Still trying to figure out why my green board just reboots when reading the drive
@NewYork679210 күн бұрын
"Completely fucked." -inspectah, 2020
@overnightdelivery19 күн бұрын
That is so awful. It's almost like you have to make a Sega CD Pickup Only to avoid damage in shipping. These things don't even like going upside down, let alone being bounced around for miles.
@overnightdelivery21 күн бұрын
Those SMD Caps looked immaculate
@tomteiter7192Ай бұрын
ooo wow, would be cool to reverse engineer the adapter and game boards. The base is a standard Amiga 500. The Kickstart ROM on this thing would be interesting. Can you dump it and put it somewhere? Edit: nope, never mind, it's a normal Kickstart ROM (freakyly V1.3 in such an old machine), BUT it seems to be disabled. I can't quite see whether the wire only goes to pin 12 (/OE) , or whether it is bridged to pin 11, which is GND...
@inspectahtechАй бұрын
@tomteiter7192 unfortunately I sold the unit to RMC on KZbin
@tomteiter7192Ай бұрын
@@inspectahtech no problem, it's in good hands there :)
@jujucheche9735Ай бұрын
hello , nice video . I think i have the same problem but with a neo geo cd front loader, it is the exact same drive. Can you , please , explain me how did you managed to take the tray appart ? I wish i could access those gears under it but i don't understand how to do it without destroying it .
@jujucheche9735Ай бұрын
ok got it ... hahah . But it is still not fixed. I am where you realize you have 2 broken pieces of plastic. I had the same issue but only one side was broken . But i will watch the rest very seriously , i think your video will be ( finaly ) my solution .This is so hard to find info about neo geo cd1. Until i realize it is the same drive as a mega cd...
@SuperMDGOLD9 күн бұрын
You can find a tutorial online?
@thegametrogАй бұрын
You are the Golden Tee master, how many do you have!
@inspectahtechАй бұрын
@@thegametrog omg sir....too many!! 🤣🤣
@foundunconscious2Ай бұрын
Nice fix! Mostly paying for the convenience of 'plug and play'. There is also a custom wiring harness to fit your model of pinball machine. I'm surprised Stern doesn't offer these in their premiums for an extra $250.
@LuisScharfАй бұрын
Does it work now?
@inspectahtechАй бұрын
Did you watch the entire video?
@LuisScharfАй бұрын
@@inspectahtech I saw him fixing something - but I didn't see him testing it at the end.
@LuisScharfАй бұрын
@@inspectahtech sorry by him I mean you. Now I'm looking at your other vids. Why the golf hardware in specific?
@inspectahtechАй бұрын
@LuisScharf I show the boot up and the game running, yes it works ... I've just had a bunch of clients send Me a ton of boards recently
@PaulDriverPlusАй бұрын
No idea what you were working on until the end, LOL! All hail the algorithm. Nice trouble shooting, good work.
@steveridden9772Ай бұрын
Do you happen to know where to get good , better , replacement video cards . Mine has gone bad
@inspectahtechАй бұрын
@@steveridden9772 unfortunately not they're expensive and all used
@steveridden9772Ай бұрын
@@inspectahtech is there any way to repair them
@inspectahtechАй бұрын
@steveridden9772 depending on what's wrong yes...not all are unfortunately
@TIMOTHYH-r9jАй бұрын
Hi . I have 2 gt fore 2005 green boards one is working but I cannot change the clubs /enter my initials/ change courses. The other one I just bought off of eBay and one of the green lights is steady green and won’t boot . It just says no display.I was wondering if I could send you the boards to fix.
@inspectahtechАй бұрын
@@TIMOTHYH-r9j absolutely!!
@TIMOTHYH-r9jАй бұрын
Can you send me an address to send them out?
@inspectahtechАй бұрын
@@TIMOTHYH-r9j you can message me on Facebook @ Inspectah Techs Retro Repair
@TIMOTHYH-r9jАй бұрын
Awesome thank you
@joshuastill2619Ай бұрын
Why is it highly sought after?
@scpnoobersАй бұрын
It doesn’t waste 2 seconds of your life when it starts up to show you “licensed by sega”
@joshuastill2619Ай бұрын
@@scpnoobers that’s gotta be the first time I asked a question on KZbin and someone actually replied.
@scpnoobersАй бұрын
@@joshuastill2619 after 4 years?
@HammysHangoutАй бұрын
I just had a customer bring me a Golder Tee 2005 board using the same CF Card.. DEAD card.. i had to replace it. Seams the creator of these kits used sub par cf cards.
