Great video, keep ‘em coming! Would like to see some experimentation with tape and roll-up conductive fabric antennas too. Thanks, 73 Tom KC3QAC

Lovin’ Your Work!

Nice to see you Gaz

Never heard of this brand. Is it superior as Icom or Drake ?

Hello Gary! :)

Thanks for the video Gaz, you actually don't need to remove the cover and move the jumper at all, unless you want to add the 15m Ham Band. It is just a button press for 11m (CB Band). I wonder why Dealers are charging £25.00 to open them up, when it is so simple?.

Does it save its setting when you switch off and back on ....without needing the contorted hand gesture

Hi Gary, just had a look online re this radio trying to find out what it's lowest output is for use with some of my transverters.

Yay! Hi Gary glad to see my talking to you a couple of months ago about your channel paid off!! Great to see you back!!

I was disappointed to see there were none in the shop to play with on my recent visit. What's going on with these guys?

August 2024 - With help from this video I was able to connect this locally to my FT710 within a few hours. Two things to note 1) The FT710 needs a small 9 to 16 volt power supply because it does not use the 13 pin plug. 2) Don't forget to enable SCU in the FT710 Op Settings General menu! My next task is to connect from external internet! Dean G8OTZ

I ended up buying this from ML&S last week, im yet to plug it in😅

whats the difference between the 980p and the 980PL?

Do you know how to connect it with SDR Connect. I do not see an omni button?

Is there any updates to this? Just making sure before I put this on my 7:10

I know this was a long time ago but the T100 that you have needs no extra wiring, the leads on the grips plug into a socket in the lever switch gear, the grips are about £230. Don’t know where you got £600 pounds from, I guess you were fed up of the bike and needed to slag it off as much as possible.

ANYBODY have a step-by-step procedure to get KIWI on their wideband receiver network?? I went about it in a clumbsy technical way using domain names from a service and when it stops presenting itself on the KIWI website....it takes forever to re-establish the link.

surely you need to set the IF offset?

Who knows why it is not possible to return the DSP value from FAST to AUTO on the RF Explorer, in the “240-960M” module?

Hello, thank you for your video. On my Retevis RT95 only the loudspeaker of the hand microphone works ???device loudspeaker and headphone output do not work. Of course, the software/device settings were checked for LS or LS and manual. Do you know this error?

why the hell is this not in the manual???

Thank for all your help Iv finally fixed it

so if I had an icom. 7300 and icom 9700 could I use one mic with two radios with this device?

i need a power output do you know the part number

Gary, you got me through it. de KF6JB

I owned a 2012 standard bonnie. It was heavy and the shocks are still in my garage. They were awful. I put predator exhaust on it and had it tuned. That mad a world of difference. I also did the tail tidy and I got the Thruxton seat for it when I bought it. It looked great. I didn't like the big gas tank though. I like the 360 degree crank over the 270. The sound was so authentic. I also put some Michalin Road 5 tires on it with a 150 on the rear. It made it corner better because it had a steeper crown. Loved the bike but the weight I didn't care for. I sold it and now kind of miss it. I crashed it twice, both times my fault and jumped over a dead deer going 55 mph. once. Thank slappers aren't funny. Luckily no spills. I just loved the sound of those pipes bouncing off of the close buildings. Did a road trip of 600 miles on it once in one day and it beat me up pretty bad with no windshield. I was whipped out. I still have the memories at least.

its to connect it to the kuranishi la-300 (location analyzer)

I can’t believe Yaesu puts us through this shambles.

Thanks Brother, just got my unit up and running again

Welcome "back" Gary.

Good to see you back

I use this as my base station and am going to get a second one day for my car.

I have this radio and love it. It is a quad band in the US and unlockable.

Might sound stupid could someone tell me where to get the apk folder in the first place

Interested in this , the twin 900 and 1200. Have you tried them and compare?

Thank you for sharing , it was very informative .

An interesting video, thanks. I have one of these radios. Whatever signal I receive the S meter shows 9. Is there a menu to adjust this?

Is that the 1500 watt version?

Do most repeaters use CTCSS tones for both transmit and receive, or just transmit?

No fuse and no series diode for reverse polarity protection? Crazy

so....how do you solve the 2nd issue - not recognized? I get the com port recognized in device manager (no typical USB sound when plugged in though) and I can select that com port in the bluedv app, but it still says firmware not recognized. If I try to toggle the serial button - it says "can not open com port." You talk about the two problems but offer no solution to the second - kina like all documentation for this software, identifies the issues, offers no solutions. I suspect I just wasted 110 USD.

Does anyone know how to tune in hf, 3mhz to 30mhz on rf analyzer?

hi. transmit uhf. gmrs. tks

Was this filmed at ML&S ?

Just ordered one... Can't wait!!

I'm baffled at how he put an aerial up in "just a tick".

Could this be used without connecting Lan cable to computer ??woukd just like the basic function

Now that looks like a beautiful thing...

Can you talk to regular cb radios with this ?

Konntes du die Phasenverschiebung messen?Das Ganze auf Resobanz ab zu stimmen habe ich Problemlos geschafft aber ich habe keine Ahnung ob meine Phasenlage stimmt....vy73 DO3FA