Man I just sprayed the horse trailer with a hf gun lol we use them a lot. I like these videos and the fact you don’t hide stuff.
@V8velocityracing26 минут бұрын
lol great one 😂
@michaelmatern128429 минут бұрын
Courtney I will say it again man you are bad azz just saying
@ballindirty30 минут бұрын
Hahahaha my tape won't stick blame harbor freight
@JudgeMeNotLeMans42 минут бұрын
Curious on the difference between a HF purple gun or their “Professional Black gun vs. a $1K gun and also would the better gun make a big difference in the quality of a job just this one?
@ThePaintPaperHustle41 минут бұрын
People have reviewed all them guns. A gun does affect the paint when you’re painting at a certain level. When at this level the HF gun out preforms my $800 gun
@dropbear952645 минут бұрын
You could've added that blue ghost pearl that you got for Percy but never used. Nando grey and blue ghost pearl is all the rage atm.
@ThePaintPaperHustle42 минут бұрын
It is getting saved for something else 🤫
@MrTimNedСағат бұрын
Great 20 footer
@ThePaintPaperHustle42 минут бұрын
💎
@Hammerback0Сағат бұрын
Is that a harbor freight gun? Courtney, you and I could be long lost brothers. If only i had your abilities to do "quality" paint jobs! My quality is your "eh. Not even gonna wash it. Just slingin this quart of paint in the direction of the car and sell it" jobs. 😂😂
@ThePaintPaperHustleСағат бұрын
lol man yea it’s harbor freight 💪🏻
@MrScottr1958Сағат бұрын
Nothing wrong with that paint job. You've taken a cheap crap car and made it presentable for nothing.
@ThePaintPaperHustleСағат бұрын
💪🏻
@donald-14632 сағат бұрын
Where's Ed at
@ThePaintPaperHustleСағат бұрын
Working lol
@donald-14632 сағат бұрын
Tell the HOA and then the neighbors great explanation ain't anyone gonna look just pay you and leave
@ThePaintPaperHustleСағат бұрын
🫡
@donald-14637 сағат бұрын
Early looking NASCAR Daytona ❤
@ThePaintPaperHustle3 сағат бұрын
Good point!
@timothygoodsell1446Күн бұрын
Good info 💪
@ThePaintPaperHustle14 сағат бұрын
🫡
@jeffgraham48Күн бұрын
Into the good stuff now. Filler smells like money..
@ThePaintPaperHustleКүн бұрын
Love it!
@Rick-or2ylКүн бұрын
Too much filler right over paint. Not proper
@MrTimNedКүн бұрын
@@Rick-or2yl okay, expert you must be. As long as the paint is attached well, no cracks or peeling, it will beer fine
@ThePaintPaperHustleКүн бұрын
Yea I do this day in and day out and honestly don’t care lol
@ronmiller1162Күн бұрын
back in 1999 i took a job at a tour bus bodyshop leaving a collision shop paint room what a change it was i thought paint here or paint there whats the difference well everything was different so we had 53 busses 45 foot long some were steel and stainless , some were all aluminum , some were all fiberglass they all got striped to bare substraight around all of the windows all of the busses had a super soft metal im not sure what it was but it corrode so our jobber guy told us about rolling on ppg k36 surface primer and thats what we did and loved it and used this method in the car industry also three or four coats they dry fast build is great and absolutely no clean up or overspray to blame on the painter we did a bus a week me and one other guy it took us 52 weeks to complete
@ThePaintPaperHustleКүн бұрын
Yea I’ve heard good about the roll on primer just never done it yet so definitely interested in trying
@rachalhollier5679Күн бұрын
Yeah brother!! Hands down to your tutorial . You can’t do a better job at what you’re doing. Great work,& content.
@ThePaintPaperHustleКүн бұрын
Thanks buddy
@keithgriffith6002Күн бұрын
She’s coming along nicely. I’ve learned so much from you. Thank you.
@ThePaintPaperHustleКүн бұрын
Thanks for watching!
@philbetthauser9547Күн бұрын
It looks like you might have put body filler on a car once or twice lol. It definitely changes the look of the cars body lines! Things are looking great .
