Your video was truly amazing! However, I've noticed that due to the lack of recent uploads, the channel's reach has decreased a bit. My suggestion would be to maintain a consistent upload schedule while also focusing a bit more on tags, titles, eye-catching thumbnails, and SEO. By paying attention to these aspects, your videos will have a better chance of reaching a wider audience and achieving greater success. The quality of your content is excellent, and with just a few strategies and consistency, you’ll be able to achieve even greater success. Wishing you all the best!

Thanks a lot!!❤🎉🎉🎉

Wjat if the batterie already blinks in a blue light even if i plug the battery off woth the power cable? My scooter turns on amd off from.itself or turn on and off the lights. Sometimes it doesnt work right with the power button.

I checked and all of them are fine. What to do next? It just sometimes not turn on

Is it work ebike?

Thank you, worked like a charm!

Best tutorial video ever, thanks! 🎉🎉🎉

ty man, really helped me out

After flashing now I get 35 / 27 error code.... Any ideas?

Hei if my scooter has already been hacked with a different app should i first download the orginal and then try to make faster again?

Xiaomi 2 Pro. It worked perfectly. 29 Km/h on GPS. Thank you very much for your help!🤘

nice jkob make better

And Xiaomi mi scooter 4 go?

Thanks you

Can I do it for the urben glide e cross?

My xaomi scooter makes the sound and display starts up for like 1 second before impartially turning back off so you think this will work?

does this break the scooter ?

Hello Vincent, great video. I have this model scooter. Love the accent too. Love and light from Bonnie Scotland.❤

not... the max speed is the same as original...

спасибо. Видео топ, молодец.

Same here, just resoldering a couple of the tabs in the battery fixed it. What a pile of s#%t these scooters. Poor design, flimsy, battery can’t take the vibrations. The tabs are very very flimsy. Note that I don’t think that just adding solder will work for long. The solder will be stressed. I soldered a wire with some flex in it. Kind of a U loop. I hope this will last until… something else breaks…

Works fine for me

Hello, i need some help i just did this on my scooter but i didnt really see any speed increase. My scooter somehow can reach 28km/h without any modifocation and after the firmware a didnt see any speed increase and i also didnt get the third mode. The only thing that the firmware did is increase the ecomode speed up to 28km/h and it litary removed the electric brake when didnt push a throttel button

Thanks a lot sir

I cleaned up with contact cleaner without opening working perfect 🎉

These machines seem to have so many fatal points of failure. This case shows unacceptable manufacturing quality.

pull the break, turn on the scooter, release the break and the error will be gone. Thats how I did it.

. _.) For some reason it goes over 30-35

you fixed my problem, thanks!!!

My scooter is old version 2020 and it flashed fine, but still the same speed.

where can i buy it

not working, the dashboard is blocked for speed upgrades

Can I use the software after this?? cause I have an iphone, can I do the hack on an android phone and then use my normal iphone???

Thank you so much sir got this done with a cromebook 😂👏

Такая же проблема! Где вот его найти такой новый😐

Where did you find the throttle

my scooter doesnt stop after the update but goes 27km/h tho so kind of thanks

Thanks for the video. I couldn't see an alignment problem but testing showed that it was the magnet sensor that caused the error. I pumped the brake lever several times roughly and eventually the error went away. Hopefully this works and if not I'll simply get a new lever.

Thanks so much much for mentioning the cables where inverted!!! 🙏👍👍👍 I had it plugged normally, the circuit was heating up and couldn’t understand why 😅

It works if I have the latest software update?

Dziękuję, udało się 😊

Where to buy suspension??

Man, thank you very much, I took it to the repair shop 3 times and they told me that no defect was found, so I found you and it helped me right after the first video, thank you very much

Вау!какая красота,какие высокие прыжки море чудесное!

It doesn't work

hi Thank you very much for the explanation and help dear friend. If I did everything exactly as you said and it still doesn't work, what could be the problem? Everything is exactly as you said with the zip files and it does not increase the speed. What could be my problem? This is the Pro 2 model year 2022.

Thank soo much it's just happened with me I open the betray the batry conact was broken soo I'm going to the shop to fix it

Thank you man,works perfectly

What about 4 pro 2nd gen?

this does not work anymore, only works with very old scooters that have not been updated. The only way to remove the limiter is the physically remove it from within the scooter which can be difficult if you don't know what you're doing