all lib install correctly then also no display , please solve my problem
@yxyk-fr3 күн бұрын
kzbin.info/www/bejne/hoSUdKiXjtB3ibM you can "finetune" the frequency by changing the power supply, the oven temperature and also... the signal's output impedance : the load can also affect the whole thing ! Other things also affect the precision, but then you become a "time nut" :-) kzbin.info/www/bejne/qJq4iZ6OgNZ5oNU
@yxyk-fr3 күн бұрын
7805 is "old tech", you will find better regulators with much less noise. And noise is to be avoided at any cost in oscillators 🙂 So at least add a "Pi" CLC filter network with both electrolytic and ceramic capacitors to remove any ripple or noise. I don't know about the noise figure of the TL431, but it's as nice touch. Add a ceramic + inductor filter at the input though 🙂
@ElectricalPro2 күн бұрын
Thanks for the suggestion, I had to choose 7805 or a switching voltage regulator, I chose 7805 because I thought it would have less noise. 7805 is a "jelly bean" part and I have plenty of them. Idk what would be a modern alternative with low NF. I use 7805 for GPSDO but it has CLC for OCXO so no problem I guess. And TL431 should not be here too, a good 4V reference should be here with a known temperature coefficient, probably something like LT1461. You are right of course, my idea was just to show that it's possible to calibrate OCXO with a GPS module.
@MorrisLiveProductions4 күн бұрын
love you post, i would really like to contact you for help on how to integrate your finding in my video production network
@MoreChannelNoise5 күн бұрын
I liked the video content but PLEASE not so loud backgrouind horrible music. Why so many videos do this !!!!!
@apsingh185 күн бұрын
After such a long time brother. Welcome.
@ElectricalPro5 күн бұрын
Once a year at best, but I try :)
@kayezero7035 күн бұрын
Thanks man It works but i used a 3yx fhf 10n60 mosfet insted and It works the same
@Green-hh1zz10 күн бұрын
Is it possible to access the camera's footage if I am not connected to my router's network?
@UdayaRai-mo4ur13 күн бұрын
Udaya👍👍👋👋🙋🙋🔋🔋💡💡
@Amar-qc3ww16 күн бұрын
I liked the video for the lengthy work you did, and saved my time.
@RomanRamzan16 күн бұрын
Fack video
@znul15 күн бұрын
its real
@GothGuy88519 күн бұрын
you could swap out the 2nd resistor for maybe a 10 Ohm variable resistor, so you can vary the flash speed.
@MRrwmac19 күн бұрын
Thank you very much for a well made and interesting video! I Hope noone broke into your backyard or jumped over the fence! I know this is an old video and was wondering if you had any newer small cheap wi-fi camera you could recommend. Especially if you made a more recent video. I have four outdoor survelance camera connected through ethernet and a POE to my (non wifi) Lorex Survelience system and it has been working great for over 8 years without a problem. I want to connect two indoor small hard to detect indoor cameras but can’t run ehternet to the locations I want to put them at. So I need wifi and I want the cameras to be hard to see (so any thief would not steal them). Anyway, my old reliable Lorex feeds me live video outside my home when I am on vacation. But I’m having trouble getting it to identify a wifi camera connected to my router. An IP camera and/or Onvif camera might work, so your camera idea may work unless you know of something better. Please reply! Thank you again!!
@makailaririf_.903821 күн бұрын
thank you very muchh, it's workkk
@typeAR25 күн бұрын
@Electrical Projects [CreativeLab] , I got same camera (Trust Spotlight Pro Webcam w/ LED Lights) and I removed the IR filter but camera still shows same/ normal image/video, may I ask if you are using any specific software ?
@Kyleplaysgames56728 күн бұрын
My projector has two hdmi ports. One of them faulty and gives flickering pink pixels where there is supposed to be white. I wonder if it's something as simple as a loose connection. Whatever wire that shows green has a weak signal, so it only shows blue and red which when combined looks pink. The other hdmi port is fine.
@taev901628 күн бұрын
it's the electrolytes that are conducting the electricity, and since electrolytes carry charge; the higher concentration of electrolytes in a solution, the higher its electrical conductivity. And you can see this at 0:45. Also sugar is non electrolytes that is why it didn’t dissociate into ions
@taev901628 күн бұрын
this absolutely impressive thanks for sharing
@Avidiy28 күн бұрын
PLEASE ANSWER ME I WANT TO MAKE THIS: 1. What value resitor i can i use instead of the light bulb. 2. What class is it? As in class A, B, AB, D etc.
