If both wire low speed n hi speed still not worked..so how..
@Mini-Driver3 сағат бұрын
That may mean your fan is burnt and not working at all. For me, I would remove the fan and bench test the motor. If you have access to a salvage yard, try to test one there (use a jump box) to compare. Thanks for watching and hope it helps.
@MikeSorrell-lp7zf4 сағат бұрын
why war make love and not watch this useless video. clueless waste of time.why would you keep these cars covered..
@Mini-Driver4 сағат бұрын
Sorry you didn't like it but I wanted to change the light assembly. It may be an accident or broken lease that would cause someone else to change theirs. Thanks for watching though and if you choose not to follow anymore, thanks for your time.
@supadupadudacud2 күн бұрын
Just did my LCAs last weekend thanks to your help, gonna do the serpentine this weekend. Thanks for the content!
@Mini-DriverКүн бұрын
Glad I could be of some assistance. Hope it all goes well. Thank you for finding me and watching.
@Serf_dumb2 күн бұрын
From the side wheel well to the headlight, are they all push pins? Also, is it necessary to adjust the aim when finished?
@Mini-Driver2 күн бұрын
Yes the lights need to be adjusted when you change the unit. It's not a hard job, but important not to blind oncoming drivers. Yes, "I think" all of the fasteners are push-pin except the 4 on the headlights>
@Serf_dumb2 күн бұрын
@@Mini-Driver ok thanks
@lukas08463 күн бұрын
"I've got my number one fan here" 🤣
@Mini-Driver3 күн бұрын
I do love a good "Dad Joke" Thanks for watching...and laughing!
@valpringault93703 күн бұрын
Hello from france. Thank you for the good video . I speak little English. Please what's a number oem pc valve. Thank 😊
@Mini-Driver3 күн бұрын
There are two different ones. You have to get one for your build date. Look on your door card and order for that Month & Year. Hope that helps & thanks for watching.
@valpringault93703 күн бұрын
@@Mini-Driver thank you for the réponse, my cooper s 12/2004.
@Mini-Driver3 күн бұрын
@@valpringault9370 From July 2004 forward, you will need: Mini Crankcase Vent Valve - Genuine Mini 11127577568
@valpringault93703 күн бұрын
@@Mini-Driver thousand thanks 👍 🙏
@vandalest6 күн бұрын
Thanks for the idea! Here is maybe a safer and simpler idea to test the same concept you had. In the fuse box, there are two relays for the Fan State 1 and Fan State 2. By removing the relay and using the empty relay socket itself to turn on the fan with thick enough wire / piece of metal. This would be much less hasle and safer as you still keep the 50A fuse in line. Also if you have some cable tools available, one can create a cable with same clip size as the replay and simply slot a cable in place of the relay. And there is a safety, that you have to turn your one click to make the fan go (bypassing the main relay), so there is less risk of shorting while moving the live wires. By your method, there is no fuse and when accidentally shorting the battery, there is potential for 250~350A, basically creating a welding machine and the battery will heat up very fast, creating the next risk for fire. So be careful!
@Mini-Driver5 күн бұрын
I get that and thanks for the information. With my method, you can also test an assembly out of the car, as in a salvage yard. There are risks involved, so test at your own risk. For the low speed, you can also turn on the A/C and that supposed to start the low speed fan as well. Thanks for watching.
@luckyyang96226 күн бұрын
19:21 pro tip!
@Mini-Driver6 күн бұрын
Thank you. Our speed sensors come out easily, but others have to really work at it. Just take your time and use lubricant if you have to. Thanks for watching.
@samosity1237 күн бұрын
Great video. I bought the same headlight assemblies for my 2012 Forester and should have realized that the bumper needed to come off. Looks like a 1.5 hour job.
@Mini-Driver7 күн бұрын
Doing a video makes the job take longer, but I'd say it would only take an hour with proper tools. Thanks for watching and good luck with yours.
