@@taylorhuntrr9168 there is a transmission deep stick.
@sayayindog.36963 күн бұрын
Is 2014 motor same process ? Taking off the sides of the chain
@mysterygarageCA3 күн бұрын
@@sayayindog.3696 it might be similar.
@JH-tu5pt5 күн бұрын
Bro you suppose to change them in firing pin order
@mysterygarageCA5 күн бұрын
@@JH-tu5pt not really.
@calebperkins80628 күн бұрын
Could you open the transmission to show the broken chain? I’m looking to just replace my chain…
@AllgamesAllday3659 күн бұрын
Can you tell me everything you did to this Chrysler 300 please?
@mysterygarageCA8 күн бұрын
@@AllgamesAllday365 just a 2jz swap with auto trans
@AllgamesAllday3658 күн бұрын
@@mysterygarageCA English please 😂...I'm just getting into cars I'm not versed with all the lingo yet bro
@mysterygarageCA8 күн бұрын
@@AllgamesAllday365 check out my other video, I have the full process there
@Hammersmith9549 күн бұрын
Recall 2005 to 2008 M272 motor. Balance shaft metal gets into the oil pan and oil pump. If your Vin isn't on the recall list. Call motor transportation to get you car on the list .it will take awhile to show up. But don't wait.. or it will cost you $17,000 to fix the engine.
@718stix10 күн бұрын
Niceeeee set up
@octavioavellaneda410511 күн бұрын
El GTE debe conservar los 2 turbos
@mysterygarageCA11 күн бұрын
@@octavioavellaneda4105 yo siento que jala chido con los dos turbos
@octavioavellaneda410511 күн бұрын
@@mysterygarageCA Es que los 2 turbos evitan el retraso que tienen los motores de un solo turbo, por algo el RB26 a diferencia de los otros RB, tiene 2 turbos, porque es un motor hecho para carreras... obviamente, desapruebo y rechazo aquellos que se compran un Skyline GTR y le hacen la conversión para que funcione con un solo turbo, porque no se compraron un GT, GTT o GTS?... la mayoría hace eso porque no les da el bolsillo para hacerle mantenimiento a los 2 turbos y también para que suene como el Skyline de rápido y furioso, cuando el sonido es producto de la mezcla de un 2JZ y un RB30, no de un RB26 conversionado a MonoTurbo
@denisemoya821212 күн бұрын
How did you lift the transmission up in place to put the screws back in?
@mysterygarageCA12 күн бұрын
@@denisemoya8212 with transmission jack.
@user-yr3zy6ie2v15 күн бұрын
Where you located so you could fix my transmission
@LeonardoCostaUSA16 күн бұрын
Awesome job!
@mysterygarageCA15 күн бұрын
@@LeonardoCostaUSA thank you!
@Reddirt_panda18 күн бұрын
I have a GE in pieces in my garage, lol. Its a slow working progress
@mysterygarageCA17 күн бұрын
@@Reddirt_panda GE’s are awesome
@octaviordz916018 күн бұрын
can I work for you sr? Ill make my way to your workplace if you say yes please
@mysterygarageCA17 күн бұрын
@@octaviordz9160 lol
@octaviordz916016 күн бұрын
@@mysterygarageCA ?
@andrewsunell910721 күн бұрын
The Soul Coughing loop makes this so much cooler!
@CarlosIbarra-m6e22 күн бұрын
Hey I’m interested in getting this done. Would you still be able too?
@mysterygarageCA22 күн бұрын
@@CarlosIbarra-m6e you want me to replace your engine?
@CarlosIbarra-m6e22 күн бұрын
Yes. Wanted to see how much you would charge and if you know were i can get an engine. I see a lot of places selling low mile jdm engines. Not sure if you know of a spot.
@mysterygarageCA22 күн бұрын
@@CarlosIbarra-m6e what’s wrong with yours?
@CarlosIbarra-m6e22 күн бұрын
I messaged you on Instagram. I think I found your account. I bought it used and when I removed the valve cover it was full of gunk. I started getting low oil pressure and code p0012 and cylinder 1 misfire. Cylinder compression looks good though.
@mysterygarageCA22 күн бұрын
@@CarlosIbarra-m6e ok
@Carvids_VipeR22 күн бұрын
🔥beauty
@robstevens475322 күн бұрын
Did this ever get a part 2?
