I tried to remove the burr like in the video but the handle just came off and the burr stayed in. Help
@scottwillson556225 күн бұрын
i'm getting a lot of grinds everywhere, which seem to be thrown by static electricity. even after tapping and pulling and pushing the plunger at the top, when the cup is pulled out, a lot of grinds are falling. any suggestions? it's been the messiest grinder i've ever used. i'm sure i'm doing something wrong.
@BomboraSupplies23 күн бұрын
Hi Scott, Thanks for your enquiry. Can we confirm what implements you are using to clean the grinder? We have found that a small air blower such as the UES Air Blower Dust Blaster can help to clear coffee out of the hard to access areas. If you would like to give our team a call , we can discuss directly. help.fellowproducts.com/hc/en-us/articles/12697463022619-The-anti-static-on-Opus-stopped-working-and-it-s-messy
@suave3330Ай бұрын
Can you chose cup size? If so, what are they?
@bernardpeters503629 күн бұрын
Hi there, this unit works well for 4 - 12 cups!
@suave333024 күн бұрын
@bernardpeters5036 copy, thanks.
@DrMcSuperKidCoolАй бұрын
This was really helpful. Thank you for creating this content
@phatpham514Ай бұрын
So if i buy this NCD do i need to get an auto comb too ?. Or this one will fill up the space inside and distribute at the bottom. So i can replace auto comb ?
@BomboraSuppliesАй бұрын
Hi there, thanks for your message! WDT devices don’t provide top layer distribution, a beneficial factor for preparing your dose prior to tamping. Same as the original NCD, the NCD Pulse provides top layer distribution. Combined with Pulse vibration which settles coffee in the bottom and middle areas of the dose. Providing ‘whole basket distribution’, in one device. As the design allows the vibration to occur whilst you spin the NCD Pulse, the ‘whole basket distribution’ happens simultaneously. Making it fast, and easily repeatable from shot to shot. Some grinders produce excessive ‘clumps’, where large amounts of coffee grounds stick together. When this occurs, a WDT device certainly assists in de-clumping. However, if major clumps are not being produced, NCD Pulse provides enough attention to the middle and lower portions of your dose, removing the need for a second distribution device.
@tomsgrinderlabАй бұрын
Excellent video thank you. Much more information than I was expecting. The presentation was well paced, assumed nothing and fully explained the what, how and why. I have pre-ordered.
@BomboraSuppliesАй бұрын
Hi there, thanks so much for the great feedback! We're excited to have this launched!
@CR-pf1esАй бұрын
didnt give any info as what reading should be- useless video
@halukkrkmzАй бұрын
worst “how to” video ever
@cheflarreeАй бұрын
Metal and paper filters together. Don’t think so. Also 60 grind setting, that is for cold brew. Hope your filters are better than your coffee equipment knowledge. Just saying.
@BomboraSuppliesАй бұрын
Hi there, we really appreciate your feedback! For this brew, we used a paper inside the mesh basket to smooth out the coffee’s flavour profile and minimise fines in the final cup. In our experience, the mesh basket can be used with or without paper in the Breville Precision, depending on preference. You’re absolutely right about the grind size-this was an oversight on our part, and we’ll be correcting it shortly. Thanks again for sharing your thoughts with us; it helps us improve our process!
@BrianBullАй бұрын
oh i;m enjoying lol
@develyntwocentshenderson5739Ай бұрын
how do you start the brew! I created one. how do you start it... nothing on that... nowhere ]
@BomboraSuppliesАй бұрын
Hi! You can view the entire playlist for the Aiden here: kzbin.info/aero/PLf3x_YJ2aWW7naFQjifrYOmABI_D3g2r9
@123dzАй бұрын
Do you have a recipe for ice coffee
@jazzbrew682 ай бұрын
Just what I need to see. I was afraid of trying to clean around the switch but now I see it can safely be done. Thank you!
@thelikotube2 ай бұрын
you made me want to buy it!! Fellow should pay you!! :D
@OneElusiveRainbow2 ай бұрын
is it leak proof?
