idahoron

Пікірлер

@shane7969 5 күн бұрын

why is it specifically for muzzleloader? im thinking about putting this on a Ruger 77/357 with NECG rear peep sight. do you see any reason that would not work?

@idahoron 5 күн бұрын

@shane7969 if you get the right one it should work.

@madalex300 24 күн бұрын

Looks like a blast 🤠

@michaellorusso4912 2 ай бұрын

God Bless you muzzleloading guys, don't think I'd have the patience for it. Great instructional video. well done.

@blueridgeboy6791 2 ай бұрын

Man i love these videos. Thankyou for what you share with the rest of us. I definitely want to try some paper patched bullets.

@tonyturner487 2 ай бұрын

I have a pair of old renegades that are in dire need of cleaning. Are the breech plugs right hand thread?? I mean, they’re terrible.

@idahoron 2 ай бұрын

@tonyturner487 I would not remove the plug. If it's rusty I would fill the barrel with white vinegar and let it set.

@tonyturner487 2 ай бұрын

@@idahoron sounds like a plan. I’ll give that a shot. But, I need to ask, why is it that everybody is against removing the breech plug?? Am I missing something?

@idahoron 2 ай бұрын

@tonyturner487 they are very difficult to remove and they are difficult to line back up. If you feel up to it and have a breech plug wrench, go for it. The best way to learn is first hand.

@TwoStageTrigger 4 ай бұрын

Gotta try this with my traditions nipples. My cci #11 caps fall off, and i just got 1k on midway usa. So different caps isnt an option.

@efrey1911 4 ай бұрын

Your posts in hunting forums about your TX200 is what convinced me to plunk down my hard earned money for one. I’ve been forever grateful ever since. Thanks, Ron! Hey, what’s your son shooting here?

@idahoron 4 ай бұрын

@efrey1911 congratulations! I've got 15K rounds through mine. I've put new seals and a new spring in it a couple times. I put in a new compression tube and piston this year. It shoots like a new rifle.

@idahoron 4 ай бұрын

It's a crossman pump

@efrey1911 4 ай бұрын

@@idahoron thanks, Ron! I’d sure like to see more of your TX200 videos in the future, although I know filming can ruin the flow and specialness of a hunt. Be well, friend! 👍

@Chrissers2010 6 ай бұрын

The Treso nipples I have used have a very nice fit with a RWS #11 cap, in fact it has been a bit on the too snug side. Also, I take a #68 drill and open up the flash hole from 0.028" to 0.031".

@idahoron 6 ай бұрын

That drill size is perfect for pyrodex

@tonycalp9162 6 ай бұрын

what is the barrel twist on your Green Moutain Barrel?

@idahoron 6 ай бұрын

The 45s are 1-30 the 50's are 1-28

@KeithHierman 6 ай бұрын

Thanks Ron

@shaunsian4784 6 ай бұрын

Was that an aftermarket barrel or did sand it or polish it to look stainless steel like

@idahoron 6 ай бұрын

That barrel is a Green Mountain LRH stainless steel fast twist barrel. It's aftermarket.

@OntarioPrepper 6 ай бұрын

Thanks for sharing this. great information and is easy to follow and understand ❤

@dermlover1 8 ай бұрын

Do you ever get sunburned while wearing this hat? Please be honest.

@idahoron 8 ай бұрын

I'm not paid by the company. I paid for my hat, so I'm giving an honest review. It's a very good hat. I've never been sunburned. Not once

@arthurbretas2003 9 ай бұрын

Definitely making one for my XR200

@johnhoward7298 10 ай бұрын

What twist rate & barrel length & cal. do You recommend/ use ? to paper wrap bullet

@blueridgeboy6791 Жыл бұрын

The legend has a KZbin channel so glad I finally found it. Idaho lewis brought me here.

@idahoron Жыл бұрын

Thanks for watching.

@Apexpurrfection Жыл бұрын

Too long. Where is the attack part

@blackhrt5507 Жыл бұрын

How does it effect the guns zero

@idahoron Жыл бұрын

I never had an issue with it.

@blackhrt5507 Жыл бұрын

@@idahoron my thought was Rideing on rough trails and constant vibration of the forks it might effect zero

@idahoron Жыл бұрын

@blackhrt5507 depending on the scope and mounts, your concerns are valid. That said. I've carried several rifles in this boot.

