Does the hydraulic fluid heat up too much on the JD 17G with long duration use?
@NeedhamAg18 күн бұрын
@@scottfarr2413 As long as you keep the oil cooler clean we haven’t had any reports of 17G getting hot, even in southern locations working multiple hours per day. The oil coolers are good and running a mower wouldn’t be any different to digging hard soil all day long.
@wesleywells76442 ай бұрын
What about on kx030-4
@NeedhamAg2 ай бұрын
The TLBE-90 will work without the oscillating carriage on a KX030, or you can also buy the narrower TLBE-70. See the link below kzbin.info/www/bejne/Z5vbqKxuhJ53aKMsi=f_GwC4sLPoGXwRbN
@wesleywells76442 ай бұрын
That oscillator looks noce dont no if want smaller
@wesleywells76442 ай бұрын
Can I run on kx030-4
@NeedhamAg2 ай бұрын
The TLBE-90 will work without the oscillating carriage on a KX030, or you can also buy the narrower TLBE-70. See the link below kzbin.info/www/bejne/Z5vbqKxuhJ53aKMsi=f_GwC4sLPoGXwRbN
@pardeepdhanda77254 ай бұрын
What is wheat seeds name
@ghostedwaffle21515 ай бұрын
Will these fit on a Kubota U27-4?
@NeedhamAg5 ай бұрын
You need a bigger mower for the U27-4 (as the U27 has more AUX flow). Here is a link to that mower. kzbin.info/www/bejne/Z5vbqKxuhJ53aKMsi=1bJUgCVnLGf711A1
@zainuddinbubut77226 ай бұрын
Dimana bisa dibeli di Indonesia pak
@irakozak16 ай бұрын
I have a mini Excavator me-10 1-ton , what would you recommend and what is available in the Midwest USA
@NeedhamAg6 ай бұрын
Which 1 ton machine is it and what is the aux flow? Most are too light to run the lightest and smallest flail mower I’m afraid.
@rodbutler34917 ай бұрын
Good job!!!
@sarah_farm7 ай бұрын
Your videos are amazing! If you like farming or harvesting videos, I look forward to having you visit my channel to have relaxing moments together!
@A.P.I.-2bon2b7 ай бұрын
I'm starting the mole hill diner. Then grass seed will pop up 😂
@zaheery2k18 ай бұрын
Hi Sir, I hope you will be fine and enjoying your life. I am Zaheer from Pakistan. I grow wheat crop in November 10th 2023. Our area totally depand on rain feed area. There is no water. We totally depand on rain. Now 60days has been passed no water give to wheat crop. Please advise what I fertilizer is best for spray or what I should do in this situation? Thank you in advance.
@edelm60628 ай бұрын
Thank you the presentation. very informative.
@harrapacivilization27798 ай бұрын
In india wheat reaches its maturity in 5 months..we only get 25 quental per acre
@NeedhamAg8 ай бұрын
That’s 101 bu/ac, that’s not bad for 5 months. What would the higher yielding areas of the field yield ?
@akashdeepsingh37808 ай бұрын
In India the temperature is warm in harvesting time the yild is dempand on temprature if temprature is good yild will increase @@NeedhamAg
@11T87210 ай бұрын
Is that possible with corn?
@NeedhamAg10 ай бұрын
Most of the wheat in Kentucky is planted after corn and the majority of these acres are no-tilled into corn. The state yield continues to rise and according to USDA the average yield for KY in 2023 was 90 bu/ac.
@11T87210 ай бұрын
No, i meant fertilizer P inside row with seed but of course lowe rate.@@NeedhamAg
@NeedhamAg10 ай бұрын
@@11T872 You can, but not much in the row (with corn on 30” rows) on account of seedling injury. You need to place it alongside and under the seed with some N, ideally in a 2x2 band.
@bigtractorpower10 ай бұрын
Very informative.
@DaytonaJim7810 ай бұрын
How much
@NeedhamAg10 ай бұрын
The TLBE-90 shown in the video is currently $5990.00 (October 2023 price). The oscillating carriage adds $890.00.
@zainuddinbubut77226 ай бұрын
Dimana bisa dibeli di Indonesia boss
@philipbrewer4291 Жыл бұрын
Base cost?
@NeedhamAg Жыл бұрын
$4990 is current price (Sep 2023).
@Fayettepropertysolutions Жыл бұрын
Available in the USA I hope?
@NeedhamAg Жыл бұрын
Yes we distribute the Lipa mowers across all of North America from our warehouse in Kentucky.
