they updated it to suport hover and apple pencil pro
@prajwalsr24817 сағат бұрын
Sir what about you say in means of SIZE. Which one will be better for long term and for beginner like me to invest in first graphic tablet. Is Deco MW or Deco LW....?
@EyekooDrawsStuff13 сағат бұрын
I would say that this depends more on your screen size and budget. If you are using a 22 inch or larger screen, go with the LW. If you are using a 13-16 inch laptop screen, you'll be fine with the MW
@fatty2dope8352 күн бұрын
Does anyone have a problem where the iPad doesn’t actively show what’s happening on the pc? The iPad can control the pc but what’s happening doesn’t change on the iPad screen it’s just stuck on the screen it was connected with?
@EyekooDrawsStuff2 күн бұрын
Is it perhaps in extended mode and you just need to drag a window over?
@fatty2dope835Күн бұрын
@ I fixed it by just unplugging and replug it a few times although it gave weird error messages on the pc saying unable to make connection, and device unable to support screen capturing but it seems to be working alright. I think it may have something to do with the resolution settings
@krlosavila17123 күн бұрын
It has palm rejection?
@EyekooDrawsStuff3 күн бұрын
Yes
@fahadshah98204 күн бұрын
can i use s23 ultra for this purpose?
@EyekooDrawsStuff4 күн бұрын
You absolutely can, yes.
@copernicofelinis7 күн бұрын
The one I have just got is even older and has a serial interface connector.
@EyekooDrawsStuff7 күн бұрын
Cool! Yeah, unfortunately I couldn't get my serial version of this working. I tried with an adapter, but no luck. Maybe I'll pull it out of storage one day as a display piece on the wall
@copernicofelinis7 күн бұрын
@EyekooDrawsStuff did you set the com port to a low number? Com1 or com2? I have yet to try this (it's an intuos gd 12-12) but with other devices who have an rs232 interface nothing worked until I remembered to change the port number associated with the adapter. It was com13, and when I took it to com2 it worked.
@EyekooDrawsStuff7 күн бұрын
@copernicofelinis I'll have to remember to try this in a couple of years. I don't recall switching the port number
@caspreverest8 күн бұрын
How does it perform on larger canvases? Also, is this the 6GB or 8GB version?
@HisHifferent10 күн бұрын
Hiii, man i think i deleted my drivers for it.... where can we find it?
@EyekooDrawsStuff10 күн бұрын
Oh that's no problem at all. Head over to www.wacom.com/en-us/support/product-support/drivers and type in the model number for your tablet (usually found on the back of the device).
@xcom_rx724111 күн бұрын
I have the s9+ my first android tablet is insane way better than Apple
@EyekooDrawsStuff11 күн бұрын
Nice!! Glad it's working well for you. I've got the S9FE on my desk here now :-)
@conrad3k11 күн бұрын
Got one, about to sell it. Not sure any more if I should :D It's not in mint, but it still works in Windows 11 after all these years. Incredible!
@EyekooDrawsStuff10 күн бұрын
Ha, personally, I wouldn't sell it. I'd probably still want that reliable backup in case i misplace my pen for my main tablet, or it bombs out or something. But if there's no need to hang on to it, I'm sure a young digital art student would be stoked to get their hands on it
@akhtion-man12 күн бұрын
Which drawing app do you use?
@EyekooDrawsStuff12 күн бұрын
Please see the description
@devjesusc13 күн бұрын
I had CSP for almost a year, but since the availability of the Companion feature wasn’t very clear on their website and I couldn’t use the program on my Android phone for free, I hadn’t been using it. After watching your video, I was excited to give it a try, and the experience was fantastic. The remote control feature is incredibly easy and useful! I did encounter an issue when I first tried linking my phone, but after about an hour, I resolved it by unblocking CSP in my Windows Firewall.
@meowyanimation15 күн бұрын
Please reply me. What app do you use to drawing on Samsung Tablet? Because I don't have enough money to buy Ipad, I think I should choose Samsung Tablet.
@EyekooDrawsStuff15 күн бұрын
Hello. I put information and links for the apps in the video description
@purebreeds17 күн бұрын
I love you.
@EyekooDrawsStuff17 күн бұрын
I hope the video was interesting and helpful
@ThelemaTherion17 күн бұрын
Hello, thank you for your tutorial! I followed it but when I try to paint on photoshop from my iPad screen it doesn't work at all. Is there a way to fix this? thank you so much!
@EyekooDrawsStuff17 күн бұрын
It should. Can you elaborate more on how it's not working?
