The intention of the bucket is to catch the lint. Once filled with water it will draw the lint into the bucket itself, no need for an additional filter. It would not be advised to attach panty hose directly to the duct as the duct can become quite hot and panty hose is made of nylon
@llNATEDOGGll5 күн бұрын
I tighten the clamp on the back of the dryer and it can easily be pulled off.
@DundasJafineInc3 күн бұрын
Is it the semi-rigid duct that you attached to the back of our dryer? What type of clamp are you trying to use to tighten this duct to the dryer exhaust port?
@elmeralvarado2395Ай бұрын
where can I buy the entire kit?
@DundasJafineIncАй бұрын
Please indicate where you are located and we can recommend locations that sell this product in your area
@EJfromNYC3 ай бұрын
and how do you connect the smooth metal pipe to this in the sofft??????? you would sell more if you included an installation video...
@lothianmcadam13 ай бұрын
This product lacks a gasket between mating surfaces. As a direct result of no seal, the connector, wall, floor and immediate surroundings become inundated with dryer lint.
@DundasJafineInc3 ай бұрын
Thank you for your feedback on this product. We are currently updating this product and the new version will have a gasket included for a nice solid seal. Look for this new product to hit shelves later in 2024.
@lothianmcadam13 ай бұрын
This product lacks a gasket between mating surfaces. As a direct result of no seal, the connector, wall, floor and immediate surroundings become inundated with dryer lint.
@latersheroams4 ай бұрын
I can feel air coming out the side of my adapter and I’ve changed it twice. I don’t know what to do from here.
@Ryder214_1Ай бұрын
Same issue I’m having. Did you find a solution?
@latersheroamsАй бұрын
@@Ryder214_1 Unfortunately no. I even use the HVAC tape around it in various places. I've spent a lot of money trying to fix this. I'm going to have to hire someone to resolve this.
@paulkelly42024 ай бұрын
do not do this at home. It is not recommended by professionals. Only by salesman
@johnwake91725 ай бұрын
Why is it not intended for a gas dryer ?
@DundasJafineInc5 ай бұрын
Hello and thank you for your question. This product is not intended for gas dyers due to the possibility of a Carbon monoxide leak. This product will not completely seal out these types of possible fumes, and therefore it was deemed safe only for electric dryer use.
@johnwake91725 ай бұрын
Thanks !
@dhinkes91845 ай бұрын
When I need to clean out my dryer vent tubing, will I be able to get past the vent blocker? I currently use the brush with extension rods that goes on my drill and is inserted into the dryer vent from the outside of my house.
@DundasJafineInc5 ай бұрын
Hello and thank you for your question. You will be not be able to use the cleaning brush from the outside of your house as the draft blocker will not allow the brush to go past where it is attached. our recommendation would be to remove the draft blocker from inside the house before using the brush to clean out the vent. Once finished, simply reattach the draft blocker.
@corpvideo5 ай бұрын
Great Video, easy to understand and products are well thought out in design and application.
@DundasJafineInc5 ай бұрын
Thank you for the great feedback. We are glad that the videos are helpful and easy to understand.
@gutsultv6 ай бұрын
The trap door is not sealed, so I have dust all over the basement, and it doesn't matter how clean the filter is. I don't recommend it if you don't like dust everywhere.
@DundasJafineInc6 ай бұрын
Hi there, Sorry for your experience. Could you reach out to someone in our Product Developments Department directly? We may be able to help you with this issue. Email: [email protected]
@HeadingForTomorrow6 ай бұрын
The duct you show is not the same type of duck you install later (semi-rigid vs more flexible type).
@michaelrussell30997 ай бұрын
What size screws do i need for this? And how long.
@DundasJafineInc6 ай бұрын
Hello and thank you for your question. We recommend #10 screws - 1in. to 1&1/2in. in length.
@angiejester28807 ай бұрын
⁰😅
@JavaMava7 ай бұрын
Can't get the top part secured. The weight of the exhaust pipe pulls it out. Tightening further causes both the elbow and the exhaust pipe to crimple.
