Militiamasks

Пікірлер

@thefatduck5598 4 күн бұрын

Bendix actually used to make mainframes in the 50's.

@DustinTalbot1 4 күн бұрын

Why :((((( This hurt to watch

@DustinTalbot1 4 күн бұрын

I couldn’t possibly unseal any of my masks

@WeaponsMilitaryDude_Rebooted 7 күн бұрын

where is the audio

@baronsgasmasks 7 күн бұрын

@@WeaponsMilitaryDude_Rebooted I removed it because it was horrible to listen to sped up

@davidbaker5918 11 күн бұрын

The Bendix item is a pen-style dosimeter and is not an atropine injector. Dosimeters are used to record a person’s accumulated radiation dose in a radiologically contaminated environment and would usually be clipped onto the person’s clothing. Your style of dosimeter is reusable and can be recharged after use by using a dosimeter charger. You can read the dosage on your dosimeter by looking through the lens on the end nearest the pocket clip and pointing it at a light source. You should see a hairline along a scale which would indicate the dose of radiation the wearer was exposed to. The line may not be at zero or may not be visible at all as they tend to drift overtime. Bendix was an American aviation company, but they also made countless other products which included radiation detection equipment like your dosimeter. Many different organizations and countries utilized their radiation detection products including the US Office of Civil Defense.

@baronsgasmasks 10 күн бұрын

@davidbaker5918 Ah that certainly makes quite a bit more sense than an atropine injector. Thank you for the correction, I am not sure why I was told it was an Atropine injector

@WeaponsMilitaryDude_Rebooted 11 күн бұрын

light anti gas masks are my favourite

@DustinTalbot1 12 күн бұрын

How would you wash one of these?(due to the comm systems in the mask)

@DustinTalbot1 12 күн бұрын

And disassemble it

@baronsgasmasks 12 күн бұрын

For the Aircrew and Tank series you should only wipe it down with a wet wipe and treat it with Sillicone spray, don't wash it

@Czechgasmaskguy 18 күн бұрын

in 1980s they didn´t use co 1 but cm3 and cm4. co 1 were made in 1950´s and around 1970´s were upgraded to co1/r . I also want to say om2020 isn´t used by czech army know and the cm6 is in use by 31. rchbo (czech cbrn unit) in small numbers

@NureinFeigling 24 күн бұрын

Appears me, you, and gl88 bought a converted m40 from the same seller lol. Love the m40 mask, but I'm still an m17 fan boy. great video! Been binge watching your content here lately lol.

@WeaponsMilitaryDude_Rebooted 25 күн бұрын

the first non American mask I’ve seen on this channel

@kingofthetigers 26 күн бұрын

M8 chill out. Its not that deep.

@baronsgasmasks 25 күн бұрын

@kingofthetigers This is an informative video, I was poking fun at people who seem to think it's impossible to change the filters.

@Sam-qd1jq 27 күн бұрын

I got the same protexall mask without a diaphragm, your video is the only similar model i’ve found from ALF. Mine is unfortunately missing the head straps but came with the correct type N canister

@baronsgasmasks 25 күн бұрын

@Sam-qd1jq American LaFrance marketed many masks such as the Experimental Akron Tissot, Burrell gas mask with both the Kops Type and Improved Kops Type facepiece, Davis 3020, All Vision, and a few other masks iirc. Another collector named Botstowo has/had another example of the pre-cleartone Diaphragm All Vision

@psychogopher7894 27 күн бұрын

Why would you make a video about conservation when you "don't care enough" because the masks are "already falling apart." The whole point of conservation is to slow down degradation so these historical items can be preserved into the future. Ripping the rubber out with an old T-shirt seems counterproductive to that end, no? Why not just wait until you have the proper materials, rather than cause damage.

@baronsgasmasks 27 күн бұрын

@psychogopher7894 The "don't care enough" was more or less a joke. I care quite a lot about preserving these masks, this is just an example where I have not had the time to switch out the shirt with packing paper, I did not damage the mask by pulling the shirt out and more than it already was. The rubber and fabric on this mask are extremely pliable yet very gummy so it allows slightly less care, though I do usually treat these with the same care as any other World War 1 Era mask I happen to own. I am sorry if I came off as dismissive to the preservation of these masks, this video is meant to be informative.