@kevinroberson1985 Жыл бұрын

P.S my long rifle is a green mountain barrel 40 cal. And the dia. Is .410 and my barrel length is 42 inch long. With a twist rate of 1 in 36 I hope and pray it will shoot long paper patch boolits. I'm only wanting to shoot at the maximum of 200 yards or a little more and I hope it will stabilize my boolits. Please let me know what you think about my barrel twist it is the only barrel at the time I could find in 40 cal. With that twist rate all the others were 1in48 twist rate . and I have a Pennsylvania Lancaster long rifle I built my self and it has pedasoli back sight and Lyman aperture front sight with a level bubble and like 10 or more apertures for it. I have spent a lot of money and time building this rifle and if it doesn't shoot real good I guess it will be a expensive wall hanger.

@idahoron Жыл бұрын

I would look at bullets in the 300 grain range. 400 will be too long. If you have a Lyman 17 style glove sight, use the Lee Shavers BPCR inserts. They are awesome

@idahoron Жыл бұрын

I was thinking 45 cal. On a .410 with a twist of 36, I think I would look at 200 gr to 250 gr.

@kevinroberson1985 Жыл бұрын

I'm so glad you told not to lube my paper patch boolits because I was having problems loading my bullets in my muzzle loader. Is it okay to lube the barrel after I push my bullet all the way down and seat it on my powder charge. And I mean a lite amount of lube in my barrel in front of my patched bullet?

@idahoron Жыл бұрын

You can. I don't worry about it for my stainless steel guns. I have lubed blue steel guns. I would test it to see how it affects the groups.

@scottbrightman3662 Жыл бұрын

Hello, I just put a Lyman receiver sight on my renegade 54 caliber percussion. I was just wondering if you can give me some advice please on how to site in this site. And I’m hoping it’s not too complicated and I’m hoping also it’s easy. thank you

@idahoron Жыл бұрын

So let me see if I understand you. You have a Lyman peep sight on your Renegade. Now you are inquiring how to sight it in. Is that correct?

@idahoron Жыл бұрын

Did you install a Lyman front sight or are you using the original TC Renegade sight?

@scottbrightman3662 Жыл бұрын

That is correct. I’m just wondering if I should put a Thompson center front site globe on it as well?

@scottbrightman3662 Жыл бұрын

@@idahoron I had installed number 57 receiver site by Lyman. From track of the wolf. Which, by the way, is an evil place. I can plank down a wad of cash and still be in thousand dollars in debt. Lol.

@idahoron Жыл бұрын

@scottbrightman3662 I installed the Lyman 17aml globe sights on several rifles. I use Lee Shavers BPCR inserts. You might need to shim the front of the Lyman 57sml peep to get it to travel vertically a bit better. On some tangs, they tend to lean forward a bit. Sighting in is pretty straightforward. Start at 50 yards and shoot.

@KentJasperson-z2k Жыл бұрын

Sugar Cube Creek comes through again.

@michaeleveleth7979 Жыл бұрын

Not sure if you remember me but I remember you. Found your page and was hoping you might sign on again. Good to here you voice!

@idahoron Жыл бұрын

I most certainly remember you!! In fact, I was just talking about you helping me with the fishing project. It's really good to hear from you!!

@idahoron Жыл бұрын

I am sorry about the quality. I'm using a new video editor.

@heatherlaskos8654 Жыл бұрын

So cool!!!

@99Victor Жыл бұрын

Where? What equipment are you using? Have gone more times or how often do you go?

@idahoron Жыл бұрын

Fox squirrels are all over South Idaho. We use air rifles.

@OMGWUNSIU Жыл бұрын

What about the small hole? did it function reliably on your gun?

@idahoron Жыл бұрын

For pyrodex P the hole has to be enlarged to .034

@Animalit55 Жыл бұрын

They do it for spawning

@t.c.2776 Жыл бұрын

pretty slick Ron...

@t.c.2776 Жыл бұрын

I don't understand how turning the head around gives you 5 speeds backwards... if you just turn the head around, so it's aimed towards the propeller that does not change forward or back in the switch... you still have 5 forward and 3 reverse... even if you just turn the whole unit around so the propellor is in the front and you run it in reverse to go forward, you still only have 3 reverse speeds to move you forward so doesn't really change anything.