@BomboraSupplies2 ай бұрын
Hi there. No, but Rocky & Ruby are spill-resistant.
@Ranma12-br3tc2 ай бұрын
is it accurate?
@ЮрийРоманенко-ы8р2 ай бұрын
I really like the appearance, but as the issue of incompatibility and harmfulness of copper contact with food products has been resolved, ready-made coffee is essentially a liquid with an acidic pH. This is often solved by applying a layer of edible tin or silver. But here on the funnel - there is no silver or tin on the inside! How is that possible?
@BomboraSupplies2 ай бұрын
Hi there, the interior of this piece is coated in nickel plating - making this item food safe!
@parthasarathi161082 ай бұрын
How much pressure is needed, is it ok .
@andrewlambert50952 ай бұрын
Love mine. Used daily at work
@kenal15322 ай бұрын
I need flow rate
@rusticitas2 ай бұрын
Oh! Just “dimple” the flat spot. I had been trying increasingly complicated methods that were taking lots of time. 🤦♂️
@applepieclub50123 ай бұрын
where can i purchase this?
@allanm2503 ай бұрын
What hight is the Bruer Scale Dosing Cup.
@BomboraSupplies3 ай бұрын
Hi @allanm250, thank you for your enquiry, the height of the Bruer Scale Dosing Cup is 77.5mm :) Regards
@simonlopez833 ай бұрын
would be nice to see you put a blender on and se how it fits (if, it fits)
@BomboraSupplies3 ай бұрын
Hi @simonlopez83 , Thank you for your message. We have a blender rinser attachment available as an upgrade to our other Rhino Coffee Gear Pitcher Rinser Products here www.bomborasupplies.com.au/rhino-blender-rinser-attachment.html Regards
@TurkiAlshehri-mk5jb3 ай бұрын
Is it good for hot drinks too??
@BomboraSupplies3 ай бұрын
Hi there! The Rocky and Ruby tumblers keep warm drinks warm for up to 3 hours, making it ideal for any season!
@semacomer3 ай бұрын
Ahhh if screwing this thing worked so easy as it looks here…
@erock60405 ай бұрын
Also activate button works as release button?
@BomboraSupplies5 ай бұрын
Hi @erock6040, Yes that is correct, the single button functions for both :)
@erock60405 ай бұрын
Is it rechargeable? How long does it last?
@BomboraSupplies5 ай бұрын
It is rechargeable with USB-C and will last four months of daily use!
@andrewlambert50955 ай бұрын
What stand is that you are using?
@BomboraSupplies5 ай бұрын
Hi @andrewlambert5095, this looks like a white Hario V60 pour-over stand :)
@andrewlambert50955 ай бұрын
@@BomboraSupplies thank you!
@metroplexshot5 ай бұрын
Hi, what if i dont have enough greens to measure the density to get a desired profile, what would be a work around to obtain said desired profile for that coffee
@BomboraSupplies5 ай бұрын
Hi @metroplexshot, could you please email us directly to salesatbomborasupplies.com.au and our customer service team will be able to provide you with a solution. Regards
@BomboraSupplies5 ай бұрын
Hi @metroplexshot If the density tube provided cannot be filled above its capacity and then levelled as per the protocol, accuracy may be affected. That said, there are steps that you can take to lessen the amount of coffee required to achieve the calibration. As a possible solution to your query, we suggest sourcing a container with a similar diameter to the V1 tube with half the capacity. The link V1 tube holds 100 grams of water, and halving this figure will require the tube to be reduced to 50 grams of water capacity. PVC or similar materials are good for this task, as you can add water, mark and cut it with minimal tools. This specific capacity reduction will allow you to conduct the density measurement, and all you have to do is double the weight when entering the data into the app on the V1 setting. Don't hesitate to get in touch with us directly via [email protected] if you need any more help.
@cheesepupusa87166 ай бұрын
Hey, question around what you've said at 1:45 - just got my first neo flex, been getting to figure out how to pull a good shot. When I start pressing, some water always leaks out on the top of the cylinder. I'm not overfilling it (I think), any ideas?