@ZacharyCornes 28 күн бұрын

would you say its worth it to buy a original gm17?

@baronsgasmasks 28 күн бұрын

@@ZacharyCornes Only if it's less than $600 tbh

@ZacharyCornes 28 күн бұрын

@@baronsgasmasks yea thers one on ebay rn for like 640 pounds idk what that is in dollar but its definatly more

@JudeClem-s8v 28 күн бұрын

Very helpful tutorial thanks (by the way I was the redditor lol)

@ZacharyCornes 28 күн бұрын

Is it cause it’s a tf1 not a gp5

@baronsgasmasks 28 күн бұрын

Hell nah I'd never buy another GP-5, it's just because the dude packed it like it was gonna run away

@ZacharyCornes 28 күн бұрын

@@baronsgasmasks oh my bad lol they do overpack tho

@DustinTalbot1 29 күн бұрын

So real

@Andrei9thouzen Ай бұрын

i want one of these but i dont think its really possible....

@baronsgasmasks Ай бұрын

I mean hey, IncenseDragon got one in the UK, so anything is possible

@raitis9928 Ай бұрын

Vef

@DustinTalbot1 Ай бұрын

Hey I have a mint condition m2a2 do you think it would be okay if I put silicon spray on it? If so is there anything I should do?

@baronsgasmasks Ай бұрын

@DustinTalbot1 Sillicone spray is fine, that's what I use on these

@renatohirata4290 2 ай бұрын

why no s10s or fm12s or fm53?

@baronsgasmasks 2 ай бұрын

@renatohirata4290 Bold of you to assume I can afford an FM53 lmao. But honestly I have been thinking about getting an S10 or FM12

@renatohirata4290 2 ай бұрын

@baronsgasmasks actually i've seen some cheap fm53s on eBay, even making me indecise Weather to get a fm12 or a fm53

@Jake_Fish_pleb 2 ай бұрын

Can you make a video on the canadian C4 CBRN gas mask?

@baronsgasmasks 2 ай бұрын

@Jake_Fish_pleb Unfortunately I do not own a C4, once I am able to afford one I will definitely do a video on it

@DondePete 2 ай бұрын

This video will go viral!

@DondePete 2 ай бұрын

What do you use to clean the oily stuff off of them? I bought a really old mask, im scared to put anything on it.

@baronsgasmasks 2 ай бұрын

@@DondePete I use Trident brand food grade Sillicone spray

@DondePete 2 ай бұрын

@baronsgasmasks Would you recommend this on the lens too? It's almost like the anti fog lens rusted or something and made the actual lens yucky. I don't want to scratch. Or ruin..

@botstowo 2 ай бұрын

That’s just another type of postwar industrial filter. It’s a mismatched kit. Sometimes you see masks like this where a collector some time ago saw that the canisters are almost identical and needed one for a mask that didn’t have one. It’s definitely not an industrialized CE. That harness is normal.

@rotwurk3862 2 ай бұрын

do you collect other surplus, like BDU's or equipment? and why did you get so interested in gas masks?

@baronsgasmasks 2 ай бұрын

@rotwurk3862 Not at the moment no, I only collect Chemical warfare equipment. For the reason I started, it was all due to my weird obsession with Communism like 6 years ago, which led to me getting my first GP-5 mask in 2019

@rotwurk3862 2 ай бұрын

@@baronsgasmasks my overall collection is still decently small, and is mostly BDU's but ive always loved gas masks. i mostly got into gas masks because of how cool they looked, and always wanted one that looked like the cartoon concept of a gas mask, like the gm30 but more straight

@Asbestdeparting24 2 ай бұрын

@@baronsgasmasksavg gas mask story

@Boris_Din_Dietrich__Hazim 2 ай бұрын

Why no Chinese masks? 🙁

@baronsgasmasks 2 ай бұрын

@@Boris_Din_Dietrich__Hazim Too many US masks...No room for China 😔

@DustinTalbot1 28 күн бұрын

@@baronsgasmasks based

@DustinTalbot1 2 ай бұрын

Here I am with only 4 m17s

@shizo_bioc80022 2 ай бұрын

It says at night these mask turns alive and start singing

@Boris_Din_Dietrich__Hazim 2 ай бұрын

I hope they're not singing K-pop

@shizo_bioc80022 2 ай бұрын

@@Boris_Din_Dietrich__Hazim SABATON only

@usernamehhhs4540 2 ай бұрын

How can I contact you?

