Teach me I could pop it up in first gear when I’m standing still it’s all I got
@michaelrocha73519 ай бұрын
Brooo my flywheel was rusted out I had another engine so tried to put that engines flywheel and stator on mine but the lil pin to aim you flywheel like the crankshaft lil pin it broke off so now the flywheel is on but the crankshaft is moving but the flywheel isn’t help me out.
@jordancarder266310 ай бұрын
Do I need to drain oil before doing this?
@vicmason258 ай бұрын
Sorry bro I know I'm late. No you don't have to but may loose a lil bit so just check afterward. For me, with the bike tilted slightly I lost very lil (maybe a teaspoon)
@feero9680 Жыл бұрын
i have the same engine. is it possible to remove just the stator without removing the backplate
@KatasioBridgewater Жыл бұрын
Rad have my bike
@harris8390 Жыл бұрын
Are these clutch up wheelies??
@vicmason25 Жыл бұрын
Yea I think they were mostly or all 1st gear clutch up. I've improved so much from here. I can get it up in 3rd at this point. You ride? How are your wheelies coming?
@dbov21 Жыл бұрын
I’ve got the 2021 apollo x19. I just welded the stock muffler on where that clamp goes. I figure the muffler will outlast the bike. Just mark the muffler and the pipe so you can line it up correctly. Remove both and weld it. Install it as one piece. Takes some maneuvering but it will install as one piece without removing carb or anything else. Air cleaner removed will give more room.
@vicmason25 Жыл бұрын
Yea thats a great idea if you have the resources. It's a great bike all around. I ride other bikes too. But mines a 2017 an still starts first kick
@americanaccents2 жыл бұрын
Wheelies are impressive man! Just bought my first bike, KLX250 and have been doing helly trails and off-road some on road. Haven't tried wheelies yet but somewhat timid to. Hoping to soon tho. you killing it!!!
@vicmason25 Жыл бұрын
Thanks dude.. it is by far the most fun investment I ever made. Wheelies are awsome to work on but nothing beats riding the trails, I wouldn't kill yourself trying to wheelie, just try here an there and the skills you develop on the trails will help you immensely. Thanks for the feed back bro, I know I'm late responding, hope you're still out there rippin it
@pants61692 жыл бұрын
how many rps to get to the balance point?
@vicmason252 жыл бұрын
Depends how fast I'm going or what gear I'm in. But if your starting with first gear wheelies I would say between 5-6k and dump the clutch, but just have your foot covering the rear brake ready to tap it down
@Lito16012 жыл бұрын
👏
@dirtbikesparky85672 жыл бұрын
Is this pg county/odenton? I ride the trails of clinton, is there a spot to park down there?
@vicmason252 жыл бұрын
nah this is around old gun powder/ laurel to like beltville they run between that area. There are spots to park all around, best spots may be off switzer lane. some guys were being hot and filmed themselves parking/unloading near the wearhouses in beltville and posted it, after that (bout 2 years ago) ive heard of 5.0 pullin up tellin ppl they cant ride. but there are plenty other spots to park, i ride dual sport so i ride to the spots, but its a good amount of real estate to ride still and pleanty of places to park, majority of land is county owned or pepco i do want to get to the odenton trails too, ive talked to someone who rides back there, but not sure about the parking situation there yet
@bikersoncall2 жыл бұрын
Flywheel retaining nut torque specs?
@kevinmadrigal21832 жыл бұрын
With the 13t front sprocket is it a noticeable difference with doing wheelies?
@vicmason252 жыл бұрын
Sorry for the long delay. Definitely noticeable, lifts a lot easier with less rev, and it makes 2nd gear on technical trails better
@project5r6802 жыл бұрын
Where you get the exhaust
@vicmason252 жыл бұрын
That exhaust came with the bike.. but you can get them off ebay or amazon. Just measure your exhaust openeing where it connects to the muffler and you have a lot of options. I got one from amazon for my other pit bike, it fit fine, but had to use a worm gear to fix it to the frame
@davymetting85783 жыл бұрын
Wherebis part two
@brianchoulamany3 жыл бұрын
Where theses wheelies in 1st gear?