@mysterygarageCA22 күн бұрын
@@robstevens4753 working on it
@razzikah748327 күн бұрын
I need someone to help a brother out what is a basic overview for what I would need to turbo a ge?? I’ve been doing research but would love to hear from someone that has done it. Should I just wait a little and just get the gte?? I’m impatient😂😂
@mysterygarageCA27 күн бұрын
@@razzikah7483 it all depends on your budget and what you want to do
@TheDrevil42628 күн бұрын
I just completed this job, he forgot about 3-4 more things you have to remove......on the back side of the intake there is a bracket screwed to the intake.These are very thin wires and they are a pain the ass to get at. So since it wasn't in the video I ripped 3 - 4 of them......The is also two more wires on the back side of the intake he didn't mention those either......not very thorough video.... BMW's suck so bad !!!! Engineered by retards... Basically that you have to bring it to them so they can charge you thousands $$$$$ Never buy a Bmw they are complete junk!!!!!
@TheDarknessOfGames29 күн бұрын
P/w has left chat
@brensbands933529 күн бұрын
More reliable and powerful with all the good looks of the Chrysler. Good job guys great swap.
@BobbyLeeSwagless29 күн бұрын
Beautiful
@marioarana3169Ай бұрын
Thank you for this video. Please do a part 3!!!
@mysterygarageCAАй бұрын
Ok
@silvernblackattachАй бұрын
Where is part 2?
@mysterygarageCAАй бұрын
I’ll do part2 soon
@onesidequeensАй бұрын
Reliability 100+ Speed 1000+
@andrewplacide9807Ай бұрын
Are you still running an auto trans. How much boost are you running.
@mysterygarageCAАй бұрын
Yes. Auto trans. I left it at 12psi.
@hookedonplatypusАй бұрын
Lmao "It's not that bad" Proceeds to keep getting more and more involved.
@mysterygarageCAАй бұрын
I was hoping for a miracle the whole time.
@hookedonplatypusАй бұрын
@@mysterygarageCA recently started trying to get my 09 G6 in running shape. Have had an oil leak forever, put some dye in... still eluding me. Think it's probably the head gasket. Not worth fixing at this point but at least I'll know. Will be trying to fix a leaking coolant surge tank as well in the next few days. I suppose this is what I get for not driving it for 8 months.
@mysterygarageCAАй бұрын
@@hookedonplatypus I think it’s worth fixing as long as you don’t have to replace the engine. This car is pretty simple to work on.
@ButchAbadАй бұрын
I don’t have power at pin 9, what could be the problem?
@ButchAbadАй бұрын
I don’t have power at pin 9, what could be the problem?
@mysterygarageCAАй бұрын
Pin 9 is power coming from the fuse box on the driver side. Open driver door and on left hand side of dash there will be a fuse box. Check fuse #5. Is a 7.5 amp fuse. If it blows again check you pressure switch on the main line behind firewall or the sensor on upper radiator hose. In front of engine.
@trackshunАй бұрын
I feel so bad for you. Fuck that man. But enjoy the bread
@michaelfromaustinАй бұрын
Fair to say it overheated
@mysterygarageCAАй бұрын
It was actually no oil pressure. It was leaking a lot of oil through the oil pressure switch.
@nickvicious13Ай бұрын
Buy American or Honda at least for fucks sake
@mysterygarageCAАй бұрын
Oh yeah…
@rojosubАй бұрын
He visto varios motores kia así😢
@roddyaubichonАй бұрын
This is a wonderful video, very comprehensive and short
@mysterygarageCAАй бұрын
Thank you!
@turhanb1Ай бұрын
Great video straight to the point no unnecessary BS absolutely awesome👍
@mysterygarageCAАй бұрын
Thank you!
@pferris3591Ай бұрын
Hi! I just wanted to drop a line and say I liked your video. You did a nice job explaining averything that you were doing and going to do. Everything was well lit, and the sound came through clearly. I have to say, at the beginning of the video where you can see the Kia on the lift and the V8 on the engine stand near it, did you ever get tempted to start measuring to see juuuuuust how difficult it'd be to fit it in? :slightly_smiling_face:
@mysterygarageCAАй бұрын
Thank you! I didn’t mesure it but next time I will.