@baronsgasmasks 2 ай бұрын

@@usernamehhhs4540 message me on Instagram at Baronsmilitarymasks

@long_chin_man 2 ай бұрын

BRITISH EMPIRE MENTIONED !!!!🇬🇧🗣🔊🇬🇧🔥🔥🇬🇧🔥🔥🔥🇬🇧🇬🇧 WHAT THE FUCK IS A SUNSET?????????????????

@bogstrider0009 2 ай бұрын

Cool dude!

@rotwurk3862 2 ай бұрын

also your videos are nice, your voice is calming and the buzz of the lights is nice.

@rotwurk3862 2 ай бұрын

i have one of these, my first mask. good condition but a little small for me. i also got it for a pretty bad price, like 60 - 70 USD i believe.

@baronsgasmasks 2 ай бұрын

@rotwurk3862 that's actually a really good price if what you have is actually a Dräger Simplex

@rotwurk3862 2 ай бұрын

@@baronsgasmasks i dont quite remember, maybe somewhere closer to 90. do you have any plans on your next gas mask? i don't think ill get one, but im interested in the Auer Z56

@baronsgasmasks 2 ай бұрын

@rotwurk3862 Well, to buy new masks I have to sell some, but I have not sold a single mask since early November, but if I did have the money I'd get a 1950s modified Training M3A1 Diaphragm Mask

@notarussianspy762 2 ай бұрын

whats better in your opinion? the israeli 4a1 or drager simplex (i wanted to comment this and i cant watch the vid rn so sorry if you say it in the vid)

@baronsgasmasks 2 ай бұрын

@@notarussianspy762 I'd personally say the Model 4 is better due to it being generally an upgraded model

@notarussianspy762 2 ай бұрын

@@baronsgasmasks Danke!

@WeaponsMilitaryDude_Rebooted 2 ай бұрын

Nice, my first mask was actually a Drager Simplex i got for pretty cheap i mistook for a israeli mask

@baronsgasmasks 2 ай бұрын

@WeaponsMilitaryDude_Rebooted oh wow you actually do! That is very cool

@WeaponsMilitaryDude_Rebooted 2 ай бұрын

@ And i mislabelled it as a M4 like you said in this video people mislabel it as if you’re refering to the video i made on it, the photos of M4s stamps looked a lot like Drager stamps so i assumed its from Drager What is it with my responses and it not having the username by the @ thing

@rotwurk3862 2 ай бұрын

same, but i knew it was german.

@LatRedObzor 2 ай бұрын

Scott aviation - S A M I don't know about M word

@FrogZoro 3 ай бұрын

Nice 👍

@DustinTalbot1 3 ай бұрын

I own four m17s and I’m planning on getting an m40 soon

@NitrousBreather 3 ай бұрын

I’m in the UK and it’s so difficult to get a M17 an M40 but I want them so much

@tonytime_gaming1921 3 ай бұрын

I want one of these so bad

@Nah-r2l 3 ай бұрын

I really do like the GP-4u but with the grey? Less iconic but grey just slaps different.

@DustinTalbot1 3 ай бұрын

I saw this on Reddit I think

@botstowo 3 ай бұрын

It’s not that hard to be nice.

@gasmaskery 3 ай бұрын

Yep, not fond of the passive aggressivness

@botstowo 3 ай бұрын

@@gasmaskery there’s so much nastiness in this community. Lord knows I’ve contributed to it plenty. I just wish it would stop.

@Andrei9thouzen 3 ай бұрын

I wish I had a small m17a1.....

@Boris_Din_Dietrich__Hazim 3 ай бұрын

I have two of them. Good design, but age isn't forgiving for both of them

Ең жақсы KZbin

Пікірлер