@vicmason252 жыл бұрын
Yes. It was my first couple weeks on this bike, so hadnt got it up in second yet. I have a video up now of second gear wheelies. You have a KLX?
@oscarcornejo89354 ай бұрын
@@vicmason25how did you do it
@lil_jac84063 жыл бұрын
How long does it take for it to deliver to your house
@pepsicanpepsi98432 жыл бұрын
about 6-15 months
@vicmason252 жыл бұрын
That answers not accurate. If u order online about 10 business days, You also can find these at some delers.. pit bike dealers pop up all over the place. I picked mine up same day i paid for it
@lil_jac84063 жыл бұрын
What's the top speed
@vicmason25 Жыл бұрын
Sorry super late bro. I'm sure you found out by now but I weigh about 185 and had it up to 48 on. Straight 55 on. Down hill
@MacAutoDiag3 жыл бұрын
Video needs to be redone
@vicmason253 жыл бұрын
I know. Sorry, I realized that. I'll try to get around to it soon. Thanks
@boy3699993 жыл бұрын
see ?
@brodywalker69053 жыл бұрын
can i get a link to the exhaust system you got cause i can’t find one anywhere
@vicmason253 жыл бұрын
I didn't get a new exhaust, 3 years later I just found a way to mount it better and it's still good. I really just put a better quality U-Bolt on it. But if you do need a new or better one just measure yours. The length of the muffler, and diameter. And the inner and outer diameter of the pipe that leads to the muffler If you need a whole system, there is an Apollo company in Canada you can Google I have ordered from before. Maybe other options here im not sure. Let me know if you still need help
@alextheking12733 жыл бұрын
So I have the same motor an the bolt to Mount the magneto flywheel on is gone like the bearing is still there but the shaft is gone how do I fix that ? An where could I get that part replacement. motor has very high compression an it’d be a shame to scrap it got the bike for free
@vicmason253 жыл бұрын
I'm sure so. Do you still need help. I could get the measurements of mine and figure it out and send a link to one. Let me know if you still need a hand
@aaronladr11833 жыл бұрын
Can I get this for free
@vicmason253 жыл бұрын
Lol. How bout this. If I get to 10k subs. And you asked first. I will give this to you free. You just pay shipping. Still runs and wheelies like a champ
@westvirginiaoutdoors65153 жыл бұрын
Is this to big for a 5 foot 14 year old
@vicmason253 жыл бұрын
Not at all. It can be lowered easily FYI but even as is you may only get 1 foot on the ground, but not too big
@danielarumugam18223 жыл бұрын
i already take off the magnet i cant take off plate screw
@vicmason253 жыл бұрын
Did u watch the second video. Or another of mine showing how to get off a screw with a impact screw driver or a chizle and hammer
@backyardblasters3 жыл бұрын
Hey man, nice wheelies. How many teeth does the normal sprocket have?
@vicmason253 жыл бұрын
He is correct and thanks for answering Moden. Altho the ratio he went with is the same as mine now (this video was stock gears) I currently run 13/42 wich is just dropping a tooth in the front instead of adding to the rear. Cheaper and easier method IMO, either way I'm sure you've figured it out by now, just wanted to respond. Sorry, family life these days, will post more soon
@cujosbikelife56873 жыл бұрын
Exactly know how to maintain 💯🗣
@evilcanevil62733 жыл бұрын
Did u take a metal ring off with a green wire when taking that apart
@tiktokmotivation21323 жыл бұрын
Why yo exuast look like the old model
@vicmason253 жыл бұрын
Cuz it was the first year it was released in America. And its second year of production. It's a 2017. But for real even at the time everyone I saw online had slight differences 🤷♂️. All got the same motor, frame, and brakes tho
You know what would be nice dude, if you would make a video on how you out the exhaust on not just how u beat the balls off your bike and broke everything
@vicmason253 жыл бұрын
My bad. I should have done that too. But It is a great lil bike, and I don't just beat it to shit, and take care of her too. The vid was just for review. Particularly an update on the bike after a few rides. Just for ppl who bought it and didn't want to be out riding and have they exhaust fall off. Next time I'll make a vid of what I did. Thanks for the feedback champ
@stephencurry18024 жыл бұрын
Bro I got mine for 100 dollars 😂😂
@vicmason253 жыл бұрын
What... how so? Hook up? Crazy steel if it runs good
@hartoranatirta27804 жыл бұрын
Nice sound and performance
@OffgridManiac4 жыл бұрын
We have a 125 BMS pit bike I change the ignition switch the coil the module the plug the plug wire and I'm still not getting no spark all I can think of is the stator needs replaced can you think of anything else that I can check
@vicmason254 жыл бұрын
Have you absolutley verified no spark? pulled the plug and cranked it? as long as your kill switch is ok then yes the stator would be the most likely culprit
@adamnava42344 жыл бұрын
Do you know what size of of that one is cuz when I looked on Amazon they have a lot of different ones
@CalDeRosia4 жыл бұрын
Power gains?