@cesarpizarro8128 күн бұрын
Nice job and thank you for including the torque specs.
@Mini-Driver7 күн бұрын
I do include the torque specs but I always say to independently check them yourself for your specific year & model. Sometimes that's why I don't give part numbers. Thanks for watching.
@leonardthyme8 күн бұрын
After I polish my headlights I immediately apply Meguiar's G17804 Keep Clear Headlight Coating (not a sponsor) and it keeps the headlights looking great and slows down the oxidation that turns the lenses back yellow.
@Mini-Driver8 күн бұрын
I'll have to get some of that coating and use it. Thanks for the recommendation. I will do this about once every year or so. Thank you for watching.
@brianasamuels9 күн бұрын
We have a lot in common! I have an 06 sprinter 3500, 06 mini cooper convertible, 2013 Subaru outback limited 2.5 and eight other trucks and cars trucks plus tractors, forklift, skid steer, trailers and more stuff that I found or bought as junk and turn to gold. My most recent find is the Subaru. 190k miles no rust runs great but needs control arm and brakes for $1500! Thanks for the effort you put into these videos!
@Mini-Driver8 күн бұрын
Wow! You have a lot of the stuff I'd like to have. I'm picking up our daughters riding mower to turn into a yard mule for use with my bees. I really meed more land too. Thanks for watching.
@brianasamuels9 күн бұрын
Thanks for the great effort! My wife and I just bought a Pepper White 06 convertible cooper S with 50k miles. A beautiful and fun Summer ride for her! I am going through it changing fluids belts and hoses to set a baseline of care.
@Mini-Driver8 күн бұрын
They are fun cars to tool around in when the weather cooperates. Sounds like you are off to a great start doing those things, then enjoy!
@timmccrary224310 күн бұрын
You can also just turn your A/C on. In the MINI, that turns your low speed fan on.
@Mini-Driver8 күн бұрын
I have to try that way too. That may also save someone some time diagnosing their issue. Thanks for sharing that and watching.
@vmfan9610 күн бұрын
Thanks for taking the time to show what you went through. 258K miles is pretty good for the Forester. Nice property you have there.
@Mini-Driver8 күн бұрын
Thank you for watching and I hope it helped. We just drove it to Louisiana so we added another 2500 miles to that total. Thanks for the comment about the property, I appreciate what we have, but I would love to have more space and a garage. . . one day.
@davestan52312 күн бұрын
Great video. Right front clunking noise on my daughter’s Forester. Betting the bushings are bad. Love the idea of two sets of ramps. Perfect set up also to do CVT drain & fill.
@Mini-Driver8 күн бұрын
Yes, having two sets of ramps is great, I do need another set of the plastic ones. My metal ramps are not safe anymore so I tossed them. I've never done a CVT drain & fill myself. Maybe one day. Thanks for watching.
@davestan5236 күн бұрын
@@Mini-Driver Moog parts on on the way for my Subbie. How are the MOOG parts holding up for you? I got control arm bushing too. I live in the rust belt of western pa. 🤦🏻♂️ Thanks in advance my friend.
@Mini-Driver5 күн бұрын
@@davestan523 So far our parts are holding up fine. I, fortunately, do not live in the rust belt but I watch South Main Auto and he uses some sort of spray to coat new metal under the cars & trucks he fixes. I would do all I can seeing some of those vehicles. Thanks for watching.
@billsmith674513 күн бұрын
Love the music at the end bro!
@Mini-Driver8 күн бұрын
I put that like they do at the awards shows when the speeches get too long. The music means it's time for me to "wrap it up" lol. Thanks for watching.