@sorako0417 күн бұрын
tried this on the ipad pro 10.5 inch with the usb connection and i feel like it's still a little bit choppy for me. Like the actual inputs have 0 delay it's just the image that's choppy, as if it's at a lower framerate. Does this happen with newer ipads as well or is it because the limitations of usb2.0 on the lightning connector?
@EyekooDrawsStuff17 күн бұрын
Hm, that is a good question and unfortunately don't have a helpful answer. I've only tested on the 2020 12.9" Pro and the 2022 version, both of which connect via USB-C.
@EyekooDrawsStuff17 күн бұрын
Is it the same in extended and duplicate display modes?
@sorako0416 күн бұрын
@@EyekooDrawsStuff unfortunately the display mode doesn't matter, after turning up the stabilization settings in krita and painttoolsai the experience became much more usable though, so i guess this is what i'll have to work with until in can get my hands on an usbc ipad to test my theory
@sorako0416 күн бұрын
it doesn't feel too bad tbh and it's definitely a good alternative to buying a whole display tablet, just takes some time to get used to
@zirantej191618 күн бұрын
Hi! What the stand that you using with your iPad? Thanks!
@EyekooDrawsStuff18 күн бұрын
It's an SKKY X38 tablet stand I got from Shopee while in Malaysia. Check out the Hoverbar Duo by TwelveSouth as well
@agogiret249819 күн бұрын
Hello. I want to buy that tablet for my son that started art high school. I want to get it witha paper like screen protection and a metal s-pen point. Would you recomend? Thanks.
@DafSpi20 күн бұрын
I tried Easycanvas with Krita, but for some reason the zoom gesture stops working after using the apple pencil. Any idea how I can solve this?
@stinenordlyng159422 күн бұрын
How do you edit the 'touch gestures'?
@EyekooDrawsStuff22 күн бұрын
The touch gestures will depend on the drawing app you are using. You can check the application settings/preferences for a Touch gesture section that might let you change them
@Ferdouse22 күн бұрын
Good video of how you can use a tablet to draw on the phone. I am able to draw directly on the phone using the Paintology app and use just one brush with opacity setting. My artworks are often mistaken as done using traditional materials.
@Paintology12 күн бұрын
Nice one, thanks for the mention!
@dorobo8123 күн бұрын
Worst thing you can do to this one is scratch the drawing surface otherwise it's unkillable. I switched to huion cause wanted a bigger size and to try that 8k sensitivity.
@EyekooDrawsStuff23 күн бұрын
100%. Which Huion did you choose and do you feel like the pressure sensitivity difference is actually noticeable?
@dorobo8122 күн бұрын
@@EyekooDrawsStuff Inspiroy giano. It has a huge drawing surface and it's the main thing for me. Of course there is a difference to sensitivity and ye it could be just some spring trick and I had some problems with the pen so the relaibility is not on the same level.
@sonansrnth28 күн бұрын
How do you set up the finger gestures? I try to do the double tap to undo and long press but none work.
@EyekooDrawsStuff28 күн бұрын
Depends on the software you are using I think
@sonansrnth27 күн бұрын
@@EyekooDrawsStuff I’m using clip studio paint and the same easy canvas version
@EyekooDrawsStuff25 күн бұрын
@@sonansrnth Have you checked the CSP settings to see that touch is enabled? What about other apps? Can you use your finger to scroll down website pages?
@pulkitjain764517 күн бұрын
@EyekooDrawsStuff i'm kind of having the same issue, touch aint working. I'm using windows and touch is enabled. I tried zbrush and ps but nothing. weird thing is, I got the ipad from a frnd and on his it works so it might have to do with something we aint aware of? I tried connecting it via usb and wireless but it aint that either
@EyekooDrawsStuff17 күн бұрын
@@pulkitjain7645 Hm, have you tried any other apps? Does scrolling web pages with touch work? Older versions of Ps had touch as an experimental setting that you had to toggle on if I remember correctly. So if you have an older version you might need to find that setting.
@wlodi218728 күн бұрын
does s-pen nib break overtime? I am thinking about getting the s9 fe or an ipad 10 and i cant decide which one i want
@wlodi218728 күн бұрын
also what is the case that is featured in the video?
@EyekooDrawsStuff28 күн бұрын
The nib will last a long while because of it being rubber on a glass surface. It will still wear down over time but this should be very slow. The case is just a cheap one I picked up from Shopee, nothing special
@ms.carlawong19 күн бұрын
do you mind sharing which tablet did you get at the end? thanks!
