That was so helpful; thank you! Cooking is not frustrating any longer! I've been battling clicking for a few years already; I wish I had seen your video sooner. I used steelwool to polish the burners, and it worked!
@LGFM4 ай бұрын
Thank You! I have a Thor HRG3618U these models are similar and I tried everything, and the manufacturer was not very helpful, I tried your solution, and Voila!
@BigDawgTheGreat5 ай бұрын
Well it was worth a try. I have a THOR 6 burner range and have two of those exact burners with the exact problem. For years I haven't used the front right and left burners because of this issue. THORs customer service is no help either. They are based in California and somehow my house here in South Dakota managed to have one where there is no support for it. My orifices are clean (used ultrasonic jewelry cleaner). I've adjusted bypass jet settings. I tried this sanding trick too. No matter what my simmer burner pitters and goes out and clicks. Before seeing this video, I had just purchased what appears to be updated models of these burners and main jet holders. I get them this week. If they work, I'll post a video as well with the parts used. If not then 250 bucks down the drain. EDIT: I found another video where they sanded the inside of the burner base. I did a test run simply putting a single sheet of tin foil with all the holes cut out and that was enough to act like a gasket and got the burners working until the new parts arrive.
@lauraleaney11117 ай бұрын
Brilliant!
@jimbrooks73277 ай бұрын
Thanks, very helpful! Cleaning and aligning holes seemed do do the trick for me.
@ruipedropereira3668 ай бұрын
I turn machine on it heats and is ready for coffee. But when i press the button the red light pops and no coffee... Can someone help fix this please? Thank you a lot
@daniellogue76739 ай бұрын
Fantastique! You are a magician sir...
@kensnyderhomes9 ай бұрын
I don't know how you came up with this fix but I'm glad you did! I recently moved into a new house with this range and the clicking was insane. I ended up throwing the breaker to cut the power after lighting a burner.
@ptinio210 ай бұрын
Wow 😮
@chrisgetchell5274 Жыл бұрын
This is so great, we have had trouble with this for years. Thank you!
@sophieboyus Жыл бұрын
I found that a guitar string worked perfectly to clean out the gas jets. A Q-tip with some simple green, or other degreaser, helped with the cleaning process.
@sanalgariaev4644 Жыл бұрын
Hi, could you please tell me part number spark igniter?
@EugeneTurk Жыл бұрын
This solution worked well for 2 of my NXR burners which resulted in continuous ignition clicking. A clever and simple solution to an annoying problem. For what it's worth, the machining/casting of the burner components was pretty rough and contributed to this issue.
@h.m.stanley Жыл бұрын
Thanks a lot man. I really couldn’t believe this would work, it’s such a hack. Great work.
@mahery7 Жыл бұрын
Very informative 👍
@riftvalley1765 Жыл бұрын
For double shot just press it twice instead of making 2 separate shots, also either your grinder setting or the amount of beans you are grinding is not correct for a strong espresso shot, that's why your shot looked like American coffee. Increase the amount of coffee you are grinding and set the grinder at much smaller grinding setting, you will see the difference.
@tahaproud Жыл бұрын
Hello, I'm using that machine too and i wanna ask what is your grind setting? What do you think is the best number for espresso?
@theo9976 Жыл бұрын
Hi Ajay, I just want to say your KZbin video is the most comprehensive troubleshooting guide to the ubiquitous NXR ignitor-clicking issue on the internet. Your video is a great public service resource. Shame on NXR for not posting a troubleshooting video like yours. Great job!
@Dad-979 Жыл бұрын
Sounds like a flim flam in the rigamarow. It’s a common problem.
@billdewitt7708 Жыл бұрын
Thanks for the tip! Worked like a charm.
@jackiemsmith742 жыл бұрын
OMG! I've been switching burner usage and living with the annoying clicking for years! Thank you so much! Worked like a charm!!!!
@peterhanft46772 жыл бұрын
Such a well thought out video! I found it so helpful. Thank you.
@jamessquires7532 жыл бұрын
Thanks for this vid! The clicking has been driving us nuts.
@theo99762 жыл бұрын
Great video! When I called NXR support they made no mention of the burner head needing to be flat.
@ikeben4002 жыл бұрын
I had to clean my burner heads and let it sit for 48 hours to fully dry out. Started it back up and it works like a charm...
@leelammakurian52312 жыл бұрын
It seems that you are the only one who gave a reasonable explanation of the cause of the continuous clicking. Thank you very much.