@nancynahlik380814 күн бұрын
My 2015 mini convertible requires I push the open button several times to get the sunroof open. It opens an inch stops pull button opens an inch etc. Opens smoothly when top goes down. Any ideas on problem? Seems like a setting somewhere that was changed ?? Idk. Thanks
@Mini-Driver14 күн бұрын
That's a new one for me. What is your battery voltage? Maybe look into getting a new, (used from a salvage yard) motor for the sunroof portion. The smooth opening is separate from the sunroof. There is hydraulics for the top opening operation. Hope that helps. Thanks for watching
@metaframe2k15 күн бұрын
I always put the removed wheel under the car the same way, and my grandfather did the same. Here we can say that this rule was written in someone’s blood and must be followed.
@Mini-Driver14 күн бұрын
Yup, always be safe! I've seen people just using a jack. Not me. Thanks for watching.
@heidiwulf448515 күн бұрын
Hi Jimmy! You are the best! I want to get my car to you and you can do a video!
@Mini-Driver15 күн бұрын
We will get together to see what we can work out. We have to get you back on the road having fun.
@williamkrusejr184615 күн бұрын
Thanks for the video i did not know how to clean the drains . I am going to now that i see how it is done.
@Mini-Driver15 күн бұрын
You can also test them by pouring a little water in the OUTSIDE tracks of each side and looking behind the front wheels for water. The back you will see with the hatch open. Thanks for watching, glad to help.
@jkk24415 күн бұрын
Thanks for the video. My ‘02 Cooper S does not need this done (yet!) but I know I can use this video when it comes time. You have a very beautiful granddaughter and I’m sure she will appreciate all the work you’re doing saving this car for her.
@Mini-Driver15 күн бұрын
Thanks very much. I did go back to get the alignment done again. It took the tech two tries to get it perfect. Thanks for watching.
@I_Am_Squirrel68519 күн бұрын
Thanks for this, dealer wanted 2k for parts and labor.
@Mini-Driver19 күн бұрын
I'm glad I was able to help you a bit. The dealerships have their place too, but I try not to visit them too often. Thanks for watching.
@heidiwulf448519 күн бұрын
Amen to the bad hand response. Turn lemons into lemonade! I made a remark on one of your other videos. I have a 2006 Mini S convertible. It is my fun car, but it has become less fun. I don't know that I can afford to keep, It is having many issues.
@Mini-Driver19 күн бұрын
Sounds like you have a number of issues with your MINI. What can I do to help?
@heidiwulf448519 күн бұрын
Jimmy I am from Stauton VA I see you are from central va. I truly need you
@Mini-Driver19 күн бұрын
I went up to Reston to help a viewer with his convertible. How can I help you with your MINI? Let's see if we can make driving it fun again. I sent you a FB message.
@heidiwulf448519 күн бұрын
I am a fan Jimmy. I just wish you could personally help me. My mini 2006s convertible is killing my pocketbook. My full-time car is a Subaru outback naturally no problems.
@Mini-Driver19 күн бұрын
Our other car is a Forester. What's going on with your MINI?
@stephensomersify21 күн бұрын
really clear - and concise - old git, UK
@Mini-Driver21 күн бұрын
Glad it helped. Thanks for watching.
@JasonLingerfelt22 күн бұрын
Thanks for the video my fan only works with the ac on it doesn't auto come on at two hundred degrees.
@Mini-Driver22 күн бұрын
With the A/c, the high speed fan is usually on. The low speed should come on at a lower temperature than 200°F. It may be a temp switch or something with the thermostat, hard to say without more info. Thanks for watching.
@jondeegan941023 күн бұрын
Thanks for sharing this 😁
@Mini-Driver23 күн бұрын
You are welcome, hope it helped you. Thank you for watching and commenting.
@evs276023 күн бұрын
The lady just picked up an '06 R52 and lost the rear window this morning. Brilliant video! KZbin University wins again! Thanks for the content, already subscribed since it seems like I'll be on the same maintenance path. Cheers!
@Mini-Driver23 күн бұрын
That is so awesome, my video helped you. Be prepared to do the other side too as they have the same duty cycle. (Both rear windows operate together, unlike driver/passenger) Thanks for subscribing, I will be doing all kinds of general maintenance and repairs.