@idahoron Жыл бұрын

When you turn the head 180 degrees now the motor is set up to pull backward with the tiller at your back. By switching it now you have 5 speeds dragging the boat backwards.

@AtlasVanderbelt Жыл бұрын

Is it rated for rovers?

@3jaragon Жыл бұрын

Awesome information 👍🏼

@jamesbowie8874 Жыл бұрын

Thanks for this video. Answered all of my questions about this method in 2 minutes. Do you need a fitting? No. Do you leave the valve button in? Yes. Do you top it up with a hand pump? Yes. Straightforward, no filler!

@dustinj7650 6 ай бұрын

thinking you can probably also get a 2nd one way H2(?) valve adapter - screw that in first, inflate, and then remove adapter, which will also keep the air in.

@dustinj7650 6 ай бұрын

ok I compared the two methods - having the valve open as shown in the video is much much quicker than using the H2 connector attached to the closed valve.

@austin5657 Жыл бұрын

I’m looking to replace my valves on my classic accessories pontoons as they broke this winter. I noticed your valve you showed had a yellow cap for the spring, is that the one built from the factory or an Amazon valve look alike? Classic accessories sells the valves for $25 and Amazon has similar valves for less but unsure which one works as they just are universal. Thanks!

@idahoron Жыл бұрын

That valve is actually one from outcast.

@mcboyz1173 Жыл бұрын

Watching this for pleasure be a squirrel are destroying everything

@michaeleveleth7979 Жыл бұрын

Hi Ron Michael Eveleth here just checking in

@idahoron Жыл бұрын

It's good to hear from you!!

@Porky186 Жыл бұрын

Thank you Ron, love all your videos…shorty

@toolman.dustin Жыл бұрын

thanks for sharing.

@kirkethridge2500 Жыл бұрын

i read that "creedmoor" shooters wrapped with wet paper, let them dry before shooting,,, didn't say anything about lube, so i assumed it was with water..???? Seems the paper patch bullet was the instrumental in the destruction of the american bison herd!! paper patching is much easier than lubing by hand!!! my new rice 45 barrel is going to be well tested with paper patched bullets!!

@Zeus_22 Жыл бұрын

Geez, by the end of the negotiation the guy selling it will be paying you to take it.

@idahoron Жыл бұрын

If it is in poor enough condition. Maybe they should pay to get rid of it.

@mpetrangelo Жыл бұрын

nice fix.

@thomastehan9477 Жыл бұрын

3/4 ID or 3/4 OD tubing?

@idahoron Жыл бұрын

@thomastehan9477 Жыл бұрын

@@idahoron Thank you.

@John-gj1jr Жыл бұрын

Are those 3/4" or thereabouts in diameter?

@idahoron Жыл бұрын

Yes they are

@John-gj1jr Жыл бұрын

@@idahoron Thanks

@jcoats5529 Жыл бұрын

My Minn kota has 5 speeds in reverse. What your saying is that forward but turning the head 180 is more efficient? Really not following what you're saying

@idahoron Жыл бұрын

Most have 5 forward speeds and reverse. If you take the bolt out of the head and rotate 180 degrees, the tiller will be right behind you, pointing at your back. Now, it is set up to troll backward. You will have more flexibility with speed control. You will be able to fish hands-free by steering with your fins.

@dr.s.p. 2 жыл бұрын

Nice work.

@AyOutdoorTv 2 жыл бұрын

I we’ll love to go hunt out there

@mineadventures7938 2 жыл бұрын

Beautiful camper. My only complaint would be, the interior is so impersonal, the colors. I have a 1988 I just purchased used. I got to remodel and give it personally. My other complaint, FWC does not answer their phone, so beware if you need help from FWC. I called ATC campers and they not only answer, they have parts, so screw FWC, they suck for taking care of customers.

@ArgoPower 2 жыл бұрын

6:16 why you are not using some marker instead to score the nipple with the cutter?

@catharinalausen6263 2 жыл бұрын

And I saw if you want a new mone buy it!

@MrTrashRat 2 жыл бұрын

Balloon

Ең жақсы KZbin

Пікірлер