How to change belt tensioner and idler pulley on a 02-07 Honda Accord pilot Ridgeline odyssey 3.0 v6

Honda Accord, pilot, Ridgeline and Odyssey 2002-2007 3.0 v6 idler pulley belt tensioner pulley and assembly

[@option_dnb7514]

Thanks a lot, got mine done fairly quick

[@diywithburgess9065]

Glad I could help.

[@farhaanahmad9444]

Thanks for step by step guidance. Good video

[@diywithburgess9065]

Glad it was helpful!

[@alexisvargas9068]

you rock dude! this has helped me a lot.

[@diywithburgess9065]

You're welcome, don't forget to subscribe

[@stanislav2278]

Thanks for the video!

[@diywithburgess9065]

Your welcome

[@aldohernandez19]

Idk if you could answer this as soon as possible but the longer bolt that goes back to help but on the belt well my problem is when trying to put on the belt the bolt tends to loosen and there’s no other way of putting on this belt…

[@diywithburgess9065]

Are you sure you are on the right bolt? Should be the bolt on the pulley.

[@aldohernandez19]

@@diywithburgess9065 you saved my life right now once you said maybe wrong bolt I went back to check and I was on the wrong bolt thank you brother🤘🏽

[@diywithburgess9065]

Glad I could help

[@rhondawilliams30]

We have got the other 2 parts loose but can’t seem to get the 12mm bolt off.

[@diywithburgess9065]

I explained on your other message, were you able to get it?

[@willpage79]

Did you strip the bolt

[@rhondawilliams30]

How did you get the wrench onto the 12mm bolt ?

[@diywithburgess9065]

You can't see it so it has to be done by touch. It's easiest to get it with a socket and ratchet than it is with a wrench. I see this was a week ago I hope you were able to get it, sorry for the slow response I didn't see this until today

[@willpage79]

You could take the wheel off and you could see the 12mm bolt too and you could take the tensioner from there too with a extended long wrench

[@jeffreybanks0519]

Any idea what torque specs are for the different bolts?

[@diywithburgess9065]

Unfortunately not off hand, I will try and find out for you

[@diywithburgess9065]

Drivebelt tensioner mounting bolts torque is 16 ft-lbs. Drivebelt tensioner pulley bolt is 41 ft-lbs. Power steering pump mounting bolts torque is 16 ft-lbs. Good luck!

[@jeffreybanks0519]

@@diywithburgess9065 Thanks!!!

[@brianb5505]

Hey what about all the cussing and throwing stuff. Something fishy is going on around here. 🤔

[@diywithburgess9065]

I'm good at editing 😂