@@UriLethal i painted it using leather dye matched to my Katskin leather

@@bryantonczyczyn-fb5uz it’s a leather dye from www.seatdoctors.com

@ so is it sprayable or is it wipe on? And you did the door panels and dash Over the plastic also??

@ it’s sprayable and some spots I used a foam roller. There is a high wear clear on top as well which works fantastic, and yes right over prepped plastic. Everything was blue before

@@christophernunez9920 2010 f150 lariat and new Katskin leather

@ looks great 👍

@@joe_moneyy I got matching dye from seatdoctors.com for my katskin leather seats. It’s the exact color as the seats, but a custom mix based on that

@@armaanrijhwani9810 I sell my own short throw kits, and then I just made my own rod to get it through the opening and made a quick knob on my lathe

@@sirridok thanks 🙏

@@guillermocalderon2793 it came with the truck when I bought it. It needs a lot of work and paint but it’s a cool look!

@@jimmysworld3093 thanks!

@@Usaroboticsmm I have a printer too, just haven’t gotten around to drawing them up yet. What info you need for the seats?

@@orkayen probably just an oversight. 😂

@@johnc6466 not much to update yet unfortunately, new engine still being built, paint/body is last for this project. Haven’t done the headliner yet either

@@limitlessbuilds nice man! Some details on the shifter would be great

Who made the bed? I like the bed

@@2bhyman seats were from a 2010 lariat f150, got new katskin leather made up for them. Controls took some figuring out to get it all working for sure. Door panels I dyed them to color match the new leather

Is the center console from the 2010 as well? This looks incredible man

@ yes same truck. Not 100% still but way better than the factory blue bench seats dash and panels!

@@limitlessbuilds great job man, gives me motivation to keep plugging away at my 96.

It’s from a company called Rebco

It was a while ago, but I think I used a website that lets you play around with different lengths and angles and move things around. That gave me the basics, and that’s why I have so much adjustments built in because it might not work well as is. 😂. Lot of reading on the locost forums as well to learn what works and doesn’t

I used Pontiac Solstice knuckles. I think it was rear knuckles on all 4 because the fronts were too large a caliper/rotor

The baffling is to remove air from the oil. The mechanical pump is always sucking oil away from the sump, and always pulling in air as well. If you don’t remove the air, you will end up pumping that through your engine and possibly wreck bearings due to lack of lubrication.

@@limitlessbuilds cheers for the answer :)

They are from a 2010 f150 lariat, but I ordered katskin leather for them

@@limitlessbuilds thanks a lot!!

Definitely will have a matching boot. Just trying to figure out how to attach it nicely

Came with the truck, but apparently someone in BC Canada still makes them

I’d argue against that since I had those before I did the swap.

@limitlessbuilds maybe we have different seats then lol

@@CHEESESLICER96 yeah I’m sure a lot of factors in play. My factory seats were maybe wore out too

I’m getting one made with the he same leather and stitching as the seats. Needs to match up, just been too busy. Haha

Yes, originally had a bench seat. These are newer f150 seats with new katskin leather

Thanks!

I put it he switches on the side of the seats. That way the lights don’t distract when driving

@@limitlessbuilds were you able to use the factory connector from the obs?

@@dontknowdad4039 mine was all manual everything before, so I wired it up myself.

@limitlessbuilds thanks! Looking to do a swap myself and my truck has power lumbar only. I'm thinking I should be able to wire the new seats to the existing wiring.

@@dontknowdad4039 depends on the amperage draw I suppose. Pretty easy to wire yourself if it keeps blowing fuses anyway

Factory units I dyed myself.

I didn’t film it as I was limited on time. It’s my daily driver so can’t be down that long. Haha

@@limitlessbuilds What year console did you use for this?

@ same as seats, 2010 I believe?

All the plastic is old stuff I dyed using leather dye actually. Asked them to match the new leather I got

​@@limitlessbuildsdamn you used leather dye on the plastics? And it's holding up? I gotta get rid of this horrid blue but hate how paint fails on plastics..even the sem shif designed for it don't hold up much better. Where did you source the dye bro? Tight work!

Thanks!

They came from a f150 lariat, but then I got new katskin leathers

I converted to power everything. Was tired of the manual locks mostly