@kazerZose25 күн бұрын
thank´s man , great tutorial and explanation so easy whit your tips
@Mini-Driver23 күн бұрын
I'm glad it helped. After the first one, it is an easy, money-saving repair. Thanks for watching.
@OntiverosF25 күн бұрын
i ended up ordering a motor for the top from the UK on ebay, it has a metal gear instead of the plastic one- my R52 needs some work.
@Mini-Driver23 күн бұрын
Ours still needs more work too, but I will get to it in time. I'm having alignment issues I think. One thing at a time. Thanks for watching.
@leybimercado801327 күн бұрын
Excellent tutorial.. hello from Bronx NY. Thank you
@Mini-Driver27 күн бұрын
You are welcome. I'm originally from Queens, but that was a long time ago.
@on4acres28 күн бұрын
Thanks for the video, did this fix the rough idle? My outback has been idling rough and seems like it’s about to stall sometimes. I did the pcv, cleaned the MAF and I plan to do this next. Thanks!
@Mini-Driver27 күн бұрын
It did fix our rough idle and made the car run smoother. That could be me just wanting to feel that, but Sharon said she felt it smoother too. It may be the combo of all the things combined though. Sounds like you're on the right track. Thanks for watching.
@barbputnam717229 күн бұрын
Great video Jimmy!
@Mini-Driver29 күн бұрын
Thank you, we still have more issues, but little by little i will get it done. Thanks for watching.
@barbputnam717229 күн бұрын
I just gave my daughter my 2013 convertible roadster and I did window weld w the v primer but I need to get hers new top. The mini dealer says it costs $7k and I think I can do it myself 😀
@barbputnam717229 күн бұрын
I love watching these videos because I save money so I really appreciate you taking the time to share!
@Mini-Driver28 күн бұрын
@@barbputnam7172 I am glad I am able to help. I do them because it saves me money too as well as helps others. Thank you for watching, I appreciate you.
@Mini-Driver28 күн бұрын
@@barbputnam7172 I never priced a new top but $7K is a lot. I would be changing it myself as well, if I ever need one.
@LFA177629 күн бұрын
Question..You ever have a misfire on the suberu? I have a 2011 forester with that going on now
@Mini-Driver29 күн бұрын
Knock-on-Wood, No we have never had that. Yes on one or two of our MINI's but, not the Subaru. I would start with checking wires, plugs and coils. Hope that helps, thanks for watching.
@williamkrusejr1846Ай бұрын
Well sir i was able to test my mini cooper fans i did just as you showed and they both work i wasn't sure they would i'm glad they do thanks again
@Mini-DriverАй бұрын
That's good news, glad I could help. Thanks for watching.
@OntiverosFАй бұрын
Tried your method and for a quick second the low speed worked, tried the high speed and nothing. went back to low speed and now it won’t kick on- think my fan is shot.
@Mini-DriverАй бұрын
Check your fuses also. If your high & low speed isn't working, it just might be your fan. If you take it out, I would test it a few times out of the car just to be sure. Hope that helps. Thanks for watching.
@OntiverosFАй бұрын
Thanks for the reply, shouldn’t my high speed fan work by giving it direct 12v from the battery?- now i know by watching your video that the resistor is definitely shot for the low speed.
@Mini-DriverАй бұрын
Yes, the high should work. If you can find a fan only instead of replacing the whole unit, it would be less expensive. A salvage yard might be your best friend.
@williamkrusejr1846Ай бұрын
Thank you so much i have been wanting to check my fans i'm not sure they work. Now i know how to check i'm going to see tomorrow.
@Mini-DriverАй бұрын
You are welcome. It is a common failure at the age of these cars. Not too difficult to fix and there are a few different ways people do the repair. Good luck and thanks for watching.
@Brandon-tz6vzАй бұрын
Thank you!