@ThePaintPaperHustleКүн бұрын
lol possibly
@MrScottr1958Күн бұрын
One day you will learn patience, not today, but one day. Keep up the good work.
@ThePaintPaperHustleКүн бұрын
lol how can I not be more patient then I am now? Man I don’t even touch this thing all week and then only work on it some on the weekends. Not rushing anything at all.
@stacetriebwasser6425Күн бұрын
Great information for the shade tree diy guy at home!
@ThePaintPaperHustleКүн бұрын
Thanks
@MrTimNedКүн бұрын
Brother, you are working on a 49 car, play appropriate music. 50' s 60's. Lol. Don't do rap. Peace Brother. Tim
@ThePaintPaperHustleКүн бұрын
Man I can’t handle 50s 60s music lol that’s to old for me
@MrTimNedКүн бұрын
@@ThePaintPaperHustle I'm an old fsuck. Lol
@ThePaintPaperHustleКүн бұрын
lol I understand
@StallionsstableКүн бұрын
Have you always pressure washed before priming? I was always taught for it to never get wet until it is primed
@ThePaintPaperHustleКүн бұрын
yes always every single job. Doesnt matter as long as its dry
@StallionsstableКүн бұрын
@@ThePaintPaperHustle wish I would have known that, I been doing it the hard way lol
@StallionsstableКүн бұрын
I still use the dolphin glaze and upol gold under it. Are you still using the same or have you found anything better?
@ThePaintPaperHustleКүн бұрын
@Stallionsstable you’ll love your work and jobs so much better when everything is super clean. Think about it…. If it’s dry after washing then what’s the difference in not washed and dry? Dry is dry.
@StallionsstableКүн бұрын
@@ThePaintPaperHustle I agree with that. I can’t stand the dusty desert at times lol
@MrTimNedКүн бұрын
The body filler I have, makes me the metal man I ain't... Looking good Courtney. And the smoother you put filler on, the easier it sands down. Peace brother
@ThePaintPaperHustleКүн бұрын
forsure man lol
@fixinstuff96622 күн бұрын
I just finished watching Bad Chad put six flex tubes on a car for exhaust, so thank goodness this video dropped. Yikes! 🤣
@ThePaintPaperHustleКүн бұрын
LOL
@NonTypicalRacingКүн бұрын
I can't watch that guy unless I'm drinking.
@ThePaintPaperHustleКүн бұрын
@NonTypicalRacing 😂
@stephencarter14422 күн бұрын
Slinging Mud its your fault I came out of retirement and Blocked two fenders this weekend.! Blowing a quarter panel out my nose again Oh Joy!. Nice work Brother. Love the direction.
@ThePaintPaperHustleКүн бұрын
LOL thats awesome buddy!
@jdkotara1302 күн бұрын
Don't forget to measure front sun visor
@ThePaintPaperHustleКүн бұрын
i responded to your other comment this weekend. Its around 52"
@chrisbrankel82712 күн бұрын
You should never be putting body filler over that old lacquer paint
@ThePaintPaperHustle2 күн бұрын
It’ll be ok. No way in the world am I stripping this car down to metal
@MrTimNedКүн бұрын
@@ThePaintPaperHustle if the paint is solid, doesn't matter. Keep on !
@mike-ws4hl2 күн бұрын
Looking good !! well explained and well done!!!
@ThePaintPaperHustle2 күн бұрын
Thanks
@Amxracer2 күн бұрын
Cool 😎 ! I can’t wait to see the chassis progress. But yes definitely get the body in Epoxy first it will for sure bring motivation and direction to the project.
@ThePaintPaperHustle2 күн бұрын
Yea man same! My brain is in over time on the body modifications at the moment though
@michaelmatern12842 күн бұрын
Courtney you make it look so easy but you are a professional man you do such good work
@ThePaintPaperHustle2 күн бұрын
Thanks buddy
@freddiemoralez15362 күн бұрын
Definitely makes sense to ruff in a little at a time. I just watched halfass customs get burned out on sanding body filler 😅👍💪😎
@ThePaintPaperHustle2 күн бұрын
Yea don’t do that lol it’ll be a lot of work if you wait till the end
@user-ug7zg4vy3z2 күн бұрын
I’ve missed the motivation voice over stuff thanks for bringing it back
@ThePaintPaperHustle2 күн бұрын
You’re welcome!