@mugsford7 ай бұрын
Is there any way to order spare parts? The hinge tabs on the clear plastic door broke off and I'd like to replace that part.
@DundasJafineInc7 ай бұрын
Hello and thank you for your comment. We are very sorry to hear that this has happened to your ProClean Dryer Duct Lint Trap. Please email me your address to: rhollaman@dundasjafine and I will send you out the part you need to fix it.
@mugsford7 ай бұрын
@@DundasJafineInc Received a replacement part for this today, thanks so much for an easy repair without drama!
@DundasJafineInc7 ай бұрын
You are very welcome. Glad we could help out with the replacement part.@@mugsford
@rebeccarivas4208 ай бұрын
How do you shorten this? My dryer doesn’t move back all the way.
@roberthollaman45278 ай бұрын
You can shorten the duct by using tin snips to cut it to the proper length. Make sure to wear gloves to protect your hands when doing this.
@rebeccarivas4208 ай бұрын
Thank you!
@johnlifflander8 ай бұрын
Where can I buy this - can't find it anywhere
@DundasJafineInc8 ай бұрын
The ProClean Dryer Duct is available at all Home Depot stores. You can also check our website - www.dundasjafineom and click on the "Where to buy" section to find your closest store.
@dm1960972110 ай бұрын
Great product. I just installed this on my vent. It was easy to apply and the vent veins worked great....I would gladly pay more for a better gasket sealing system. The pre-measured gasket fits perfectly but you only need one and end up throwing the other 2 away. I also wish the gaskets were more dense as they are only weather proof, not water proof.........these gaskets are essentially foam and will eventually saturate with water. None the less an easy product to install.
@eastwoodben110 ай бұрын
pity its only one size
@stevensawicki82411 ай бұрын
You need to be more current with your product line. This was over a year ago surely there are other videos you can make for your consumer ? And yes I am one of them.
@roberthollaman452711 ай бұрын
Hello @stevensawicki824, and thank you for your feedback. I assure you the current video and it’s installation process are current and this product and it’s design are a best seller in the market today. We will be launching new videos later this year and we appreciate the feedback.
@underedenxx11 ай бұрын
Can this be installed on an angle?
@roberthollaman452711 ай бұрын
Hello and thank you for your question regarding our Space Saver Aluminum Dryer Duct… this product can be installed on an angle.
@underedenxx11 ай бұрын
@roberthollaman4527 thank you for the response. I appreciate it 🙏
@chrisp5227 Жыл бұрын
I recently installed this in my soffit and the door remains open after the dryer stops. Kind of a pain to have to go out and close it manually with a 30' pole each time. Is it defective? Do you have any suggestions?
@DundasJafineInc Жыл бұрын
Hello and thank you for your question regarding our soffit dryer vent. Your installed product may very well be defective and if this is the case, will need to be replaced. While we strive to produce perfect working products, there are times when the product does not perform as it should. Please return it to the store where you bought it for an exchange or refund.
@travisdewar8048 Жыл бұрын
I have one of these I noticed the 4” dryer vent hose is almost too small to connect on the inside when I try screwing it on. Not sure if it’s the right size or not anyone know ?
@DundasJafineInc Жыл бұрын
Hello and thank you for your question Recessed Dyer Vent Box. The Recessed Dyer Vent Box was designed to accept the 4 in. dryer vent hose. It may take a little bit of adjusting to make it fit properly to the adapter, but the 4 in. dryer vent hose is the proper size for this product.
@nsmall777 Жыл бұрын
I can't get my elbow to go over the dryer vent. Both are 4" and are the same exact size apparently so the elbow won't slide over the vent like this video. 😥
@DundasJafineInc Жыл бұрын
Sorry to hear about about your Dryer to Duct fitting issues. This product was designed to fit over a 4" dryer flange. We suggest you return this product back to the store that you purchased it from for a full refund.
@wayneguy6043 Жыл бұрын
Horrible
@vernonthompson5236 Жыл бұрын
Works great for exhausting above ...but what about when the line just goes straight outside when not in a basement?
