For this seat cover how many yard you bought?

Very helpful, now i’ll go and check mine,, same code..

What size socket?

Thank you brother.

Looks horrible

any codes

Agree, definitely worth the saving.

Did you put the dust cover back over the cylinder, if so, how did you hold that in??

1:16 - 1:46 video freezes.

just got this installed on my 2023 mazda 3 turbo. and it sounds amazing however my issue is the driver side exhaust is almost resting on the bumper and passenger side is perfect.. anyone having this issue?

You should use lock stich screws mutch better repair

Pharaoh Squad ❤️‍🔥💪🏽 thank you for the video

Great I have the same truck and fuse 42 was blown. Thanks alot

Thank you!

Isn't that still leaking

so helpful! great video

Isn’t the rotor on with the slots going in the wrong direction?

I have OMC Cobra 3.0 and i have the same problem. The difference is that the first owner soldered it with inox soldering. Tomorrow i’ll try with friend of me that have the same epoxy . Hope it will help.

To remove that bolt, remove the passenger side engine mount. Then jack your engine up. Peace of cake, there are 3 bolts only.

Mix a little resin into the bondo. It makes it like cream and it spreads smooth.

It's not hard to just take the 3 bolts out of top of strut so it can move around.....and u can still jack it up. Or down from bottom....just leave bottom bolt in strut

Keep having to come back coz I’ll never remember how to do this

HAHAHA THANKS BRO 😅

Is this the same for all cars? Or are there makes and models that are far less time consuming when it comes to replacing parts like this?

Thanks, dude!

Solved... No need to take it all apart on the module remove the T20 screws without taking module out just fender liner then the 2 posts that put the 12 volts to the motor it might look like a good connection but it's not just get some plyers and squeeze together a little better then cycle the brake off then on then off and lights in dash will stay off.

Just changed my lights. Thank you for the quick, easy, simple video

l myself would have checked fuses first

Awesome, great video.

Thanks 🙏👍🏻

I have the same problem with my 2010 Hyundai Sonata when they make that noise it not dangerous to drive but should be replaced correct?

Will this work on a 2013?

Where are the jack stands?

Hey is this the same fuse position as a 2006 ford f150 because my right side brake and turn signal are not working

Thank you. You saved me some $$

Perfect. This is the video I was looking for, informative and very easy to follow. Thank you.

I’ve got the same issue on my merc 228. Did you drill all the way through the block for the holes at the end of the crack? Thanks, hope the repair is holding up for you!

Top notch video, l liked the way you explained yourself as well other tips that were very useful, thank you much. I watched 4 videos on this subject and found yours to be hands down the best. You remind me of my father in this way of what is a good manor with respect to your viewers. Take care my dear good man thanks for sharing, Thomas.

I have never understood hoe the Wonky Parking Brake Cable on GMs work, as it appears the Cable from the Pedal/Actuator goes all the way to One Brake Assembly, and another Cable seems to hang around the Casing of the First One, but there is no Connection to transfer the Application of the brake to the 2nd Cable. It made no Sense on my 81 Olds, 86 Cadillac, 94 & 95 Buick Roadmasters, or on my 95 Fleetwood. My XT5 is even goofier, with some kind of Solenoid on the Rear Calipers. In the past 40 yrs, I think I can count the Number of Times I have used the Parking Brake on One Hand

Thank you

How deep do you drill the holes do you drill all the way threw

Great video, thanks. Is it possible to use a traditional paper filter with this? Would like to keep my engine clean and the K&N style filters do not do a good job at filtering.

You are great at explaining what's going on. Thumbs up

The stupidest video I always saw on the whole internet 🛜

I replaced my drive shaft as well but now when I get up to 50-55 mph my truck starts vibrating. I got the adjustable one from Rockauto

Exclent work 👍👍👌

Is that thing glued to the floor or does it screw out?

Sounds good, I'm considering this kit for my 17 mazda 6 gt.

That rotar man.. the rotar!!

good work👍👍😍