I need help with Asrock X570 Steel legend. To enable Secure boot on eneble I first have to disable CSM, save the bios and restart to re-enter BIOS and enable Secure boot because otherwise it is not possible. The problem is that when I disable CMS and click any key on the keyboard my computer does not start. There is power everything lights up but the screen does not work black image. When I do not click anything the system finally starts. During startup there are 5 beeps. The only solution is to remove the battery, i.e. CSM is turned on again. I discovered that when I connect another monitor I can enter BIOS turn on Secure boot and everything works no beeps. Everything is ok. GPT system, AMD CPU fTPM, Secure boot enabled visible in the system everything works! But when I reconnect my main monitor the problem appears again. There are 5 beeps again and as soon as I click something I have a black screen and I cannot enter BIOS. If I do not click anything the system finally starts and Secure boot works. These 5 signals are irritating! I have previously had Secure Boot enabled on my monitor many times and never had any problems with it! I recently cleaned my computer of dust without power and battery and since then I have not been able to enable Secure Boot on my monitor again and also enter the BIOS! Is there a solution for this? Why did this problem suddenly appear? I have enabled Secure Boot on my monitor many times and never had any problems with it! I have even done what Asrock recommends Install default keys Secure Boot. I have done Custom and also the Standard recommended by users, it does nothing! When I enter the BIOS on the second monitor and switch the HDMI cable to the second monitor on a turned on computer with the BIOS visible, my screen and BIOS work but as soon as I restart there is still a problem. On another monitor everything works without a problem. The second monitor is from another computer, it has never been connected before, I have always used mine. I have done this many times on BIOS version L3 and also L5.60, now I have even installed the latest version L5.63 and there is still a problem!. I only have monitors with HDMI input! My motherboard does not have integrated graphics! I only have a dedicated card with one HDMI input and 3 Displayport inputs. I can't connect my main monitor to another output because I only have one!. HEEEELP! Asrock is shit! On Gigabyte, Asus or Gigabyte there are never such problems, this was my last motherboard from this shitty manufacturer.

this is a great video! reseating the screws on the internal components really did the trick. Thanks!

Why do I not have that AMD FTPM switch option?!?!?

I've disabled mine and now its not booting. What should i do?? I'm getting nervous I disabled it because i was about to update my bios and it says that i should disable it. :(

My exact setup, thanks for confirming this!

man, stop this terrible vocal fry while you are young. it is terrible.

I did the same hack and my insert has worked perfectly every day for over a year. Also make sure you use a good quality butane.

Those tips were so helpful, thank you!

Thank you so much! This solved the slider issue 👍

please do u have a discord i need help with the old Origin thing

This thing has been inspected and licensed by the Coast Guard? I don't think so, lol.

I did everything and windows still says my tmp is not enabled

Hey I can’t disable to flash the BIOS. Mine doesn’t have the disable option. What am I missing ?

BRO THANK YOU, NOBODY SAYS ABOUT SECURITY DEVICE SUPPORT!!!!!!

Title misled me to expect wappy cats bathing.

Looks great in 2024.

How did they even go slow enough for the Mustang??

Not all heroes wear caps

Good video. I've been having major trouble with the insert I got. It's been a frustrating mess.

Thank you man !

Thanks for this video, after watching this video all my problems were solved and my insert now lights on the first try!

didn’t work. followed all the steps properly too

I have the zippo double flame butane insert. I bled it, took the governor off and jacked up the output, bled again and again. I was sure i wasn't getting a spark. As my last attempt to get a flame i bent the wire that creates the spark basically at a right angle toward the flame ports. Bend that litte wire down more.

thank you very mush for this video, I was about to throw mine in the garbage

still get only flames that last a millisecond

wow thank you all my screws were super tight for some reason now it glides way better

Thank you it was exactly what I suspected but didn't want to make it worse. This video fixed my insert, I've had it for 6 months and it's never been reliable till now thank you!

Thanks boss because your video fix my sparkling fire problem

Legend!

Fixed my insert, thank you! Zippo really should put this on their website.

hey, I got this throttle. i initially did the "ptfe" tape mode. but it did not have much effect. as per your guide i just loosened the screws and it falls on its own now. super smooth. thanks so much. the tape is still there, don't know if it does anything or not. i am so glad i stumbled on this video! wonder if something similar could help with the rudders as well?

Thanks man! i´v had this problem far too long, i tried the remove the ring inside the lighter and turn it 180 degr, but it didn´t help much, but this was a lifesaver. Merry xmas to you :D

Thanks man, I really appreciate you taking the time to make this video 😁👍 I received a new Zippo with the double burner as a birthday gift from my oldest friend on Saturday and it just would not light properly/reliably. I have used cheap disposable butane jet-flame lighters (from Clipper, Zenga and Tor-Jet) for probably 15 years with absolutely zero issues (except for the Zippo Blu that I bought when it launched, which was just complete garbage with no positives to mention, that I sent back to Zippo for repair 3 times and the lever that opens the gas valve still broke a fourth time after just a couple of days use, so I "retired it from service"...) but my new Zippo just wouldn't run and I was dreading the conversation where I would have to tell my buddy that it just didn't work... 🥺 Watching your video reminded me how I used to have to purge air from the tank on my first ever jet-flame lighter (made by Rowenta, that I bought in Harrods in London way-back in 1991... 😳 -It used a fine wire filament like those found in lightbulbs instead of a spark to ignite the butane and aside from needing to be purged after every fill, it was an amazing lighter until some asshole stole it, and after owning that I have always loved butane jet-flame lighters after growing-up with "regular" gasoline Zippos as a kid. So, watching this reminded me to purge the tank (after 32 years of simply not needing to...) and suddenly my splendid shiny new Zippo works reliably *every time* I need it to, so huge thanks man 😊👍, and now I feel pretty stupid for not thinking to do it by myself... 🙄

You are the man it works because of you ı am glad to watched your video

ummm... why my tpm is intc? please help me out

this help me a lot OMG!!! Thank you

Thanks so much for this video! My insert arrived today. It did not work at all. After both simple fixes, it works just fine.

the grease in*** mine turned into wax

amd psp 10.0 device tpm

Turning on TPM 2.0 is okay and you can listen to that part and that’s probably why your watching this video but don’t listen when he tells you to enable secure boot it will undoubtedly give you a black screen on start up every time in the case that you didn’t read my comment be for and you listened to this imbecile that made this video find out where your CMOS battery is and follow these instructions Power off, unplug power cord, press power button for 20 seconds then remove the CMOS battery. Wait 5 minutes, then install CMOS battery back, connect power cable and power on.

👍🏼

Thank you

Omg. Worked immediately!!!!

thank you so much , my zippo is worked again after few tries to get the air out 🙌🙌

Thank you! This helped me solving the issue I had with my double torch insert!

Perfect fix , ty

Great Tip. I just got this throttle and even though I loosesned the screw as dictated in the manual, it was sticking. My throttle feels pretty smooth and responsive now.

Thanks mate! Going to try this asap!