@dmtadventures7044 Жыл бұрын
Ditch the music. I didnt look for your videos to hear that. I want to hear how the machine handles cutting various materials, I want to hear how the head bogs and spools back up. You know, the things a prospective buyer is interested in. Just my 2 cents for whatever it’s worth
@NeedhamAg Жыл бұрын
Good comment, thanks. The video below is a shortened version without the music! kzbin.info/www/bejne/eZOohHZ5lqlmbJI
@rajazameerwagh0250 Жыл бұрын
Goods Agri
@Lanninglongarmmowing Жыл бұрын
That bobcat is in nice shape. I have a 320 as well. Mine is pretty clapped out.
@NeedhamAg Жыл бұрын
It was sand blasted, painted, new decals, new seat etc ! We use it at trade shows to display a mower.
@Lanninglongarmmowing Жыл бұрын
@@NeedhamAg Oh wow. Pretty neat.
@iainguthrie9888 Жыл бұрын
What would this wheat have yielded roughly?
@NeedhamAg Жыл бұрын
100-120 bu/ac in this field. But this year we had better wheat and still no-tilled into it and got good stands. Spreading the residue is key.
@user-sr7vr9gz7c Жыл бұрын
Hola tengo una jhon deer 750 y tiene las cuchillas el biselado para el lado de la rueda de calibre afecta algo a la máquina?
@NeedhamAg Жыл бұрын
Si las necesitas tener de manera correta por que si no la semilla solo quedaria fuera.
@user-sr7vr9gz7c Жыл бұрын
@@NeedhamAg dale vy a tener que darles vuelta y después tengo otro problema la maquina la compramo usada y tengo el problema de que se va para un lado encima q surco ya noc que puede ser
@TomBoillat Жыл бұрын
i thought the seed opener disk was installed with the flat side to the seed boot?
@NeedhamAg Жыл бұрын
Flat side towards gauge wheel on the JD single disc opener.
@paullucas3 Жыл бұрын
Another informative video, thanks
@dorinpanda2105 Жыл бұрын
Thank you! Greetings from Romania
@NeedhamAg Жыл бұрын
Where in Romania are you ? I have worked near Alexandria and Braila. Good soils near Braila !!
@kevinpeterson4146 Жыл бұрын
how many nazi customers do you have?
@socalgal5015 Жыл бұрын
You support a murdering white supremacist who owns Kansas Air Seeder? Shame!
@paullucas3 Жыл бұрын
Good work young man!
@rajazameerwagh0250 Жыл бұрын
Afsoc
@rajazameerwagh0250 Жыл бұрын
Geo Ok
@paulmoore8520 Жыл бұрын
Excellent talk
@rajazameerwagh0250 Жыл бұрын
Good Agri
@Agrimatter Жыл бұрын
Hi just i want to know how many kg seed you used in per acer
@NeedhamAg Жыл бұрын
I think around 275-300 seeds per M2, so with a 50-52 TKW that would have been around 140-150 Kg/ha. Always plant by seeds per ha, not Kg !
@Agrimatter Жыл бұрын
@@NeedhamAg Ok thanks And what was your yeld
@mohammedaahil4176 Жыл бұрын
Nice informative
@dequavisjones4869 Жыл бұрын
I have never understood the carbide boots: they just have a small inlay up front, nothing protecting the normal cast tails. I buy el-chepo boots, heat them with rose bud, which removes paint, and opens up the cast poors. Them hard surface weld them everywhere they contact soil. 44 pound rolls of flux core hard surface wire actually go's a long way. To me it this process is cheper and get s waaaayyy more durable boot. Whats everyone else think?
@michaeldouglas12432 жыл бұрын
Excellent video. I always learn from Phil's information.
@microsoilenhancersinspirey57502 жыл бұрын
Phil I got something you need to come look at... I’m close to Allensville which I thank you spent some time at when helping out crop production with wheat several years ago... Any ways I’ve got corn soybeans and buckwheat planted with a drill on 7.5” rows!.. The beans are a 2.8 planted around 250,000 and the corn is around 16-18,000 seed 84 day open pollinated along with about 3 pounds of buckwheat... Got sunflowers with beans and buckwheat in another field... Our goal is to stack dollars on acres!.. Our first crop we are after are the double crop beans cause this is all planted behind wheat... But as long as we can maintain the farm average on beans then the corn buckwheat or sunflowers are a bonus cause we used the same foliar program on our beans only as our crops with corn buckwheat and sunflowers... Pretty cool to watch with the rain we been getting...plus there no synthetic N or dry fertilizer applied either...just bio stem(15 gal) 24% liquid carbon(1.5 gal)and sugar(2#)...my neighbor spent 330 just on N and fertilizer on his corn crop not counting seed so I can make a lot less bushels than him not counting beans and buckwheat!.. if you will give me an email address I’ll send you some pics and video... Very helpful info you just provided!..thank you!