@inspectahtechАй бұрын
@HammysHangout I use multiple drives for my repairs in these cases it's not the drives
@HammysHangoutАй бұрын
@@inspectahtech I do as well, I am just saying the SAME card you showed as "dead" , was also dead for me.. just saying, came "creator"
@inspectahtechАй бұрын
@HammysHangout ohhh sorry yes! I thought this was from one of my newer GT repair videos, yes these cards are horrible, I apologize
@HammysHangoutАй бұрын
@@inspectahtech I tore the card apart i have, counterfeit SanDisk, so most likely just crap.
@DaveRepairsАй бұрын
nice to record the results - well done. Looks like a 3DFX PCI card, which is worth something.. Golden Tee no so desirable here in the UK and go for low amounts.
@inspectahtechАй бұрын
@DaveRepairs absolutely a 3dfx card! I have a few Two need repair,which I might make a video about
@DaveRepairsАй бұрын
@@inspectahtech someone on youtube was doing 3dfx repairs.. there some DOS software that helps
@inspectahtechАй бұрын
@@DaveRepairs thank you! I'll have to check that out
@DaveRepairsАй бұрын
@@inspectahtech 'Mail-in repair: Voodoo 2 with 12MB @ 110MHz memory' -- check that out
@brendanvogele2531Ай бұрын
Love these videos! Would you be willing sometime to show us some tips and tricks to SMD soldering and desoldering?
@inspectahtechАй бұрын
@brendanvogele2531 absolutely! I may need to dedicate a video for that
@WILDGEESE399Ай бұрын
I see alot of these boards now coming up on ebay non working well done ,in the end if you keep messing with this system there wont much that you dont know ,i wonder why that chip gets corrupted 👍
@inspectahtechАй бұрын
@WILDGEESE399 that's a good question!! Something I'm still trying to figure out!
@da69one23Ай бұрын
Damn good job on this one man. Learning every day!
@inspectahtechАй бұрын
@@da69one23 thank you! I really appreciate the support
@nunyabusiness69Ай бұрын
This is such an awesome find! You really are now the expert on fixing these
@inspectahtechАй бұрын
@nunyabusiness69 thank you!! I'm still learning a ton as I go
@Wolfstanus2 ай бұрын
How does one get in contact with you for repairs?
@inspectahtech2 ай бұрын
@@Wolfstanus om fb @ Inspectah Techs Retro Repair
@Wolfstanus2 ай бұрын
@@inspectahtech contacted.
@jamieteixeira40762 ай бұрын
What metallic spray do you use for the 16 bit finish on the model 1?
@inspectahtech2 ай бұрын
@@jamieteixeira4076 I didn't you any metallic spray
@pugamapish2 ай бұрын
Miles "Tails" Prower from the crypt
@inspectahtech2 ай бұрын
I'm dead! 💀💀
@geeked58832 ай бұрын
MINOR SPELLING MISTAKE DETECTED!!!
@inspectahtech2 ай бұрын
Lmfao!!! Good catch, corrected!
@nunyabusiness692 ай бұрын
Cool video! New to this- what is the beeping device you use? And what does it do/tell you
@inspectahtechАй бұрын
It's a logic probe, in short it tells you the state of logic HI,Low whether it's working or not
@foundunconscious22 ай бұрын
Great work! Highly reccomend Aaron for everything board related and beyond.
@nunyabusiness692 ай бұрын
Its always funny how sometimes its the simple things. How often would it be that chip to go bad lol
@inspectahtech2 ай бұрын
@@nunyabusiness69 I have never seen that chip go bad! It's a first for me
@Bob_Johnson_7772 ай бұрын
I have a few boards that need repair. Not quite 12 but, Enough. How do I going about having you do this to my stack of boards? Bob
@inspectahtech2 ай бұрын
@gasmasteries you can message me on Facebook @ Inspectah Techs Retro Repair
@da69one232 ай бұрын
Man I just finished your last video like 30 mins ago and was disappointed there wasn’t another one. And here it is!
@inspectahtech2 ай бұрын
@da69one23 there should be more coming as well! I also have other Golden Tee videos in my channel
@inspectahtech2 ай бұрын
@@da69one23 I'm glad you're enjoying them!
@JeeFLaV_Qc2 ай бұрын
lol that genesis was recaped already xD those arent the OEM capacitors.
@inspectahtech2 ай бұрын
@JeeFLaV_Qc it wasn't Recapped
@AnthonyNorman-d2x2 ай бұрын
Did the game boot up at all? I am working on a green board and it’s booting up just giving me a scrambled screen.
@inspectahtechАй бұрын
Would you like to send it for repair?
@raykirschner54082 ай бұрын
Can we please get a 3d model of these hinge pieces that break all the time! PLEASE!! I would love to create this piece
@ScottMcVittie-p5c2 ай бұрын
My Technics SA-AX920 receiver emitted a very POP from each speaker cabinets and immediately shut off. Once cooled the unit returned to serviceability until again "POP" and unit shut down. Talking with some engineer friends they tell me the outboard cooling fan has stopped working causing the output transistor boards to over-heat and hence the loud "POP" sound and immediate shut-down. I really like the sound of this amplifier driving two Kierksaeter X-79 floor standing speakers I watch being built at their plant in Germany. I would appreciate recommendations for repair to serviceability of the Technics.
