because the grind is too fine

51mm

Thank YOU

51.0 mm

@@YevgeniiKondratiuk thank you!

окремо www.aliexpress.com/item/1005004457142294.html

так, холодильник буде працювати, якщо вистачить ємності аккумулятора www.aliexpress.com/item/4000750906935.html , це версія 3000 W 12 V

Try a coarser grind or not tamping as much or both

Hi, try less fine grind or do not tamper so hard or both

it's difficult to explaine, but it's should be finer than avarage grind, almost like for proffessinal one

@@YevgeniiKondratiuk Thank you very much! That is what I thought too. Cheers!

Hi. It stoped working after more then 5 years, before that everything was fine. Maybe it was maintainable, but I desided to buy new model.

Would you recommend it?

@@mohammadaltaher82 definitely

One last question, Do you use the krups gvx242? And if you do, is it good?

@@mohammadaltaher82 never use it, sorry for no help

Je ne sais pas si c'est un bateau à vapeur, fais de la vapeur

Je ne me souviens pas exactement, mais vous devez attendre que le voyant cesse de clignoter, jusqu'à 30 secondes environ

@@YevgeniiKondratiuk merci beaucoup

You can froth anything using this technic: • pour milk into the glass (or something like that for frothing) about half the volume of the glass • turn on the coffee machine for steam heating • after heating the coffee machine, lower the steamer a little into the milk and turn on the steam • keep the steamer slightly submerged in the milk in such a way that foam will form, but there would not be too large bubbles • if the steamer is correctly positioned in milk - milk will begin to grow in size, try to keep the steamer in the same position relative to milk by gradually lowering the container down • control the temperature of the milk by hand - it should not burn • if the milk seems to be not warm enough - you can lower the steamer below into the milk and heat it For not spoiling a lot of milk try this first: kzbin.info/www/bejne/iIayY4OBmbuVrKc

@@YevgeniiKondratiuk Thanks now is perfect

for sure, make it, then cool it

Это кошка

My machine started to drip water through steamer after 5 years of use. I don`t know whether going to fix it or get new one. Still makes good espresso, having problem only with steaming milk.

Нет, если просто нагреть молоко, его не станет в 2 раза больше. Взбивает хорошо, но до профи не дотягивает, здесь соглашусь. Для "рисования" также желательно брать молоко более длительного хранения, а не двухнедельное.

It's a tamper

@@YevgeniiKondratiuk thanks!

@@YevgeniiKondratiuk also known as an ANAL PLUG in between friends

I have been using it for over 4 years. No problem. Slow but flexible and powerful enough for the home.

Налить кофе в взбитое молоко kzbin.info/www/bejne/qaSTamysm5pnb9E

Hi, 51.0 mm

Je suis désolé, mais je ne sais pas, probablement pas. Il s'arrête tout seul dans environ une minute

@@YevgeniiKondratiuk Merci

Насколько я помню, по инструкцию не рекомендуется взбивать более 1 мин. Проверьте в своей инструкции, если этот параметр не изменился и после 20 сек поршень перестает работать, то скорее всего брак.

51.0 mm

51.0 mm

@@YevgeniiKondratiuk thanks

y ahí está. Sugiero usar un filtro de 2 tazas y completar la extracción en unos 15 segundos.

into the sink

I clean steamer everytime after sreaming milk, you can see it on this video, after 2:00. Also I clean spot for coffee filter pour out water from below. That's all. I've never have to clean it with citric acid or something like that, maybe due to using very soft water. kzbin.info/www/bejne/q2WWZq2biLSNfNE

@@YevgeniiKondratiuk Thank you for sharing... 😉

Поршень стучит, кофеварка нормальная

@@YevgeniiKondratiuk просто нормальная?)Думаю стоит брать или гейзер оставить

@@MiKe-fe6bd это другой уровень совсем, если нужна рожковая кофеварка, то это одна из лучших за эти деньги, по моему скромному мнению. У меня уже больше 4-х лет она, кофе делаю каждый день. Главное, чтобы вода была мягкая, идеально после осмоса, тогда долго проработает без проблем.

@@YevgeniiKondratiuk спасибо за советы)

hi, 51.0 mm

@@YevgeniiKondratiuk thanks!

51.0

Thank you I just read in the other video somebody ask the same question . Regards 😊 and thank you to answer !

you will have to wait until button stops blinking

Hi, thanks you! I hope it will help: - pour milk into the glass (or something like that for frothing) about half the volume of the glass - turn on the coffee machine for steam heating after heating the coffee machine, lower the steamer a little into the milk and turn on the steam - keep the steamer slightly submerged in the milk in such a way that foam will form, but there would not be too large bubbles - if the steamer is correctly positioned in milk - milk will begin to grow in size, try to keep the steamer in the same position relative to milk by gradually lowering the container down - control the temperature of the milk by hand - it should not burn - if the milk seems to be not warm enough - you can lower the steamer below into the milk and heat it

... or use link for the same tips: 4coffee4.com/2018/10/06/krups-xp-3440-home-espresso-machine-latte-macchiato/

@@YevgeniiKondratiuk thank you for the fast reply👏🏻 I think my method is about the same as yours, but maybe I need some more practice 😉😄 Thanks for the helpful instructions, I'm going to buy loads of milk tomorrow for practicing 🥴💪🏻😄