay not
@Bobby_The_Retrofit_Nerd5 ай бұрын
You might need to factor reset the unit this is how I fix this problem
@rudeboy64h5 ай бұрын
Good evening does this work on W212 2016 NTG 5.0
@hervindaiu41184 ай бұрын
I have the same model ,interested to
@Top.15275 ай бұрын
Can we do it in cla 250 2016 year
@tomislavdjapic16436 ай бұрын
hi I do everything as in the video, but it doesn't save the changes can you help me
@jackalwoo41355 ай бұрын
I have the same question, have you solve the problem now?
@serced_yt3 ай бұрын
Any update from you two? I am also trying. It saves the AMG screen type change but not car play or android auto.
@jackalwoo41353 ай бұрын
@@serced_yt I've already solved, you need to buy a device to active the car play
@mr.mathiarsu88267 ай бұрын
Can it be done with e250 w212
@RT722237 ай бұрын
Cla de 2015 do 05 nao funciona certo ?
@tonyblack34018 ай бұрын
How to find out my NTG number?
@tiffanydejesus55638 ай бұрын
Hi, I tried following your steps but I see in your comments it said was retrofitted… where can I get that done for my gla250 I have the ntg5.1 stereo
@ManishKhimjiАй бұрын
I offer it if you haven’t already got it sorted
@reneborn85848 ай бұрын
I am a bit confused! Does it work for c207 audio 20 ntg 5*1 or only with command ???
@Bobby_The_Retrofit_Nerd6 ай бұрын
This video is for the Audio 20 5*1
@matyasnemcsik84225 ай бұрын
I have SW 164730 version. NTG5star1 Can not enter to engineering mode! What could you recommend to do ? Thanks! :)@@Bobby_The_Retrofit_Nerd
@joshobrien28708 ай бұрын
You can just have it coded if you have the ntg 5.0 or above
@popssinor89216 ай бұрын
how do you check your exact Ntg version using the unit itself?
@lukushowlett6 ай бұрын
@@popssinor8921yeah… you can’t 😂 you need to activate engineering mode before then pressing 1+hangup+#
@aaronmoran76459 ай бұрын
The issue I am getting is that I have the option for CarPlay. I plug the usb in and the recognises it as a CarPlay connection but then can’t activate the phone
@Bobby_The_Retrofit_Nerd6 ай бұрын
Plug it in then unlock your phone
@sonkarma10 ай бұрын
Hi i have b class 2015 model with ntg5*1. I tried many time pressing to all three buttons at same time but it don't go to engineering mode as you said. Thank you
@Bobby_The_Retrofit_Nerd10 ай бұрын
it might need unlocking not all units are unlocked to engineering mode but it dont take much to do
@93GrayWolf939 ай бұрын
@@Bobby_The_Retrofit_Nerd do you have an intructional/link on how to do this?
@Bobby_The_Retrofit_Nerd8 ай бұрын
@@93GrayWolf93 in the bio
@antovida5 ай бұрын
Id you can’t enter engineering mode you have to reset you system first and the simultaneously hold “hangup+1+#”
@ishnavinbrar538710 ай бұрын
Hi man , could you share how you manage retrofit Ntg5*1??
@Bobby_The_Retrofit_Nerd10 ай бұрын
IM currently doing this on MHH Auto
@MarcinNewport10 ай бұрын
Mercedes Benz GLA 220d AMG line 4matec Premimu +2016 no working Android car pały nad Apple
@koroshkabir90411 ай бұрын
Is it possible to activate carplay and android auto in ntg5.5?
@A.Musa763 ай бұрын
You need to look at your vehicle built date (My 2016 GLE w/NTG5.5 was built on November 10, 2015). There was a transition where they updated the firmware/software I think it was built after January 8th, 2016 is when they had car play. I'm going to see if it's in the Engineering menu first. If it's not there. You and or I need to update the firmware/software first.
@iam.erminmАй бұрын
@@A.Musa76 hey have you had any luck with your case? I have the same one, but I can't even get into engineering menu
@xlishman751511 ай бұрын
How do I find out which system my car has? E220d 2018
@xlishman751511 ай бұрын
I don’t have the number keypad on my radio, it’s a newer version I think
@raybokor211 ай бұрын
2 questions .i dont have the tunning function on my radio is there a click button on the menu for that . 2.what about android autoplay ? thanks for any help. p.s my car is a b220d 2016
@raybokor211 ай бұрын
failing that can you recommend a cheap easy it install android unit
@Bobby_The_Retrofit_Nerd10 ай бұрын
What radio do you have ?