@inspectahtech2 ай бұрын
@ScottMcVittie-p5c when playing music do you see the fan moving?
@ChattanoogaLife2 ай бұрын
what tool are yo using that is making all those different beeps? I assume each beep means something different
@xmodsgaming2 ай бұрын
No comments wow
@mohiria3 ай бұрын
Could you show us how did you open the remote?…
@j-z753 ай бұрын
Would have been nice to show how you removed the cover 😂
@inspectahtech3 ай бұрын
There's tabs holding it together, you have to pry it apart,you can use a dull driver like flathead or a thick guitar pick
@j-z753 ай бұрын
@@inspectahtechI got in with a little more force. Cleaned up the leads and working again. Thanks
@inspectahtech3 ай бұрын
@j-z75 you're welcome! Glad you got it working again
@Brandon12133 ай бұрын
Question... did you ever get the right laser ?
@inspectahtech3 ай бұрын
@@Brandon1213 so I'm still searching for the proper laser for it
@Brandon12133 ай бұрын
@inspectahtech I know where to get the correct one I just got mine in today and am doing a cdx this weekend
@inspectahtech3 ай бұрын
@@Brandon1213 I'd love to know I have two that need them
@Brandon12133 ай бұрын
@@inspectahtech where can I reach you
@Brandon12133 ай бұрын
@@inspectahtech im trying to paste it here but i can't is there somwhere i can reach you at ?
@paultheretrogamer3 ай бұрын
Do you prefer Megadrive or Genesis name
@paultheretrogamer3 ай бұрын
Its still the us version of sonic cd pal only plus this binging me memories as im 47 now
@paultheretrogamer3 ай бұрын
I love yr videos
@inspectahtech3 ай бұрын
@@paultheretrogamer thank you very much!! I really appreciate that
@paultheretrogamer3 ай бұрын
@inspectahtech I'm glad you found uk version of Megadrive
@jasonhudgins94373 ай бұрын
M2
@xga3033 ай бұрын
Wow! What's the story behind acquiring this? Sitting on an operators shelf?
@inspectahtech3 ай бұрын
It was actually given to me from someone I did work for...he sent me a bunch of boards to repair and he gave this to me
@JD4Game3 ай бұрын
Finding such clean old product is the absolute best
@inspectahtech3 ай бұрын
@JD4Game its unbelievable that it was never Used!!!!
@JD4Game3 ай бұрын
@@inspectahtechsomewhere out there I like to think is a warehouse of unused retro items I will stumble upon lol
@inspectahtech3 ай бұрын
@@JD4Game that is the dream!! That would be amazing
@JD4Game3 ай бұрын
@@inspectahtech I’ll give you a call when I find it lol
@inspectahtech3 ай бұрын
@@JD4Game 🤣🤣
@daveclarency74684 ай бұрын
I currently have have a 2005 GT fore and its not working. I checked the power supply and im getting 5.1v and 12.2v I get no flash at all on status 1 light. I get absolutely nothing on the monitor, the monitor does light up. Can you help me with it? Thanks
@inspectahtech4 ай бұрын
Sure ! If you'd like to send it off to me I can definitely help you out FB is the best way to get in touch @ Inspectah Tech's Retro Repair Page
@da69one234 ай бұрын
OH damn man. Respect for you to touch that with your bare hands and continue working on it!
@inspectahtech4 ай бұрын
Thank you!! I deal with alot of this type of thing on these boards especially
@johnmay48034 ай бұрын
ive just given you a thumbs up ad it hasnt registered pal
@inspectahtech4 ай бұрын
Thank you sir!
@Megalocade4 ай бұрын
I often wonder how so many of these cps2 cases get so messed up, like heavy discoloration, bits missing or the case is just cracked and destroyed to hell, i see this a lot on ebay when buying these boards.
@inspectahtech4 ай бұрын
I see alot are absolutely destroyed! I don't know what people were doing with them...
@neonnoir96924 ай бұрын
Strangely, old aging Sega CDs are the only thing that run Sonic CD seamlessly. They never got the emulation right. I don't know wtf we're gonna do in 20 years when they're all gone.
@inspectahtech4 ай бұрын
Well hopefully all the ones I get I can keep alive for people who actually play them, and you're right it's the only system it plays 100% on
@neonnoir96924 ай бұрын
These are really, really not meant to travel or get moved around. They're super fragile. I bought one many years ago online that didn't read discs. Guy said it just sat in his closet. I was prepared to replace optical drive but the power cable to the motor had just worked itself out.