@Mini-DriverАй бұрын
You are welcome. I may have to do the same on our van too. I hit a deer a few years ago and now I get moisture in one of the headlights. Stay tuned & thanks for watching.
@jkk244Ай бұрын
That new Countryman is MASSIVE! How can that be called a MINI? I’m the original owner of a ‘02 Cooper S (it just turned 22 years old this month) and I hate how the MINI has grown bigger and bigger with each new model. You’ve got a great channel, and you’ve helped me with working on my car. And I appreciate your love for these cars. Thanks!
@Mini-DriverАй бұрын
Thank you for those kind words. I do like the first gen MINI's. These new ones are huge, but I guess it gets small families into the MINI brand. I'll try to keep my older ones as long as I can. Thanks for watching.
@douglastran1499Ай бұрын
What would you do if the sway bar link nut won't come off and just spins with the threaded bolt?
@Mini-DriverАй бұрын
I would have to see which nut & bolt exactly, but I would probably cut it off and replace it. I might even got to a salvage yard to see what can be salvaged & used. If there is a way you can post a picture, that would be helpful. Hope that helps & thanks for watching.
@kylegroenewald4443Ай бұрын
Hey Jimmy I got the same one same colour as well all the way from south africa
@Mini-DriverАй бұрын
That's cool! I've seen some very picturesque drives, on line, in South Africa, and I bet they are even better with the top down. We enjoy this car when the top works properly. I'll get it back together sooner-or-later. Thank you for watching.
Ай бұрын
Doesn't it need any programming afterwards? Just clean? Thank you
@Mini-DriverАй бұрын
No, I didn't program anything after, just the cleaning and reinstallation. Thanks for watching.
@otcustoms5339Ай бұрын
Great video man. Thank you
@Mini-DriverАй бұрын
You are welcome, hope it helps/helped you. Thank you for checking out the channel.
@oscarmtz6513Ай бұрын
Buenas tardes espero este muy bien, te escribo de Monterrey,Mexico, edpero me puedas ayudar y traducir este mensaje, tengo un mini s 2008, ymi carro tiene una faya que no le han podido detectar, al rececorrer unos 10 km ,empieza a enceder el testigo del aceite , ya fambie bomba de aceite, bulbo de aceite ,metales , cadena del tiempo,bomda de agua las 2 junto con la auxiliar, enfriador de aceite, empaques de porta filtro de aceite y la falla sigue, siento que el carro se calienta , si me puedes ayudar muy agradecido, saludos 👍
@Mini-DriverАй бұрын
Inside the oil cooler there is a switch; under the filter. That may be your issue, as they are prone to break. Also if your filter is not inserted completely. Other than that, it would be hard to determine without more information or being there. Hope that helps.
Thanks again. I hope my videos help others who like doing repairs themselves. I try to be thorough with good angles.
@parisshanegreer6837Ай бұрын
@@Mini-Driver The little details you put in the vid are great. I am going to replace that drive shaft on my car, and your vid helped alot.
@Mini-DriverАй бұрын
@@parisshanegreer6837 I thank you. Just make sure you really need a drive shaft. The u-joints can get stiff and cause vibrations. Good luck with your project.
@parisshanegreer6837Ай бұрын
@@Mini-Driver Thank you as well
@parisshanegreer6837Ай бұрын
Good stuff. Gotta get a night buddy.
@Mini-DriverАй бұрын
Thank you This is an easy repair/replacement. Thanks for watching.
@barbputnam7172Ай бұрын
You bet and I am subscribed so I will catch up on your other videos too!!! Have a great night!!!
@Mini-DriverАй бұрын
Thank you so much. I have so many projects I am putting off, but I have to get going, so stay tuned.
@barbputnam7172Ай бұрын
Hi Jimmy! So glad I found your sight because it’s so helpful!
@Mini-DriverАй бұрын
Thank you, that is my aim to help people and show a bit of a different perspective. No big shop, manual tools, no lift, etc. Thanks for watching.