Farmboy's Garage

Пікірлер

@RustyGlovebox 3 күн бұрын

R.A is good and I like to use them as a reference when looking for part numbers. That was an interesting situation with your truck and the problem you had getting the correct parts

@farmboysgarage7595 3 күн бұрын

@@RustyGlovebox Thanks for watching! Good to hear from you!

@idaman71044 3 күн бұрын

Hey bud. To me there's too many options in the parts world for one vehicle. Since I'm at a dealer we 99.9% of the time use the vin and typically don't have any issues. But when we have to use O'Reilly or napa we always use the same person we've learned to trust over the years. I've just recently in the last year started using rockauto for some of my personal stuff. While they are usually way cheaper than O'Reilly and napa, I agree narrowing down what part you need on what trim level etc can be a little challenging. Hope y'all have been doing well. -Dennis

@farmboy30117 3 күн бұрын

Thanks Dennis. Definitely would be easier if we could look up parts based on VIN. They don’t seem to make it easy. Good to hear from you!

@mandibarnard1088 18 күн бұрын

Thanks so much for posting this. This is the exact color and model of my mother's car and the latch just broke on the drivers side, identical to this. You have helped save us some money.

@brandonmccandless4731 Ай бұрын

Thank you. Thank you. Thank you.

@wateristhefuelnotfossil Ай бұрын

Does KZbin really expect people give up in the middle of an instructional or educational video to watch the advertisement? while 99.99999% of people are only hearing their own inner voice counting… 5,4,3,2,1,skip ad!

@freeman573 Ай бұрын

Btw its NOT always that easy!!!

@freeman573 Ай бұрын

Or just bend a couple of welding rods. I've used them & they worked every time..

@Mememo-z6v 3 ай бұрын

Can you bent round pipes with that machine?

@CraigB-rw9cu 3 ай бұрын

But they do say about 12 i read it mean theres no distributor to the injectors what Google says but thought id ask you

@farmboy30117 3 ай бұрын

Code 12 means the computer is working. After it repeats 12 3 times then it shows the codes 3 times. After any code it shows code 12 3 times

@CraigB-rw9cu 3 ай бұрын

@@farmboy30117 well not really because I finally figured it out it was the electronic spark ignition box next to the throttle body the big one and I e read on line yes 12 can mean that but it can mean that it's telling me it's not getting spark or something like that to the distributor to ECM to that box but ya that's what it was lol and I tell you I've put soooooo much money in that thing it's crazy I paid 2800 for 3 years ago and I've put 2000 in it not counting gas lol over the years. But any hooooos like vice grip garage says lol lol it's fixed and it's time for something new so I wrote down everything I did to it because that's what everyone should do before saleing or trading for something else because yuns if someone doesn't it really makes it ruff for the next person so pls pls do so. Okay well seek the LORD YAHUWA while yuns still can I see 2 Timothy 3:8 playing out and I see people doing the opposite of psalms 146:3 and the gov and anyone that works for them not doing the things there not supposed to corruption is bad people follwoing Lucifer and his little minions and pay for it in the end the lake of 🔥 is real with no way out no one to save anyone that follows them and torment forever.....

@bobbyscottministriescamden3428 4 ай бұрын

Preventive maintenence is smart

@williamtaylor1412 5 ай бұрын

This video helped me immensely, too bad I didn’t find it BEFORE I changed out my ICM that’s 50 bucks I won’t get back lol but heads up if you don’t have an obd1 scanner you can still check codes by jumping the top right two terminals on the diagnostic port, turn on the key, you’ll get code 12 3 times with cel flashes 1 time followed by 2 flashes to indicate it’s in diagnostic mode, and then using this video I got 2 flashes and 2 flashes (22 - tps low volt) with tps plugged in, then jumped the two wires you said and started truck repeated and got code 21. Thanks brother!

@jarrodbroome7579 5 ай бұрын

2024. This saved me a ton of grief on my daily driver, Papaw Jim's 1994. Thanks for the shared wisdom!

@kingtitan2051 5 ай бұрын

Im getting a code 15. My voltage at the plug is 4.5 v with the key on

@samg5543 5 ай бұрын

Much appreciated. I am deciding on buying this seal. I think I will add an aluminum strip across it and under the screws to keep it all flat to the door rib with more even pressure than just the screws by themselves.

@DickiesBeerReviews 5 ай бұрын

Nice! In a 2014 Wrangler JK you don't have to remove anything to replace the front bumper fog light bulbs. No need to jack it up either. Took me 2 minutes.

@playsportfun3356 6 ай бұрын

Your really goobering up your velour work bench. Be nice to see a fella use a rag or the floor.

@saladinekinder2104 6 ай бұрын

My favorite riding lawn mower

@alshaw9420 6 ай бұрын

got a question for you sir on a 1982 chevy 4whhel drive diesel can i remove oil pan without having to remove cross member thanks

@sampletaster5093 6 ай бұрын

A valuable video. Wish Janus provided instructions. I should back charge them for not providing a complete part (missing instruction) I saw another video where they attached it to the curtain. I like yours better!

@victornaja7927 6 ай бұрын

Is this door came insulated?? Or you added your self

@jimmygarrett4648 7 ай бұрын

I’m getting a code 32 and 13 on my 1989 Silverado suburban. I’ve replaced the egr valve and the egr sensor. Still getting the code. It idles great in neutral and park, but when I put it in gear it wants to die. I’ve also replaced the MAP sensor and Idle air control valve. I’m stumped. Sound like anything you’ve ever encountered? Great video

@theflyinggracen 7 ай бұрын

what are the little bolts to hold the strip in called? where can i get em?

@v65wings45 7 ай бұрын

Looks like plenty of metal on the lower end of your pulley guard, you could drill some new holes and raise it to give your large pulley more clearance! Awesome videos brother! Exactly what I am going to do to my 60 gallon 5hp IR!

@manuelhuerta5515 7 ай бұрын

U don't need to remove the head lights just the parking lights, hold the strip w/ a clamp,use 1/4 " twist nuts instead of the pound on inserts

@jimdaug 7 ай бұрын

Just tried replacing mine with those hammer on clips. it ended up breaking the end pegs from all the hammering.

@caffeinesippingman 7 ай бұрын

Still did not get your shop lights? 🤪 Seriously, thank you for the Kia ignition switch video, ordered the part today from my local part store. Right to repair forever.

@Saintsfan1977 8 ай бұрын

About time you posted a video. Hope you are doing well.

@RustyGlovebox 8 ай бұрын

Great to see you back and out in the shop. Those LED side marker lights are much brighter. Thanks and take care