@vicmason254 жыл бұрын
of course. The original exhaust is so restricted. mainly more power in lower rpms
@AnonYmous-dp4by2 жыл бұрын
Where to find
@horseshoecrabs20004 жыл бұрын
Yellow and white wire are your lighting coil's AC output. None of those wires has anything to do with ignition keys. If you installed an ignition key, it would close a circuit between chassis ground and your ignition wire which looks like it's green with white stripe. The wire you removed was probably lime-colored, and it's a neutral indicator power source.
@raymondfranco17234 жыл бұрын
What kind of bike I have the same one you what stater do I need to get
@dirtrider60904 жыл бұрын
What is ur valve specs for the 125cc I’m working on one rn can’t find anything
@sarahkeller76324 жыл бұрын
Nice nut joke
@vicmason25 Жыл бұрын
Lol, the nut was organic. I mean the joke
@sarahkeller76324 жыл бұрын
Being a female people think I am dumb. This is my first time working on a bike. I appreciate your videos.
@vicmason258 ай бұрын
Anyone who thinks you are dumb cuz you are a female is dumber than words can explain themselves. Pay them no mind. I know it's a late response, I just post stuff when I feel like it. But just so you know ANYONE, men or women rely on the experience of others to gain knowledge. There is no difference in that aspect. I salute you and anyone who takes the time and effort to try an learn a new skill! It helps build character, keep striving for greatness
@Antilaakeri4 жыл бұрын
Do i need to drain the oil before removing the plate?
@ItsBlurred4 жыл бұрын
You can or you can just take the stator plate off and have the oil drain that way, I had to change mines 2 days ago
@Antilaakeri4 жыл бұрын
@@ItsBlurred will all of the oil come out , almost 1 liter?
@ItsBlurred4 жыл бұрын
@@Antilaakeri yeah you will drain all of the oil anyways so it really dosent matter how you do it.
@mr.wildwood73424 жыл бұрын
Thanks dude for information keep em coming I’m learning too! Really helps us KZbinrs out
@night71854 жыл бұрын
Getting an X18 in a few weeks! Can't wait!
@problemchildd1004 жыл бұрын
What's the name of that tool
@batman16174 жыл бұрын
It would be amazing if you could help me because I don't know where to buy them from
@JAS_builds4 жыл бұрын
Ebay
@didickcheeseburger4 жыл бұрын
i got one of these for $6000. the guy at the dealership told me this is the exact model ricky carmichael won the championship with. man, what a steal
@MrJoss-ud1bt4 жыл бұрын
didickcheeseburger 6,000!!!!!! The bike brand new is less then a grand!!!!!!! You were robbed!!!!!!! Hahahahah Unless this was a joke lol
@vicmason253 жыл бұрын
Lol this ol, but im sure its a joke cuz they look like the rmz color schemes. 😂 I'm sure his was a 125 2 stroke suzuki. Great bike. I dont think there is a being on the planet to pay 6k for these. They are awsome and I still have mine. Mainly ride my klx now, but I have the apollo, a older tao tao and a 69 z50 I mess with.