@KrazyKajun6022 жыл бұрын
where are LIPA flail mowers manufactured?
@NeedhamAg2 жыл бұрын
They are built in Italy and are very good quality. We had an older customer who purchased one from us about a month ago. He told us he had bought many different mowers over the years and he said the Lipa mower was the best built mower he had ever purchased.
@abitoutofsorts2 жыл бұрын
It’s pretty easy to overlook this simple part. The needhams are my favorite that I’ve tried
@fredkohlman88602 жыл бұрын
How did the harvest compare?
@fredkohlman88602 жыл бұрын
Like those closing wheels. I'm gonna add more weights on both the 15 & 20 ft. 750s. Thanks for this and other vidios.
@blkeele2 жыл бұрын
Looks like it needs a complete rebuild.
@NeedhamAg2 жыл бұрын
You wouldn’t believe how many people buy drills on online auctions and never look at them. Some end up being good buys, but most are worn out and too much money.
@ShoaibKhan-xo6fs2 жыл бұрын
In Pakistan the wheat lodge ,there fore we can not get high quality wheat,can u tell how to avoid lodging
@NeedhamAg2 жыл бұрын
We have a video on this topic on KZbin, it's called Needham Ag Reducing Lodging.
@EDBZ282 жыл бұрын
Thank you for the very informative video. I’ve always wondered...on greasing this fitting (when they take grease), how many pumps do you give each fitting? Are they sealed bearings that shouldn’t be over-greased on the main hub fitting? On my 1560 I can hear them “crackle” after about 3-4 pumps, but on the 1990 ccs I just bought and have in my shop, I don’t hear any crackling after 3-4 pumps?
@NeedhamAg2 жыл бұрын
We recommend greasing the axle about every 50 hours of use, ideally more frequently if it’s very dusty. The bearing is sealed, so you can’t over grease it. We usually give the axle 4-6 pumps with an electric grease gun.
@utubedude28422 жыл бұрын
Will this work with forage sorghum or sorghum Sudan?
@NeedhamAg2 жыл бұрын
If the sorghum/sudan is small, yes. But once it exceeds around 4-6” in height the leaves tend to funnel the N down the whorl which causes more leaf injury, especially at higher N rates. Wheat/barley/oats don’t have a whorl, so liquid N runs away from the plant.
@EDBZ282 жыл бұрын
I’ve been told if it hasn’t been done so, you can turn the pin 180 degrees and it’ll tighten things up again....just curious of your thoughts? At what point do you know to turn it to ensure getting most wear outta original side?
@NeedhamAg2 жыл бұрын
We have found that the outer bushings wear at approximately the same rate the center pins. This is especially true with cheap aftermarket outer bushings, which are MUCH softer than OEM or extended wear Needham Ag MOA kits. So, if the outer bushings account for at least half of the total side to side play, rotating the pins 180 degrees doesn't change the amount of side to side travel at all, all it does is keeps the opener running at maybe 6 degrees (rather than maybe 5 with worn pins and bushings). But once the angle drops much below 7 degrees (factory opener angle with new pins/bushings), the cutting performance in damp/tough residue drops quickly. Therefore, by the time growers are contemplating turning the pins, their bushings and pins are both shot and need to be replaced.
@detroitdiesel29832 жыл бұрын
I turned my pins 180 degrees a couple years ago, eliminated 50% - 80% of the side-to-side travel. Eventually I will replace pins and bushings, but this will get me by for quite a while.
@EDBZ282 жыл бұрын
@@detroitdiesel2983 hey thanks for sharing.
@EDBZ282 жыл бұрын
How do you know when to replace the factory tabs? I realize you’re in the business to sell, and I’m considering your tabs when mine are worn out.
@NeedhamAg2 жыл бұрын
The Factory JD 50/90 series white seed tabs are new around 5 5/8” long and they need to be replaced at around 4”, but they usually break off long before they get down to that length. The Bonilla tabs are much better because they are thicker to do a better job holding seeds down, plus they are tapered to match the seed slot.
@NeedhamAg Жыл бұрын
I believe the factory tabs are new at 5 1/4” (total length). They don’t do much when they reach 4”, but they often break off before that length.