Hi how to fix E2 error in oster cooker.?

Well you defeat the edge guard acting as a splinter guard, and you may get some deflection in the track. I’m not all that hip on this idea.

Hi. Very clever nice job. Thanks

Where the or what we go to buy rice spare

Good morning 🌅, I think that this is one of the best site saws on the market, I purchased mine brand new in 😂,WAIT FOR IT 2004 😮😂 , it as work done thousands of hours of work, and I purchased the fold up trestle for it as well that’s on wheels, I retired a couple of years ago are now living in France, originally from the UK, and is one thing that I am planning on doing hopefully in the next week or so, I’m going to try and strip the gearbox down and repack it with Grease As the key box makes a bit of a wearing noise, I purchased the makita large dust collector kit at the same time that still works, and Makita drill with hammer, this has been rebuilt 2 twice, the first time is that I dropped it, From a great height, it’s the one with the metal gearbox metal frame, Last time I had it repaired, I had a new motor put in it, and they done it free of charge, because I have been a good customer, now I am having fun 🤩 with my old tools, from France. 2024 .

Nice video,thank you

Great video. Concise and to the point. One criticism: the background music is too loud.

Worked for me. Thank you

Oh, now that is clever. The size of the wood panel to be cut is only limited by the length of the track and the parallel fence ist at the beginning and not the end of the whole jig. Very clever indeed. And with the Festool saw the blade is at the very edge of the bottom plate and there is no space for a aluminium profile so it is a lot better to use the track for that.

Hello, what about getting a small/cheap aliexpress bms board that fits and solder it to the battery contacts and connect it to the incoming current. No need to have this external charger everytime. Or what a about a set up with resistors connected to the incoming current, you only need like 4 volts Regards

Whats easy about this,?????🙄

No way will I pay for or do that shit to get a crap makita to work. Makita is garbage

What is the name of wire connector? I don't have a solder iron

In Which store I can get this fuse in USA?

Is that puse always need to replace?

This was s copied from another guys video. The first battery you opened has the more advanced BCU board and the load balancers are already connected to the yellow port. No need to open and solder on. Also some BCU have a chip onboard that will lock out the charging capabillity so a new board is necessary. Chio is Renesas NEC and encrypted dump.

Tried to download plans for this and paypal wont work

This is what I am looking for Thank You for sharing

You know they make miter saws for stuff like this!!!

Jump start your drill batteries

I won't be buying Makita stuff anymore. They have become a total rip off

Works great if you pay attention to instructions. kzbin.infoUgkxviiltW7NlHbp_VL_bLbIkbLAvILVhnia For those that complain about "mushy" or "wet" rice I suspect they are using the included cup to measure rice (which is really only 3/4 cup) and then putting in water using a separate measuring cup that is a full cup. This results in too much water and you will get mushy or wet rice and think it is not done. Just use the included cup for both rice and water, or your own measuring cup for rice and water according to your package directions. It will come out fine. I've used mine for years for brown and white rice. If your machine is bubbling white froth out of the steam vent then it means you should have rinsed your brand of rice first to remove some of the starch. Sheesh. Makes me wonder how people can cook well enough to feed themselves.

Excelente producto

You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice kzbin.infoUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.

I need ur contect pls

How do get u

I think I’ll but a new battery 😢

can you run dado on it

Thanks. I have use your instructions.

My rice cooker turns on but it switches off too early and the rice is still soaking wet is this maybe a failing resettable fuse? or a different issue?

At that point just buy a new one

Is 18V Makita charger can charge an 8 or 12 ohms battery?

Friend - Congratulations on the video - My MAKITA DC18RA charger burst components and I don't know the code to buy - They are the IC PWM with 4 pins on one side and 3 pins on the other position IC-1 - And the other one is likely a transistor in position IC -4 which is close to the (smaller) TR2 transformer -------- IT WILL HELP A LOT TO KNOW THE CODES OF THESE TWO COMPONENTS SO THAT I CAN REPAIR THE CHARGER - I appreciate your attention - Thank you

My husband used these plans from Woodglut and he is very pleased.

Very helpful tutorial. Thank you for sharing. At 2:50 you test the fuse. How is it done? setting on the meter and what the reading should be if fuse is good? Thank you again!

Mine turns on but refuses to go into cooking mode.

Screw this

the good thing with these being cheaply made, is that they are very similar in construction and have similar weak points. Danke man!

Nice work but i think i just buy a new one :)

I just fixed mine, thank you so much for the guide!

На дорогой инструмент деньги есть, а на торцовку нет. 😅

Durante mucho tiempo, no podia conectar algunos equipos por bluetooth. hasta que leí el manual... hay que emparejarlo desde el control remoto y mantener apretada la tecla de bluetooth, hasta que aparezca "pairing" y ahi empieza a buscar. Se puede conectar "todo", notebook, tablets, moviles de distinta calidad, etc. asi que solo es paciencia. Solo admite un emparejamiento por vez, para emparejar algo, hay que desemparejar el anterior.

Great video ,I’ve taken away the riving lade off is this ok ?

Top

Just came across this - My friend you have solved my problem with this - also how to make a very easy rail-square!

Aha !

Any ideas why my charger stays solid green but my battery is flat and it doesn't charge??

What if i conected direct without fuse

Didn’t solve how to continue using the charger?

thank you so much i ordered new fuse, i think i have same problem so will update when i switch out the fuse.