@DundasJafineInc Жыл бұрын
Hi Vernon. Thank you for your question. I believe you may have a second floor laundry in which case the duct goes directly out through the floor below (to an exiting ductwork) or out through the wall. In which case, this product will not work for those types of applications solely due to the short length of the duct itself. This product is works for ductwork exiting from above so you have the room to mount the product slightly above the dryer so you have access to the unit in order to clean the screen after every dryer cycle.
@YOZOYMANUEL Жыл бұрын
Where can I buy one???
@DundasJafineInc Жыл бұрын
They are sold at Home Depot
@bobmanwhy Жыл бұрын
WOW
@kathleengierhart612 Жыл бұрын
How do you pull the dryer out if you cannot expand the connection?
@DundasJafineInc Жыл бұрын
As with all hard pipe installations, you would need to loosen the clamp and disconnect the duct from the dryer or the wall before being able to pull the dryer away from the wall
@kapowyadao Жыл бұрын
I did exactly as instructed but a lot of water and moisture accumulated around the floor of the round canister.
@DundasJafineInc Жыл бұрын
Thanks for your feedback on this product. Condensation will build up from time to time due to the water and heat mixing. Adding to much water to the cannister can also cause moisture accumulation.
@ankitdarda Жыл бұрын
Is this product meets with building code compliance while installing in condominium?
@DundasJafineInc Жыл бұрын
Indoor dryer venting in general will never meet code as building codes require a dryer to be vented outdoors. This product provides an option for those instances where outdoor venting is not possible. Also, this product should only ever be used with electric dryers and not gas dryers.
@dalillasantos7332 Жыл бұрын
I don't believe that it's needed to comply with building code because doesn't affect any aspect of the building. The only thing it is needed is a professional electrician to switch the current voltage to 250 watts.
@kempatsu2205 Жыл бұрын
What about vents that are on the wall but against the ground too? (Where the wall meets the floor)
@ricardomaningas8442 Жыл бұрын
Paano Maka order
@1232bluejays Жыл бұрын
Does this really work we have a leak probably because the outside flapper vent never completely closes.
@kb_100 Жыл бұрын
Can this be installed vertically rather than horizontally? I bought one but I have rigid ducts and can only install this after an elbow that comes out of the foundation wall and down to the laundry room.
@DundasJafineInc Жыл бұрын
I can not commit on the reason for the leak but as far as this product goes, It definitely prevents backdraft and cold air from flowing back into your vent and vented space,
@Ryan-yi5ro Жыл бұрын
No metal screen to keep out birds?
@DundasJafineInc Жыл бұрын
None of our products contain a metal screen. On the 5" and larger versions there is a built in plastic pest screen behind the cap to prevents pests from entering. This would be a fire hazard on 4" caps used for dryer venting purposes as lint could build up on the screen. We do offer 4" products with a removeable and cleanable pest screen but this product is not one of them.
@kb_100 Жыл бұрын
My vent pipe to the exterior is inside my finished ceiling and not accessible. Can this device be installed immediately at the dryer outlet instead? Or will the plastic melt?
@DundasJafineInc Жыл бұрын
This product should not be attached directly to the dryer exhaust port
@kb_100 Жыл бұрын
@@DundasJafineInc didn't think so. Thanks for your response.
@dcolum23 Жыл бұрын
The defuser gets pushed out of the flange and falls on the ground literally every single time the furnace turns on. The air pushes it out so easily.
@kimandimmidna2066 Жыл бұрын
Bend the metal tabs out to have more tension.
@rhodawalker3554 Жыл бұрын
Can I install the box in the "upside down" position?
@DundasJafineInc Жыл бұрын
If you plan on installing it upside down please ensure the backdraft damper is removed before installation (if included with your plastic box). This damper will not function properly if the box is in the upside down position
@Mattg1616 Жыл бұрын
could it be installed sideways?
@stacymontgomery300 Жыл бұрын
Wondering the same thing
@jshlnd14 Жыл бұрын
Sure can.
@meincotu Жыл бұрын
If the surrounding soffit is vented to keep the attic air clean and dry the moisture from this vent, servicing a bathroom or clothes dryer, could allow moist air to be sucked into the attic and promote mold growth. Study the air flow.
