Great video, thanks for sharing. I will definetly be using this when I install ours. Quick question though, how did you attach the tank to the trailer? Since you had to use a bigger door, I have the same issue and have to order a bigger door and I am concerned that the tank will be sitting loose in the hole. I did not see anything in the video that showed how you secured the tank to the trailer. Thank you

I get it that its connected to your hotspot...but if the power goes out, doesn't the hotspot go out as well or is the hotspot battery power?

Thank you so much for sharing! I was directed to your video via a Facebook group where I posted asking for help. I cannot thank you enough because I have a refrigerator full of food. I did not want to spoil.🎉

Nice !

I like to know how much propane Truma use.Let say a 30gal tank how long it last?

thank you. you made this so easy.

Gotta be sure to put the caulk in the crack and maybe the caulk in the hole too for good measure. Can't have leaky holes and cracks, gotta shove the caulk in there mmmhmm.

Dude, it took you forever to finally get to the tutorial. WAY too much BS. After 7 minutes of you bitching about the wiring and the burnt plastic, I had to find another video.

Rv roofs leak befor they are put on

Hasn’t been 110/220 in years.

Great video sir! I have used lap sealant yearly but just ordered Eternabond as extra insurance. Question: are not all RV rooves pitched so as the water flows down to the gutter from the center making the roof not actually flat? At least my TT Connect is built that way? Take away from your video is inspect...clean...inspect...clean. Thanks and great repair.

Thank you please keep me updated

Thank you that fix my refrigerator I just bought this used motorhome and it worked when I was up at the RV place but when I got home it would not work and it was blinking them codes thank you so much

This happened to me just after washing my coach. I used a gun magnet to fix the problem after paying $45 to a rv mechanic on Just ask. The info he gave me was useless. I turned to KZbin to fix the problem.

Is it safe to use on leaf spring suspension?

Why not just replace the bulbs?

We just did and it worked!! Thanks so much and I just subscribed to your channel!

Does anyone know if after doing this it takes a while for the fridge to kick on or should it start cooling right away ? My TT sits at a campground and i leave the fridge on when i go away for a short while. When i came back the fridge had the L1 Op error. I was able to do the magnet trick and the error went away . I left the fridge on for about 20 minutes and it did not kick on The fridge did not kick on ! The silver tube thing to the far right, i think it`s called the Boiler Housing was hot to the touch. Maybe this has to cool down first ! Any info or suggestion's would be appreciated.

I wanted an RV box that had the knockout on the back and ordered the one you listed. It isn't the same, I should have checked before ordering.

It’s nothing less than amazing that not only do these types of serious issues come up on such a new coach, but the fact that there’s only a 1 year warranty on most of them is downright appalling, given the cost of them! I just started a new career in the RV tech industry(mistake #1😅)and I’m already horrified at the poor build quality and building practices in this industry. I got into it so I’d know more how they work because I just bought an older one. I don’t think I could ever buy a new one, even if money was no object, I’d rather have an older one for much cheaper that all the issues have been identified and dealt with.

Is there a way to replace just the handle and rod? This was you don't have to cut up your underbelly.

The Romex pulls right out of the back of the old, damaged receptacle as you see in the video. But I'm not understanding how to get the wires snapped down into place inside the new one. I laid them down where they go and tried to snap the back of the plug into place, basically forcing the wires into place. The ground wire is snapped in but I can't get the black and white to snap in, even after I stripped them. Any advice?

Thank you, I succeeded . Same thing happened with mine , the corners broke off . Very cheap thin plastic .

Thank you for your video. I told my husband there had to be a way to fill the water tank on this new trailer while boondocking.

thanks guys !

Where does the water go when you use the relief valve?

Use isalation instead of The Pink panther

I always start out putting about 5 gallon of water in my black tank then put my treatment in and had no trouble.then while using the toliet we fill up the bowl twice and dump it every time we go to the bathroom

Just purchased a Kingriver Model off Amazon. It looks exactly the same. Might be the same manufacturer with a different label. Installed it in a Forest River travel trailer. Had a Dometic 6 gallon prior. DC wiring advice. Mine has 3 wires like most . Red was my hot. I also used a cheap $7 circuit tester to assure it was the correct one. Green was my common. I initially connected the blue, but got no power. Switched to the Green and it started right up. How this helps someone. Cut and capped the blue wire to avoid any contact

I'm curious about the application. Is it better to apply it directly to the wood? I would think that applying it to the membrane would be much weaker since there could be adhesion issues with the original material.

Good video. I’m using your link below to buy it.

Going to an outside receptacle you don't have to use a GFCI breaker?

Nice video!! Love it there been there a few times, in 2022 we did three weeks there. How do you like the power stroke diesel?? Have u had any emission issues with it ?? Thanks

Good job, enjoy your camper!

So, if the pressure relief valve is ever activated the water just goes on the floor behind the water heater? What actually secures the heater itself in place? I only saw you screw the door cover into place.

wow just got my rv for a great price i have to get the roof redone. i hope i can afford it lol. gonna see if i get a quote. but Definity want to get this done. gonna remodel the inside

We saw you guys driving in Georgia I was in a white ford explorer in between 2 gray for explorers

Thank you sir!

Got my Fogatti heater. Now I'm looking for parts to do the pressure relief. I got the pressure valve and back pressure fitting off your link at Amazon. Now looking for brass nipple, 3/4" to 1/2" adapter and "T". The brass is freaking expensive. Why does it have to be brass? Will galvanized steel be ok?

Great Video doing mine now

Love this!!! well done

Michigan is an awesome place to visit Go Green Bay Nice team Richie

Whoa! Great Idea Thanks You make it look so easy to install This will help alot

Hey Yall we are in Savannah come visit! nice to see Sandy in the videos and Skye and sophia

Watching your video when you were going out for a drive having the video directly on the hitch I see that you lost you're cool Square Drive that locks the Stinger on you left it on the back bumper you can hear it Go pinging off on the tar on the road

👍👍👍👍👍

Hi Mike

I wonder why they dont include the pressure relief valve in the Fogotti like they do with the tanked water heater.

New subscriber!!!

Hey you did really good on this it did help me install mine I got it fixed however I was going to ask you if you could tell me what part number was the old control knob box that turned on and off manually because I'm trying to install one in the bedroom in my camper I need to buy one like the one you took out