@sonatahybrid2 жыл бұрын
I just made this mod on my NXR to correct that annoying clicking: kzbin.info/www/bejne/qZOZi2Wnq5uthbM
@jackiiiex32 жыл бұрын
For anyone that tried this, but your stove is still clicking .... are there any other solutions or suggestions? I tried this but my stove is still clicking
@shwetaahuja61512 жыл бұрын
Hi Ajay my low flame pore is clogged. How can I open that
@y0derme2 жыл бұрын
You are my hero. Thank you for this brilliant and simple fix.
@wbocxe3 жыл бұрын
Sounds good! I'll give it a try. I have the same stove and the same problem.
@victoradao19653 жыл бұрын
Thank you so much, I will try this tonight. I have an LED out, do you know how to remove the front panel?
@appleovereasy3 жыл бұрын
Genius
@appleovereasy3 жыл бұрын
Thank you!!!!
@ML-gl8jr3 жыл бұрын
I'm so grateful and impressed. I spent hours with pins and paperclips cleaning holes and cleaning with wire brushes and cotton swabs to no avail. I realized after watching your video that there was a small gap created by uneven contact between 2 components of the burner. Problem solved. Heartfelt thanks.
@FF-xl7yw3 жыл бұрын
Why not use a fine sandpaper? Now everyone has a concrete/cemented area. BTW THIS IS A SHITTY PRODUCT. poorly made. Crappy 3000 dollar range. Why the hell should people do this ??? AVOID THIS CHEAP PRODUCT AND DONT BUY! THE COMPANY SHOULD FIX AND NOT THE USER.
@FF-xl7yw3 жыл бұрын
Too wordy!!!
@mrelllillo3 жыл бұрын
It’s amazing that a range that costs $5000+ US dollars and Costco sells, have this design flaw. Thumbs down for the engineers at NXR, this problem should be a recall issue, and a re-designed burner should be provided to NXR range owners with this problem. I am very disappointed at this company. Thanks for the video, they should hire people as smart as you, that understand the laws of physics in real world scenarios, at this companies.
@seankelley28652 жыл бұрын
seriously wtf. their support sent me to this video, how lame is that? btw i tried this technique and its less clicking but still clicking at high temps. ghetto product, not a please customer.
@joeeckborg86453 жыл бұрын
Thank you very much for this sir
@pegeman15103 жыл бұрын
I have the same issue, thanks for the video. I have to try the same things
@edanderson54363 жыл бұрын
when i turn the test mode on to clean it , the red light blinked at first but then stays on... it is an 8yr old machine..
@stephengrillos3 жыл бұрын
Thank you! I can't even begin to tell you how frustrated I've been with our NXR range. This fix did the trick. Thanks for sharing this!
@PaolaGonzalez-ol3hr3 жыл бұрын
Por favor en español las instrucciones o subtitulo 😞
@floridacowie3 жыл бұрын
Wondering what your background is? Materials Engineering? Brilliant problem solving. When I see brass used in an application like this, I can only think of the ship breakers. I bow in deference to them. They are amazing.
@jbdial23 жыл бұрын
Do you know you can push the button twice for two shots?
@lmtz4 жыл бұрын
Amazing, I think every NXR customer should watch this...great job!
@mpsingha4 жыл бұрын
Nicely explained!
@mpsingha4 жыл бұрын
I need to order the Burner base for Top burner as mine accidentally broke while trying to remove to clean it as it had kinda stuck . Please post a link to order part NXR-10600004A0 if you have .. 🙏
@jasonsparks17264 жыл бұрын
does the burner base just lifts off? mine does not come off
@ajaymalhotra38534 жыл бұрын
Yes, the burners are usually very easy to lift. Yours might be stuck over time.
@maggiejordaan13624 жыл бұрын
The water dont work
@rishimalhotra48054 жыл бұрын
You might have a clogged pipe. You may need a technician to look at it.
@riftvalley1765 Жыл бұрын
Check your waste water try if it's getting too much water, in that case you need to replace your brew valve, if waste water is normal then your pump filter looking white circle thing has dirt in it, that's only if you can hear the pump running, otherwise your problem is the pump itself.
@electronicwoe4 жыл бұрын
How does fixing the flame fix the clicking? Does the flame keep the spark from jumping or something?
@ajaymalhotra38534 жыл бұрын
This model has auto ignition. If the burner senses lack of ignition but the burner knob is in any of the ON positions, then it starts sparking to induce ignition.
@electronicwoe4 жыл бұрын
Ajay Malhotra oh okay! Thanks for the reply. I will be testing out your technique today! Great video