@coreywoods1090Ай бұрын
Very good video. Good information, thank you
@BariumCobaltNitrog3nАй бұрын
Where did you get the fuse map and wiring diagram?
@mysterygarageCAАй бұрын
Fuse map anywhere online. Diagram I have software called On Demand. But you can cut a repair manual from autozone for $18.
@BariumCobaltNitrog3nАй бұрын
@@mysterygarageCA You say anywhere but I've searched a lot and haven't found my 2008 Rabbit. My owners manual is not even close to what's in the car. It looks like 16 and 5 but I guess testing all of them would be a start.
@mysterygarageCAАй бұрын
@@BariumCobaltNitrog3n I’ll check tomorrow see if I have it I can send it to you. What’s the year make model and engine?
@BariumCobaltNitrog3nАй бұрын
@@mysterygarageCA 2008 VW Rabbit 2.5 (not PZEV the other one) 4 door automatic. Thanks
@mysterygarageCAАй бұрын
@@BariumCobaltNitrog3n let me see if I can get those for you!
@harborareatech310Ай бұрын
Thats whats up!
@1mad_bugАй бұрын
Can a bad crankshaft position sensor cause rough idle ? And stalling Once i step on the aceleration pedal sounds like it misfires and it stalls
@mysterygarageCAАй бұрын
It could if it sends the wrong signal.
@michaelgonzales4813Ай бұрын
so id be replacing it with a wideband sensor rather than a narrowband right?
@mysterygarageCAАй бұрын
Make sure you get the right sensor because sometimes they use either or.
@michaelgonzales4813Ай бұрын
@@mysterygarageCA yea i bought it a denso one with the brown connector, it didn’t fit my car
@mysterygarageCAАй бұрын
@@michaelgonzales4813 it’s better to buy it from the dealer or oreillys. Just take the vIN number so they can get you the right one. Do not buy it only you will get the wrong one.
@michaelgonzales481325 күн бұрын
@@mysterygarageCA replaced the o2 sensor. codes have been gone for about a week now. today a new code popped up. P0101. familiar with that code?
@sawcysrt6347Ай бұрын
How much to replicate this setup ? (Ballpark)
@mysterygarageCAАй бұрын
Including parts?
@sawcysrt6347Ай бұрын
@@mysterygarageCA yes including parts
@mysterygarageCAАй бұрын
@@sawcysrt6347 I would have to check but a good 12 to 14k.
@jamielamie2229Ай бұрын
my beetle has over 200k miles on it, definitely need to do a drain and refill soon 😅
@mysterygarageCAАй бұрын
Yeah, it’s a good idea to keep up with the services on this cars or it can get expensive
@jamielamie2229Ай бұрын
@mysterygarageCA I'm trying to change out whatever I can. oil pan gasket is next on my list, just did the spark plugs and blower motor. I love my little car!
@mysterygarageCAАй бұрын
@@jamielamie2229 That’s good. I love this things because they fit everywhere.
@SalahMАй бұрын
How much did it cost to do the swap and what parts were needed?
@mysterygarageCAАй бұрын
I fabricated pretty much everything. You need mounts, oil pan, headers if you want and exhaust, all the accessories from a 1998-2002 camaro, computer and harness. And as of the cost, the owner paid for everything.
@xfatal_hdx251Ай бұрын
They say plug and play but no way was the 3.6l pen that i had to install in a town and country
@mysterygarageCAАй бұрын
I guess I got lucky!
@xfatal_hdx251Ай бұрын
@@mysterygarageCA Yea for sure lol good work though keep on wrenching brother
@mysterygarageCAАй бұрын
@@xfatal_hdx251 thank you!
@atonicx77Ай бұрын
omg i’m doing this then more power
@mysterygarageCAАй бұрын
Good! You should upload a video
@dmansf49ers71Ай бұрын
My Gawd what a fuckin NIGHTMARE 😩😩😩!!!! WHAT WOULD THIS EVEN COST???!!!
@mysterygarageCAАй бұрын
No. It’s actually pretty easy.
@dmansf49ers71Ай бұрын
@@mysterygarageCA ....we have different ideas of EASY , I suppose 😳
@mysterygarageCAАй бұрын
@@dmansf49ers71 I honestly thought it was difficult until I started working on it. I charge $850 to do it!
@yourdaddy5893Ай бұрын
Just did this oil light came on any recommendations why you think?