@DundasJafineInc Жыл бұрын
This product is only to be used on solid soffits as shown in the video. It should not be used on perforated soffits for the exact reason you have indicted in your comment.
@fkady9664 Жыл бұрын
To pass code you need to block any adjusent soffit vents 3 ft away on both sides. That's all.
@10Eighthomeinspections Жыл бұрын
@@DundasJafineInc your video literally starts with the vent on vented soffits....might want to hire a new video guy..🤷♂
@lach0125 Жыл бұрын
the damper keeps falling out of my unit from the air pressure
@DundasJafineInc Жыл бұрын
What sort of appliance do you have this hooked up to and how many CFMs is this appliance releasing in air pressure?
@lach0125 Жыл бұрын
@@DundasJafineInc I'm using this as a ceiling mounted air vent for my furnace. Not sure what the CFM is
@DundasJafineInc Жыл бұрын
@@lach0125 It is fine to be used for this purpose and there should be no issues. I'm not sure how the center damper is falling out as there is a threaded screw that holds this in place. Pease send photos so we can get a clearer visual of how this is occurring - [email protected]
@lach0125 Жыл бұрын
@@DundasJafineInc Sent. Thanks for the response
@dcolum23 Жыл бұрын
@@DundasJafineInc The center isn't falling out ... the entire defuser falls out because the metal clips don't have nearly enough pressure to keep in within the flange. I've tried double-sided tape all along the flange, but that was just as useless.
@jonathanparag6299 Жыл бұрын
This product is terrible
@Elena-mk6bf2 жыл бұрын
Can this product be modified to use it as a manual backdraft damper? Do you have another plate I can put inside to stop the hot air from coming inside the cold dryer when it's not in use during hot Florida summer, causing heavy condensation in the dryer? I wouldn't mind replacing such plate with your filter before drying of each load of laundry and switching them again after the dryer was used as it would save my dryer from condensation which happens only during July - September. I don't want to use the butterfly kind of backdraft damper as I didn't find a single one of them that would be highly rated - they all malfunction.
@DundasJafineInc2 жыл бұрын
We don't sell any plastic plates that could be retrofitted into this product and used for the application you're thinking about
@mugsford7 ай бұрын
They do make a diverter that opens to allow hot air from the dryer into the room, so you could use that to block outside air and open it whenever you have to run a load.
@AD177092 жыл бұрын
Other than the color, why does the black louvered cap have grooves on the side when the white cap doesn’t?
@DundasJafineInc2 жыл бұрын
Both caps have that "groove" all around the outside of the cap, although this may be more visible in the video on the black version simply because of the color. This groove is a recessed caulk edge that helps to guide the caulking gun around the cap and assists in a clean caulking application
@4ever1rc2 жыл бұрын
What if there’s carpet?
@13slot28 Жыл бұрын
What about it?
@mrbuckmeister2 жыл бұрын
If the box is already installed, do you have to cut open the dry wall to install this?
@DundasJafineInc2 жыл бұрын
This product gets attached to the hard metal pipe that would be running through the top of the box (already installed) and shoud be visible in the cavity of the box. This connector clamps to that pipe and then the flex dryer duct can be twisted onto the end of the connector and attached to your dryer
@gregk82462 жыл бұрын
In the video they only have about half an inch of the vent pipe protruding into the box. On mine I've got about 4 inches of pipe visible in the box. Plenty of space for a clamp.
@lessmigrantsmorewalls83922 жыл бұрын
No drill adaptor. Don’t buy!
@AD177092 жыл бұрын
Because you don’t need an adapter! Duh.
@lessmigrantsmorewalls83922 жыл бұрын
@@AD17709 yeah you do for smaller drills
@AD177092 жыл бұрын
@@lessmigrantsmorewalls8392 it’s not their fault you have a smaller drill.
@lessmigrantsmorewalls83922 жыл бұрын
@@AD17709 okay Im so sorry for having smaller drill
@AD17709 Жыл бұрын
@@lessmigrantsmorewalls8392 Most people have bigger drills. It’s not their fault. That’s your fault for buying it.