DONT DO IT THIS WAY, ITS INCORRECT AND COULD DAMAGE YOUR WIRING HARNESS!!!! while not as simple as most, changing the battery only requires 3 sockets, ratchet, a flat screwdriver, a torx bit and driver. remove the cowl.

Nice Job! Thanks for the video~

Be glad you don't have a 2017 escape. Unbelievable what has to be removed to replace the battery.

Thanks so much I gave you a like and a subscribe.

What is the wheel Offset and backspacing ?

I would never wear a mask like that to do that job . Your lungs will be effective. When everyone wore these during 2020 I laughed because when we're this and when u walk out of an area like this, u will find ur nose has black stuff in it. I do HVAC and never use these . This is why I know wearing a mask n95 where junk. Wow, ur brave that's probably got asbestos in that insulation . I would have it tested

Huge help bro - great instructions & great saving $$$ much appreciated

Funny story I found a Beretta Jetfire 25 in my 70's built house when we bought it.

Don't polish it. that will wreck any value it might have.

That's cellulose insulation. No fiberglass, but best not to breath it in anyway.

Neat find. I knew of a guy who found some Gold coins that were hidden during the Great Depression, in the attic insulation of an old house.

Is there a bracket I can buy that is connected to the support at the bottom connected to the frame

Thank you so much

At 5:50 I knew I screwed up

So when iput mines in they be dim but when ipress to turn them on they dont come on, they only come on when iuse the dimmer, is there a way to solve this?

What a shitty video

thanks for your video, I was just about ready to call for help or take it in for service but after watching the video I had it out and back in . Thanks

so what was the difference between spraying and brushing?

o’s o’s o’s o’reilly’s autos part

Hey great video. so with the new Yamaha petcock fuel valve installed you are actually bypassing the fuel pump by plugging the vacuum line from the carburetor?

Thank You!

Thx for the help. As much of a pain as this is, it's a lot better than the previous version of the Escape. Now THAT was a PITA. Tip: You don't have to remove both nuts on the mounting bracket. Just loosen the one on the right, and the bracket will rotate out of the way. 😉

I just bought a suzuki quadrunner 500.. i took then fuel peacock off and no fuel would even come out of the fuel tank!!

I always love a rainfall shower especially if it has a handheld too! You get a little bit more bang for your buck even if you scrap the handheld shower 😊

I was getting super frustrated with not being able to pull that battery out and not finding any screws missed. So, I watched this and finished the job in 10 minutes. Your video saved me tons of time and money. Thank you!

how did you nail up? your video never showed how you nailed and with what you nailed with. What size was the planks you used

Hi, I have a 2020 Escape Hybrid, the battery for that is in the trunk. It it a lot smaller then the normal one but just as excpensive, it has special beather tubes on it. The back still opened but the car would not go into ready mode with the bad battery. It is easy to change once you ge to it.

Thanks. Great info!

Yeah I just got White LED 194 for my ford Expedition and this really was helpful video thanks for sharing.

Love you bud huge help

Def don’t pull up this video while in front of an O’Riellys employee…. 😂😅

Did LED bulbs in my expedition and they dim down but then stay on but very faintly. Did you ever have this problem?

What size bulbs? T10

You don’t have to take the grill off for this.

I spent my last cent on the batterie, you video saved me, THANK YOU so much. Since it's another week till I get paid.

Could use a little snare like a dog catcher but obviously smaller, maybe made out of thread

So my air filter would get flooded with gas. I ended up buying a new air filter new oil filter and changed all the fluids and plugs. Then I noticed that I was getting gas in the oil. So I cleaned the carburetor put it back on had the same issue. So I bought a new carburetor put that on, did not adjust the floaters though. Then after putting the carburetor on had the same issue so this video and change this part out. I bought the OEM though for a $37. Just put fresh gas premium of course and 3 1/2 quarts of oil in there and guess what happened. Yes it appears I have gas back in the oil. I don't know what the hell. I want to take the carburetor apart and check to make sure that the floater valves are adjusted accordingly. But this is just a headache

You have to re-set the battery management system when you change out the battery on these 'smart' cars. Re-set the bms. Ignition on (no clutch if not auto, don't start the car), main beam x 5, brake peddle x 3, battery light in the dash will flash, turn off the ignition when it stops flashing. The car now knows the battery is new.

Thank you for this I was like how do you get this out I can’t believe ford for this

Thank you for the information. 🙏

5:55 it just happened to me, I was following your instructions. I had fold down the seat in the back to get the new out

Hey, hi. Great video! I was hoping you would show how you switch between overhead to the wand. Can you tell me if you can use them separately?

Appreciate the fast forward approach here. With so many videos out there over 20 minutes long, this really helped solidify the method of building shelves for me. Now, to decide if I rip down my old plaster walls and insulate and drywall.....hadn't considered that, but this is the time to do it if I will. Thanks for sharing!

👍🇨🇦

Did you seal it with any type of poly?

I stumbled across this video. I would love this on my cielings! I am in Nashville TN. Is there anyone doing this neat job around my area?

Boss status

Ridiculous to remove one part to get to the battery

How much would you charge for a room like that, but just labor? I really like it.

I can't believe that this is the exact vanity that I am having someone install and the same plumbing set up. I was concerned that the person installing the vanity would have to cut into my wall, which my husband just finished putting up new drywall and shiplap paneling at the bottom. Watching this installation really helped me to visualize what needed to be done for the install and calmed my anxiety. Thank you so much!😀