@Planets_BeyondАй бұрын
Hey bro will it work on 9v battery and what would be registor value for 9v battery
@nish8747Ай бұрын
hi sir, i have a little problem sir, why clap its not detected at audino, but if i touch sensor audio, its can😅
@madumalsamarasinghe2946Ай бұрын
Thanks you
@tomidabjakoaudytorprzewazn8853Ай бұрын
What is this ESP firmware that displays on the website all the things you showed in the video?
@drsaraji1Ай бұрын
Sorry. I am a novice. Can I use this method for a sealed battery without lids? How do I know when the battery is fully charged? Thanks.
@paolasilva-rodriguez6923Ай бұрын
what is your background music called
@juanchoboosther7893Ай бұрын
Buen vídeo.. 😊🖒
@JoeSam-i1dАй бұрын
What does the NPN NC 547 function
@samithetechsavvy6485Ай бұрын
thank you very much , very useful and helpful demonstration
@contatophbio9080Ай бұрын
KZbin propaganda = terrorism
@aytacdede81Ай бұрын
I bought some mosfets from aliexpress to change them into an inverter. I'll tell you that the circuit originally uses CEP76139 (30v 75A N Channel) I wanted to put Irf1404 and they didn't work, then I bought CEP83A3 and it didn't work either and then I bought CEP93A3 and it didn't work. Finally I bought IRFP7540 from another platform and it worked. I don't know if it's because of an imitation mosfets or for another reason. These mosfets don't work. Do you have any experience? Please leave your comment. Thank you very much.
@TravisSelfmade-w8tАй бұрын
so you teach people to ELECTRICUTE themselves all while playing unnecessary annoying background noise and barely being able to understand you ...
@Godzilla-vw4vuАй бұрын
I like your video, i want to learn basics thank you
@Sor3x_the.OriginalАй бұрын
Very nice thx ❤❤❤❤
@paolasilva-rodriguez6923Ай бұрын
what song is that
@johnnewman3221Ай бұрын
could you make a video of UV light using camera
@santhanasebastian6041Ай бұрын
Tq for the positive words sir 🙏
@jameselliott9397Ай бұрын
Do stepper motors run cooler with driver is set to less steps per revolution? Do stepper motors run cooler with driver is set to less Amps? I am using Nema 23 57x57x56mm, 23HS2430B, 57BYGH056 Using DM556 Driver ZK-SMC01 stepper motor controller AC 110v to 24v Power Supply 20A Max Using on a machine that runs for hours at a time. Motors run feed screw at constant speed one direction then the other direction for 10 minutes before reversing then repeats. Driver is now set to 2.7A -1600
@johnnewman3221Ай бұрын
excellent video, can you make a video of some solution that absorbs IR light, just like this video, where you demo materials that absorb IR light
@UdayaRai-mo4urАй бұрын
Udaya 👍👍🔋🔋
@smartpowerelectronics87792 ай бұрын
Can you use a CD?
@rivandibinrahmat52212 ай бұрын
Scam video......public deception
@Woolfed2 ай бұрын
7AW03EFE3
@amirhoseinirandoost2 ай бұрын
Thank you 🙏
@Asl_Uz2 ай бұрын
Thank you it's wery easy way to understand mospec
@ark_mcmlix41812 ай бұрын
very good idea. Very good explanation 👏👏👏👍👍👍
@Ares-vh9qz2 ай бұрын
THE HEAVY IS DEAD
@jozefnovak77502 ай бұрын
Super! Thank you very much!
@tunneloflight2 ай бұрын
The infrared light is NOT wasted. IR light is essential for mitochondrial function. Blue light emitted by fluorescent and LED lamps is a carcinogen through its circadian and hormone rhythm suppression via strong activation of the IPGRC. Blue light us incredibly damaging and dangerous. LED lamps exceed safe levels for photooxidation of the retina in 2 hours 47 minutes. That is the maximum allowed exposure per day. They are NOT "safe" for periods longer than that. And that includes electronic devices. Longer exposure causes accumulative eye damage, macular degeneration and ultimately - blindness. Breast cancer rates have been rising at 4% per year since 2016. Ultimately they will rise by 75% over levels in 2015 by 2030. Prostate cancer rates will follow and rise by 130%. GI and rectal will rise by about 30%