@89_boostedsupra2 күн бұрын
This thing gonna be so bad a$$ man. Keep up the awesome work
@ThePaintPaperHustle2 күн бұрын
Thanks man we just getting started 😈
@Vegeta-pp4vm2 күн бұрын
Very helpful 🎉🎉🎉
@ThePaintPaperHustle2 күн бұрын
Awesome!
@fireman6022 күн бұрын
Do you have any parts left from this red maverick?
@ThePaintPaperHustle2 күн бұрын
I have a few odds and ends
@brentvonaschen70642 күн бұрын
Looks great
@ThePaintPaperHustle2 күн бұрын
Thanks
@JasonHulse-u2h2 күн бұрын
Can you come paint my car?
@ThePaintPaperHustle2 күн бұрын
Unfortunately you’d need to bring it to me
@twistymcfistysback2 күн бұрын
I was going to go with them, but after the community feed back and nightmare stories and bad feedback I had to go to a different direction.
@ThePaintPaperHustle2 күн бұрын
Best of luck to you on your build
@OEFarredondo3 күн бұрын
Amigo... dont put me outta bussiness
@ThePaintPaperHustle2 күн бұрын
This junk ain’t putting no one out of business 😂
@OEFarredondo2 күн бұрын
@@ThePaintPaperHustle hahaha yeah... nonI think so tho
@jgneolardo88753 күн бұрын
something about this instrumental makes me hear Bad Bunny mumbling in the background
@ThePaintPaperHustle3 күн бұрын
😂 that’s horrible
@garrettmccarty26423 күн бұрын
What was the hole size on the flange? I need to swap mine but I think the hole may be too big.
@ThePaintPaperHustle3 күн бұрын
If I didn’t say it in the video then unfortunately I don’t know off the top of my head
@garrettmccarty26423 күн бұрын
@@ThePaintPaperHustle ah gotcha thanks!
@jdog_70273 күн бұрын
You should checkout Fitzee’s Fabrication channel on here. He has some really good videos of cutting out rusted panel parts and welding in new.
@ThePaintPaperHustle3 күн бұрын
I’m actually also subscribed to his channel also. Been checking out a lot of these guys thanks for that info!
@robertmurraysr4 күн бұрын
Compound turbos on 4BT
@ThePaintPaperHustle3 күн бұрын
Forsure!
@edwardjones27484 күн бұрын
Learning a lot from you
@ThePaintPaperHustle4 күн бұрын
Awesome!
@mikemontgomery73374 күн бұрын
I do love this build but I really wanna see the Comet. I wanna see it make some passes even if John drives it. Just curious if you finally got it dialed in !!
@ThePaintPaperHustle4 күн бұрын
Thanks buddy. I haven’t touched it since the last time John drove it. Haven’t even started it or seen it. Keep telling myself weekly that I need to go start it bc I’m sure the methanol is destroying everything.
@mikemontgomery73374 күн бұрын
This build takes balls to start chopping !! Kudos to you !! I could never start hacking a car !!😎
@ThePaintPaperHustle4 күн бұрын
lol it’s just metal buddy. You can always fix it or just scrap it and go find another one
@ronfollrod98934 күн бұрын
What’s your take on the .023 welding wire? Does it lay out flatter?
@ThePaintPaperHustle4 күн бұрын
Seems to weld better. It’s a hit and miss on laying flatter which is probably operating error. But I do like it
@fixinstuff96624 күн бұрын
I know where there's a 8.2L Cadillac, but it's too late I guess.
@ThePaintPaperHustle4 күн бұрын
Yea we going with the cummins
@ThePaintPaperHustle4 күн бұрын
Thank you though
@MrTimNed4 күн бұрын
Your work ethic is incredible. Way to go brother. Looking incredible