Janus International Drum Style Rollup Door Top Draft Stop Install

[@LordLactose_]

I work in the shipping dept for Janus and it's pretty cool to see videos like this using the doors we build!

[@Kgoutdoor]

Which one do I need for a 9 foot wide roll up door? There’s a huge gap up top that dirt and debris keeps blowing in and costing the inside of the garage.

[@farmboysgarage7595]

@@Kgoutdoor www.northshorecommercialdoor.com/ sells these draft stops online. You can probably ask them what you need for your particular application.

[@44twomack]

Thankyou!! i've been trying to find an example of how to install these for a month!

[@samg5543]

Much appreciated. I am deciding on buying this seal. I think I will add an aluminum strip across it and under the screws to keep it all flat to the door rib with more even pressure than just the screws by themselves.

[@AmmoVanMagnus]

Thanks you just convinced me to get the brush style. Thanks for posting this vid.

[@farmboysgarage7595]

The top draft seal seems to work fine. I’d definitely go with the brush style for sides.

[@AmmoVanMagnus]

@@farmboysgarage7595 I did go with brush style on the sides and rubber seal on top. Very glad I did. Thanks again

[@SteveRobReviews]

I like the roll up doors , much better than tracks on the inside you have to support . The top seals a lot better than the sides .

[@farmboysgarage7595]

I definitely didn't want the other style even though they look better from the outside. Seems like a lot of wasted space when they are up. Hopefully these seals will do the job!

[@sampletaster5093]

A valuable video. Wish Janus provided instructions. I should back charge them for not providing a complete part (missing instruction) I saw another video where they attached it to the curtain. I like yours better!

[@396k20]

This barn project is exciting. Really hope you start doing equipment repair/restoration videos again. I sorry about the tree falling on the shop and truck 🙁

[@farmboysgarage7595]

Thanks! I will have some repair videos to do but the restoration vids will have to wait until after the house is finished.

[@eabarberjr123]

I also used your side seal video to help me!

[@txsviking]

That works great. My doors rattle like an old Rambler in the wind.

[@farmboysgarage7595]

🤣

[@brandonjames8631]

Excellent video ! Keep ‘em coming

[@outdoorsmansgarage]

Man that's awesome I wished I had a garage like that

[@farmboysgarage7595]

Thanks bud! I wish I'd built one years ago!

[@Kgoutdoor]

With a name like that you ought to.

[@mossman381]

We need new bottom seals on our doors. Ours are completely worn out.

[@farmboysgarage7595]

Shouldn’t be too hard to do those

[@mossman381]

@@farmboysgarage7595 You wouldn't think so but we have standard type doors. They need the tension springs released to get the bottom of the door away from the track to slide in the new seal. I think I am going to try and cut a small piece of the track out and pull the door out enough to slide a new seal in.

[@boompowzap]

I see you have reflective insulation on the roll up door. What did you use to secure / adhere it to the door to keep it in place?

[@Kgoutdoor]

Would self tappers be fine and do I need washers?

[@farmboysgarage7595]

If you're talking about TEK screws, I'd recommend using washers with them. The heads tend to be too small and will eventually rip through the rubber.

[@saintb6969]

Just finishing up my shop as well, I have the same doors and have been trying to figure out how to seal that gap, where did you get that seal from? Also have you installed garage door openers on your yet. If not let me know I will show yo an easy way to mount regular garage door openers, works awesome!

[@farmboysgarage7595]

I got the seals when I ordered the doors. I ordered them with chains because I don’t plan to install openers.

[@Kgoutdoor]

How did you hold that insulation in place on the door?

[@farmboysgarage7595]

It came pre-insulated from the factory. It appears to be taped and stapled on.

[@NYTROeast]

Don't the screw going thou the curtain interfere with the curtain rolling up and sandwiching tougher

[@victornaja7927]

Is this door came insulated?? Or you added your self

[@Kgoutdoor]

Is this the one on janus website that’s 6$ a foot or $4. There are two different ones

[@lololine]

This is a great video!!! Question is that insulation on the inside of door and did door come like that or did u install after?

[@tylerleaf6730]

where did you purchase your reflective insulation ?

[@judybrownlee481]

So 3/4” screw doesn’t go all the way thru the metal?

[@farmboysgarage7595]

The door is corrugated with an inner and outer skin. If you screw them in the raised part they will not penetrate the inner wall.

[@terpencar]

How big is your building? What size doors are those? I made the mistake of putting three doors in that are only 8ft wide per door.. 8x12 in the middle and 8x8 on each side on a 30x30 building. Thanks for this video as I wondered what do do with the draft stops.. Noticed the other day I can see the ceiling from the outside if I stand real close to the door.

[@farmboysgarage7595]

Mine is a 40x40x12 and the doors are 10x10. I kinda wish now that I had just put one big door in the middle so I would've had more room on the side to put stuff.

[@terpencar]

I’m looking at redesigning the end and doing exactly that. Waiting on engineering from the steel building company to see what I need to do.

[@tedkay5272]

Do you have a link where to buy these?

[@charlespollard5740]

Thanks for the pointer as I received the same rubber draft stop as you demonstrated. How did you insulate the inside of your Janus door? What about the side draft stop installation?

[@farmboysgarage7595]

I ordered the doors insulated. It’s basically bubble wrap with a foil side. I posted the video on the side draft stop install but don’t waste your time. It’s junk.

[@chickenfoundation9323]

Did you insulate the door or did it come like that?

[@WaltsTreeVideos]

HELLO WHERE DID YOU GET THAT TYPE OF RUBBER SEAL FROM?? I NEED THE SAME THING FOR MY DOORS !! THANKS

[@farmboysgarage7595]

I ordered them with the doors but you can find them online. Do a search for top draft stop.

[@srvafool]

Jay, does that thing fold when you raise the door all the way? And, did you do the insulation on the door itself, or did the installer? I need to insulate the door and do the draft stops. Thanks!

[@farmboysgarage7595]

Alan, it's a drum style door so it rolls up on itself. The insulation was done at the factory. It's thin so it doesn't affect operation. It looks just like the foil/bubble wrap insulation they did on the top and sides of the building so it wouldn't be hard to add it to an existing door.

[@metal-wardentertainment460]

does it cause a problem when rolling up?

[@farmboysgarage7595]

No I barely notice it. Of course chain drives makes it so easy.

[@fredgupton138]

Shouldn't you put it on the outside so it doesn't roll up in your door?

[@drewlinton3472]

no, because the diameter of the drum grows as you roll the door up.

[@thetonganoxiesplit6563]

Thanks bro.