@shalli2111 ай бұрын
Car A Class W176 2017 Model: A200 CDI Can you confirm this will work please
@Bobby_The_Retrofit_Nerd10 ай бұрын
If it has NTG5*1 yes but if fit with NTG4.5 unfortunately not natively
@alendebeljak573511 ай бұрын
Too bad it doesnt work :/ It is jumping to OFF even if you are not leaving the “engineer mode”. When you change a page it automatically comes OFF again…
@Bobby_The_Retrofit_Nerd11 ай бұрын
i have also found my self if you change a setting and set it the change page it removes what you just changed. that is why once you have set it return to the index menu turn of diag mode the remove key from the car then get out the car lock the car walk away giving it time to shut down the sub systems after waiting some time you it should have saved. but like i said this dont work on all updates of the headunit and is yours a 522 ?
@alendebeljak573511 ай бұрын
@@Bobby_The_Retrofit_Nerd Tnx for the answer. I only know that I got NTG5Star1. Where can I check which update is currently installed?
@YahorPalishchuk10 ай бұрын
Having the same issues on my side, also tried to go back, disable diag mode and then turn off the my car.. unfortunately doesn’t work 🥲
@serced_yt3 ай бұрын
@@YahorPalishchuk Anyone here had any luck? For me it also goes back off and does not save. Though the CI screen type 2 stays saved and shows the AMG logo on restart. I don't care about that one tough, just AA and CP :(
@YahorPalishchuk3 ай бұрын
@@serced_yt try to reset to the factory settings and use obd activator. I bought it on Amazon and with 30€ solved any problem 🎉
@user-ct1gc5pn9p11 ай бұрын
Can this work for a 2016 c class?
@Bobby_The_Retrofit_Nerd11 ай бұрын
depends if you have a audio 20 522 this can work on over modes but for 100% this wont work on a NTG4.5 with out retro fitting a aftermarket device
@BrianTheeFirst2 ай бұрын
@Bobby_The_Retrofit_Nerd where can I check this
@ankurmahajan280911 ай бұрын
How fo we turn on DIAG mode on Mercedes Benz C350e? 2017 model
@Bobby_The_Retrofit_Nerd11 ай бұрын
do you know what model radio ?
@khazarouf4 ай бұрын
@@Bobby_The_Retrofit_Nerd I believe the radio model for the W205 c class is NTG 5.0. Is it possible to activate Apple Carplay on this?
@north-nomad11 ай бұрын
Thanks for the video. Can I change Japan Radio to Europe via this menu?
@Bobby_The_Retrofit_Nerd11 ай бұрын
i believe it requires a software update but don't hold me to that as its not something i have done before.
@Me_You_22 ай бұрын
Yes, this what dealer told me. I am about to buy japan import from a dealer. He said that new software will fix the issue.
@johnandmerin11 ай бұрын
Step 1 itself not working for me, can’t get the menu
@Bobby_The_Retrofit_Nerd11 ай бұрын
Is it doing anything? At all ? As it could be you need to unlock engineering mode with vediamo or a factory reset
@hardeepdhillon3992 Жыл бұрын
It just goes back to off again after I do it. Is there a way to stop this happening?
@Bobby_The_Retrofit_Nerd11 ай бұрын
i just add some more info hope this is help full thanks please check description.
@BryanGenesoni9 ай бұрын
After cheking description still dont work
@Eskipsilat Жыл бұрын
It jumps backs to off again 😑
@ErossaanBooming Жыл бұрын
same here, changes are not saved ...
@Bobby_The_Retrofit_Nerd11 ай бұрын
i just add some more info hope this is help full thanks please check description.
@tomaskanci8108 Жыл бұрын
Its possible activate for w221
@Bobby_The_Retrofit_Nerd11 ай бұрын
what model stereo do you have please i will try my best to help
@KyrieEleisonMe Жыл бұрын
Didn't work for me 2016 200d
@captaintyz1288 Жыл бұрын
I have the same problem I actived it and when I turn comeback it’s disable
@KyrieEleisonMe Жыл бұрын
@@captaintyz1288 yeah same with me
@olliejspurway Жыл бұрын
@@captaintyz1288 me too! how do you get it to stay selected?
@Bobby_The_Retrofit_Nerd11 ай бұрын
i just add some more info hope this is help full thanks please check description.
@Kremersino Жыл бұрын
is it possible to activate auxiliary audio source ?
@Bobby_The_Retrofit_Nerd11 ай бұрын
i personally have not came across this as a option in the NTG5*1 but this can be had with a aux to Bluetooth adapter now if your talking about the NTG4.5 audio 20 or command this can be activated very easily wish you find with a quick google search sorry i cant be any more help