@wlodi218719 күн бұрын
I decided i want to get the samsung one and right now im waiting for it to be on sale
@estangiertmichperipher62Күн бұрын
@@wlodi2187good choice, the iPad 10 has too much problems
@RedditChronicles44429 күн бұрын
Do you know if there is a setting in CSP where the app doesnt let me draw with my fingers and just with the pencil?? I place my hand on the screen while drawing and its being a little (very) bothering🥲
@EyekooDrawsStuff29 күн бұрын
In your CSP Preferences, go to Touch gestures. There is a setting Use tools with finger. Disabling that should prevent the accidental touch input
@alicetruong42029 күн бұрын
Super Display or Easy Canvas is better in your opinion?
@EyekooDrawsStuff29 күн бұрын
Last I checked, EasyCanvas gave a bit more customizability. I need to give SuperDisplay another try because it's been about 2 years since I looked at it
@alicetruong42029 күн бұрын
@EyekooDrawsStuff Thank you for your information, I look forward
@joelsjogren5636Ай бұрын
8:00 this made me buy Gen 2 instead, thanks for sharing this. But i read somware that people have solved this issue with software & Firmware updates
@EyekooDrawsStuffАй бұрын
That behaviour was actually because of using a slightly magnetized flooding stand underneath that was interfering. Think I mentioned this in the pi bed comment. But still good going with purchasing the Gen 2. I am working on my review of that right now actually. I really like it
@vidyotakamat2010Ай бұрын
Hi.. Could you please tell me what app you used?
@EyekooDrawsStuffАй бұрын
For what? For drawing?
@vidyotakamat201029 күн бұрын
@EyekooDrawsStuff for the artwork
@vidyotakamat201029 күн бұрын
Yes
@EyekooDrawsStuff29 күн бұрын
@@vidyotakamat2010 I mentioned in the video description. Clip Studio Paint with computer, then infinite Painter and Magma for drawing on the tablet by itself
@vidyotakamat201029 күн бұрын
@@EyekooDrawsStuff ok.. thank you
@prayawaythegayАй бұрын
Hi, do you know if this tablet (and the Deco M) have any hardware smoothing? If it does, is the lag noticable?
@EgeYokuvaАй бұрын
türkmüsün klavyenden gördüm
@EyekooDrawsStuffАй бұрын
Haha, well spotted. No but I was visiting Istanbul last year when my laptop stopped working and I had to buy a new one there, that's why I have the Turkish keyboard layout
@MarcosantoniothebluecreatorАй бұрын
So, thats very usefull but... do i NEED a wifi board on my computer for it work? I does not have one since i am very far from wifi i always just used cables
@EyekooDrawsStuffАй бұрын
You'd need WiFi yes. But, if you go with EasyCanvas instead, you can do this with USB-C connection
@parsleybrainАй бұрын
So how do you get to show up the display of your iPad on your desktop monitor or laptop monitor? for me it only works the other way around. I can see only my windows device on my iPad, not the other way around.
@EyekooDrawsStuffАй бұрын
You can't do that with EasyCanvas. It's only to extend the PC display over to the iPad. For sending your iPad display over to computer you could try Airdroid cast. Never used this before. I can't remember the software I used a couple of years ago for this www.airdroid.com/screen-mirror/ipad-mirror-to-pc/
@larchil69Ай бұрын
i dont know why my ipad doesnt have the pressure sensitivity when using easy canvas? can you help me
@EyekooDrawsStuffАй бұрын
Hm... I'm not sure. It seems quite a few people are experiencing this with EasyCanvas suddenly, but it's working fine for me. I'll see if I can find the cause online somewhere
@sreedhar7266Ай бұрын
This is cool!!
@EyekooDrawsStuffАй бұрын
Thanks! I have a more detailed video testing out Second Screen here if you're interested to see more kzbin.info/www/bejne/l3e7f5xolt19brMsi=PvphiNlnQ9uo55dT
@shanareigarcia859Ай бұрын
I really want to buy this Samsung s9 FE. On your video, you used HMDI to connect on your pc as wires connection, so does it mean that this device is capable of using HDMI as second screen?
@EyekooDrawsStuffАй бұрын
I used Second Screen, and Miracast from the PC. If your computer supports wireless display and has wireless direct, then you can use the tablet as a wireless extended display. To use a cable, you need something like EasyCanvas, which lets you connect USB-C to usb-c
@160centАй бұрын
which one are you recommend? easycanvas or second screen?
@EyekooDrawsStuffАй бұрын
EasyCanvas because you can connect via USB-C and get a smoother connection
@Warenasx1527Ай бұрын
Hello I have a question how did you make your ps controller as a shortcut remote? Pls I wanna know ❤️and thank you ❤️your drawing skills are amazing
@EyekooDrawsStuffАй бұрын
I'll put together a guide ASAP for you. I wondered when someone might ask about this, haha. I've been meaning to make a video about it for a while
@EyekooDrawsStuffАй бұрын
@Warenasx1527 So I put together a guide on how to set up your PS4 controller as a shortcut remote on Windows :-) drawyourweapon.com/a-playstation-controller-for-digital-art-why-not/
@israeltrejo899Ай бұрын
What software or app are you using in this short?