@fleckbot7 ай бұрын
This is the greatest video I have ever viewed.
@Ellifiknow7 ай бұрын
Does it work in outer space?
@jhedokings7 ай бұрын
Does the top knot supposed to be tight? Ours keeps coming loose from time to time.
@BomboraSupplies7 ай бұрын
Hi @jhedokings, Thank you for your message, if you could please send your enquiry to [email protected] one of our customer service representatives will be able to assist you. Kind Regards!
@TC_Prof8 ай бұрын
Great job as always 👍👍
@a.d.e.e.b__8 ай бұрын
My tedious meter seems to be jumping from 70 PPM to 140 when I dip into water but it used to work fine before stayed at one spot. I wasn't given the calibration solution either. What to do?
@BomboraSupplies8 ай бұрын
Hello @a.d.e.e.b__ , Thank you for your enquiry. Is the model you purchased the same as the one shown in the video?
@a.d.e.e.b__8 ай бұрын
@@BomboraSupplies yes it is
@BomboraSupplies8 ай бұрын
@@a.d.e.e.b__ if you could send your enquiry via our contact form bomborasupplies.com.au/contact/ one of our customer service representatives will be able to assist you :)
@ag887718 ай бұрын
Another dumbass video
@littlestar57379 ай бұрын
Does Link have profile or way to set roast level light, medium or dark?
@BomboraSupplies9 ай бұрын
Hi @littlestar5737, You can choose from multiple preset roast profiles, or alternatively, you can create your own. For more information, please visit bomborasupplies.com.au/nucleus-link-coffee-roaster.html
@gabrielgould35499 ай бұрын
How do I get in touch with you guys? I’ve tried the number and email on your website and no one answers.
@BomboraSupplies9 ай бұрын
HI @gabrielgould3549 Sorry about the trouble you are experiencing, if you could send an email to [email protected] we will forward it to the appropriate team.
@Xblankx1329 ай бұрын
Thanks for showing us HOW to use the water tester' appreciate it
@rlb24449 ай бұрын
Why isn't the V2 upgrade available?
@rlb24449 ай бұрын
Where do you go to get the V2 upgrade
@Wolfsoul8710 ай бұрын
What does ppm mean??? I thought we need tds. Are they the same thing are do you have to convert ppm to figure out your tds.
@pruthvit7969 ай бұрын
TDS is total dissolved solids. It is calculated in ppm, it's the unit. Parts per million. Tds is measured in ppm. So when you say 50ppm, it actually means your tds is 50. That's it.
@crowtein844511 ай бұрын
Ads? Really?
@kevinjamiesonbelou11 ай бұрын
Tell me you smoke without telling me you smoke.
@RyanWolfrum Жыл бұрын
Please don't follow this video. There is a critical step missing- flushing the 4FC5-S and not sending the fines directly into the membrane. From the Conserv manual: 3. Locate the quick-connect tee fitting on the 4FC5-S Filter Cartridge head. Remove the plug by pressing in on the collar and pulling out on the plug. Save the plug to be reinstalled later. 4. Cut a length of 3/8" (9.5 mm ) long enough to connect the flush port to a drain. Push one end of the tubing, 5/8"(16 mm), into the quick-connect fitting. The other end is secured at a drain. 5. The power to the Conserv 75E RO System must remain off. Turn the incoming water shut-off to OPEN. Water will flush through the 4FC5-S Cartridge to the drain. 6. Flush the cartridge for five (5) minutes. Then CLOSE the incoming water shut-off valve. 7. Remove the temporary tubing from the flush port. Reinsert the plug that was removed in Step 3.
@aiswaryaarul6936 Жыл бұрын
How to calculate its value
@DanHenrich-h6w Жыл бұрын
Is this a joke? Cause I didn't need this video to find the label, and the label (and the owner's manual) doesn't tell me which filter I need.
@BomboraSupplies Жыл бұрын
Hi, If you know your refrigerator model, you can search for your filter at www.discountfridgefilters.com.au