The T30 are a waste to put back on. The reason for the T30 screw was for assembly line to keep rotor from falling off while traveling down the assembly line. At the end of the assembly line is when wheels are mounted with lug nuts..the mounted wheels will hold the rotor on to the hub..no need for T30
@olliec55Ай бұрын
Toss the T30 screws
@diywithburgess9065Ай бұрын
Honestly I agree with you, just don't want to be blamed by someone who thinks that is what caused a problem after watching one of my videos, but yes, it's useless
@rebelcave85563 ай бұрын
DDIY ...DON'T DO IT YOURSELF.... ALWAYS USE A TORQUE RENCH TO TIGHTEN YOUR TIRES. Even putting tires on too tight is bad because they can buckle someday. Also draw a line with a sharpie across your caliber bolts to the knuckle and match the line back up to factory torque when you put them back on.
@farhaanahmad94446 ай бұрын
Thanks for step by step guidance. Good video
@diywithburgess90656 ай бұрын
Glad it was helpful!
@jcmelendezxx6 ай бұрын
Great video!
@diywithburgess90656 ай бұрын
Glad you enjoyed it
@dominicdrinks60296 ай бұрын
With the electronic parking system, do you have to disconnect it before pushing the brake caliber piston back in or can you still push the piston back with electronic Parkin system still attached?
@diywithburgess90656 ай бұрын
No, it will go back in fine as long as you don't have it engaged
@Cembruh7 ай бұрын
What a great video! I am trying to do my rears which are a bit different.
@diywithburgess90656 ай бұрын
Thank you
@option_dnb75147 ай бұрын
Thanks a lot, got mine done fairly quick
@diywithburgess90657 ай бұрын
Glad I could help.
@jeffreybanks051910 ай бұрын
Any idea what torque specs are for the different bolts?
@diywithburgess906510 ай бұрын
Unfortunately not off hand, I will try and find out for you
@diywithburgess906510 ай бұрын
Drivebelt tensioner mounting bolts torque is 16 ft-lbs. Drivebelt tensioner pulley bolt is 41 ft-lbs. Power steering pump mounting bolts torque is 16 ft-lbs. Good luck!
@jeffreybanks051910 ай бұрын
@@diywithburgess9065 Thanks!!!
@austinrodriguez632611 ай бұрын
thanks for this !
@diywithburgess906511 ай бұрын
You bet!
@aldohernandez19 Жыл бұрын
Idk if you could answer this as soon as possible but the longer bolt that goes back to help but on the belt well my problem is when trying to put on the belt the bolt tends to loosen and there’s no other way of putting on this belt…
@diywithburgess9065 Жыл бұрын
Are you sure you are on the right bolt? Should be the bolt on the pulley.
@aldohernandez19 Жыл бұрын
@@diywithburgess9065 you saved my life right now once you said maybe wrong bolt I went back to check and I was on the wrong bolt thank you brother🤘🏽
@diywithburgess9065 Жыл бұрын
Glad I could help
@clydria9 Жыл бұрын
what tool you use to loosen lug nuts . mexican kept mine and i’m trying to go get it. just need to know what’s it called
@madisonlewis5084 Жыл бұрын
Lug wrench
@diywithburgess9065 Жыл бұрын
Impact driver or lug wrench.
@householdbro4202 Жыл бұрын
Thanks bitch
@alexisvargas9068 Жыл бұрын
you rock dude! this has helped me a lot.
@diywithburgess9065 Жыл бұрын
You're welcome, don't forget to subscribe
@rhondawilliams30 Жыл бұрын
We have got the other 2 parts loose but can’t seem to get the 12mm bolt off.
@diywithburgess9065 Жыл бұрын
I explained on your other message, were you able to get it?
@willpage79 Жыл бұрын
Did you strip the bolt
@rhondawilliams30 Жыл бұрын
How did you get the wrench onto the 12mm bolt ?
@diywithburgess9065 Жыл бұрын
You can't see it so it has to be done by touch. It's easiest to get it with a socket and ratchet than it is with a wrench. I see this was a week ago I hope you were able to get it, sorry for the slow response I didn't see this until today
@willpage79 Жыл бұрын
You could take the wheel off and you could see the 12mm bolt too and you could take the tensioner from there too with a extended long wrench
@stanislav2278 Жыл бұрын
Thanks for the video!
@diywithburgess9065 Жыл бұрын
Your welcome
@brianb55052 жыл бұрын
Hey what about all the cussing and throwing stuff. Something fishy is going on around here. 🤔