@EyekooDrawsStuffАй бұрын
I've listed the apps used in the description of the video
@pfff.Ай бұрын
Which app is this?
@EyekooDrawsStuffАй бұрын
@@pfff. For drawing in?
@pfff.Ай бұрын
@@EyekooDrawsStuff yes drawing
@EyekooDrawsStuffАй бұрын
@@pfff. I've mentioned the software in the description. Main one is Clip Studio Paint when connected to computer. Others shown: Infinite Painter, Magma
@retrodpo1981Ай бұрын
Three seconds in and we get to see the awesome Eyekoo art/computer setup. Looking really nice! I noticed our favorite mando character on the desk as well. And we also get a look at some recent paintings. Very nice art! The input lag on any drawing display would drive me nuts since sometimes I sketch or crosshatch fast. But for people who draw slower this might not be too bad. Great video!
@EyekooDrawsStuffАй бұрын
Haha, thanks, DPO. Trying to be all neat for the video. There's normally a lot more chaos going on there with multiple devices spread out when I'm in testing mode. Haha... I'm definitely more on the slower side when it comes to drawing and painting. But for you and Andy, I can imagine that input lag being a problem. I'll be sure to spend a little bit more time showing some painting as I get back into a good groove with the videos.
@SketchPLAY1Ай бұрын
Yeah It's a great looking set up. It really looks inspiring!
@EyekooDrawsStuffАй бұрын
@@SketchPLAY1 Thank you! I must say, the sit-stand desk has been really great, as well as the monitor arm/laptop trays to free up some space on there
@peshalmadhuranga7949Ай бұрын
I have the same tablet❤❤❤
@EyekooDrawsStuffАй бұрын
Great tablet to have :-)
@gamenicity5905Ай бұрын
Does the pressure sensitivity on the apple pencile work with easy canvas?
@EyekooDrawsStuffАй бұрын
3:59 I show the pressure sensitivity in Clip Studio Paint
@Kat_Kitsune_224Ай бұрын
I have a question: i use toon boom and just got easycanvas but the pen pressure is not working, is there any way to fix it?
@EyekooDrawsStuffАй бұрын
Hm, is the pressure working in any other applications?
@RedditChronicles44429 күн бұрын
Look at the program options! I had this happen with CSP and just had yo configure it!
@EyekooDrawsStuff29 күн бұрын
@@RedditChronicles444 Do you happen to remember if it was one specific setting?
@nutellena536427 күн бұрын
@@EyekooDrawsStuff yes! (This is my other account, not any random answering) i hope i explain well enough: In CSP you have a toolbar right above the canvas, the first icon (on the left) are three horizontal lines, and right next to it at the right there is another that looks like a finger touching a tablet, I pressed the little arrow pointing down, -> touch gesture settings (a menu opens) look in the left options and select “tablet” and if “wintab” is selected, select “PC tablet” thats what i did and worked! Hope it helps!
@nutellena536427 күн бұрын
@@EyekooDrawsStuff in 4:05 you can see the button I talk about checked in blue
@aincrix51Ай бұрын
Im planning to buy a drawing tablet next year in my birthday month, but, I'm still having a little doubts and unsure if it will work properly in my smartphone cuz i hear there are few tablets that doesnt register, or it fails to work from the working ratio in landscape (and worst part, im more into a landscape drawing, and even some apps (like Rough Animator) are built in landscape in the app itself permenantly. So i wonder if it still works, or there are specific tablets that works for it, as the tablet im planning to buy is either huion inspiroy rte-100,or this vson drawing tablet, Depending where i can grasp on.
@EyekooDrawsStuffАй бұрын
Hm, as far as I can tell, that will only use a small vertical section of the tablet in it's regular landscape mode. Perhaps it's worth looking at one of the XPPEN latest models, The S640 (same price roughtly) which appears to suit the phone in landscape or portrait mode while using the full area of the tablet. Note: I have not tested this tablet myself so please do look for some reviews of it Affiliate link here with more info about the tablet: shrsl.com/4plqc
@160centАй бұрын
Sorry I'm not good at English, have you got to install the some driver on your PC for this or not? or just buy an easycanva app and go? I'm curious about the driver for pc?
@EyekooDrawsStuffАй бұрын
Drivers install automatically when installing EL Display Hub from EasyCanvas website.