Thanks Edwin Just changed the battery on my Scout 1200. 2019 many thanks!!!!! Jon
@mishakolomoicev97013 ай бұрын
Albogreasy! 😅
@rajatmaurya64014 ай бұрын
That was not a scratch guys. You are fooled.
@-fcousin67798 ай бұрын
Thank you soooooo much! Same on my Octane. You saved me.😅
@heavy_proton8 ай бұрын
is it safe matte black pipes from Vance and Hines?
@socosurf Жыл бұрын
silly question, how did you start the bike with the kickstand down? I have a bobber too.
@johnpark219 Жыл бұрын
i havent started my scout in 3 months and the battery is dead. I need to get it started haha
@philipcabajr.5931 Жыл бұрын
I’ve been reading on forums that the right side is a pain. Your vid made it look super easy.
@mathlover2299 Жыл бұрын
Very interesting that you said it was repetitive. I found BM to be a new adventure everyday. Maybe it was because I camped with a theme camp and met really cool people every day.
@RailroadGuy49 Жыл бұрын
I wonder is this work on residue from melted microfiber?
@filiplaskovski9993 Жыл бұрын
As brand-new owners of motorcycles or any vehicle for that matter, we are so over protective of our new baby…. I curse the fuckwit that threw a plastic bag out, because it flew right on my brand new MT09’s headers 😡 I’ll give me muscle a crack mate!
@TheCherrybomb0824 Жыл бұрын
Good video thanks, waiting for my new battery to arrive then I'll change it
@ianparrish6543 Жыл бұрын
Use a heat gun. And a wet rag. 😁
@phillipveneris8158 Жыл бұрын
Had some success using oven cleaner, most of remaining residue came off with autosol; it's not a 100% sure method. Just know that if your pipe isn't chrome, the area you work on that has undergone heat cycles will become chrome when using the said method.
@jaishekarjohnny64782 жыл бұрын
Are you gay
@nova.10510 ай бұрын
Lol
@rodolfosabater77812 жыл бұрын
How are you able to install the right side so easily?
@robertcoons65622 жыл бұрын
Not sure why there were so many negative comments on the music 🤷♂️? I liked it and did not think it was too loud. I would have liked a little more information on how you did get to the top bolt on the right side, and I am curious what passenger seat you chose. Thanks for the video!
@VkterE2 жыл бұрын
Hi! How much did the 10day rv rental cost?
@davidsmart35142 жыл бұрын
Get the exhaust hot by running the engine for a bit and shut off engine. Wipe the area with a cotton, non blend towel. This will remove most of the gunk, after the exhaust cools use goo gone to remove any remaining grime.
@StuckAndStones2 жыл бұрын
Where did you rent the RV?
@jaybird84582 жыл бұрын
I’m going for my 1st time this year and taking an RV. How often did you run your generator? Did you feel pressure not to run it because of noise concerns for neighbors, or did you feel free to run it for the A/C as much as you desired?
@EdwinKua2 жыл бұрын
Hi there. We didn’t have a generator in our RV. We basically had to let the vehicle run in idle for half hour a day to recharge the fridge’s battery/power. It is preferred not to do this at night but during the day it seems alright. Overall I’d test the vehicle once a day to make sure everything is in check. That way you won’t be caught out when you need to leave.
@jaybird84582 жыл бұрын
@@EdwinKua thanks for the reply. If you have time for one more, if you didn’t have a generator to run A/C then what did you do keep the RV cool inside? Or did you just tough it out?
@EdwinKua2 жыл бұрын
@@jaybird8458 hahaha. Yea we just managed under the gazebo and drank cold beer. You’ll be out most parts of the day - mingling so you won’t notice the heat too much.
@JohnMcCormack2 жыл бұрын
Thanks for posting this. I stood a little too close to my bike while it was still hot and while I was wearing winter textile bike trousers. The result was a big melt patch on my exhaust and a big melted hole in my winter gear. Honestly, the melted patch on the exhaust annoyed me more, so I’m really looking forward to putting your solution to work.
@alexdod606 Жыл бұрын
Did this work? I have the exact same issue just with a rag that fell on the pipe
@JohnMcCormack Жыл бұрын
@@alexdod606what eventually worked for me was gently scraping from the edges of the burnt plastic patch with an old brass coat hook. I had seen another video explaining that chrome is a harder material than brass and the brass would not damage the chrome pipes. I actually managed to clean it completely while the bike was cold.
@misscarmen4912 жыл бұрын
Thank you so much! This helps so much.
@seanflynn48362 жыл бұрын
Cheers mate!
@longface60452 жыл бұрын
Which wire is the trickle charge wire.
@BhaveshNblu2 жыл бұрын
Those were not scratches!!!
@direklester9262 жыл бұрын
Very helpful video you got here. Thanks! Ride safe
@johndn92382 жыл бұрын
Very helpful, thanks
@g-man58092 жыл бұрын
Also, the wooden tool is a great tool on chrome, leaving no scratches that I know of with Wd-40, for example:this one construction crew built a aswsome bricked gas bbq station with a sink, the whole 9 yards, granite top and everything, well they thought the customer would pull all the huge pieces of plastic film off all the chrome on the BBQ top and the bottom doors, themselves, they didnt, it was baked on, in the Southern California sun for a year. I was called there to handle this pickle the contractor was in, we used Goof-Off and other things but I finally ended up with the WD-40, a wood stick, lots of elbo greese, busted fingernails, and lots of why did they do this, yet I got it done. The metal polish would have been used to polish it up, I'll use it next time... Your teqnique was great, Cheers. NICE RIDE.
@g-man58092 жыл бұрын
Yea, my heat gun tip portion touched a plastic bag... Ugh, I'm here learning new teqniques, Thanks and nice ride.
@bernhardschmalzl20842 жыл бұрын
Thanks for sharing. Had a similar problem with my BMW. Your "How to" worked pretty well. You made my day. re
@kensantiago1322 жыл бұрын
Your audio needs help dude.
@kcgfy812 жыл бұрын
Amazing what you can find on KZbin if you just searched. 🤣 I have a black garbage bag melted to the flexpipe and catback of my exhaust. I saw it when I was in bumper to bumper traffic about a week ago and did my best to avoid it and thought I did but nope, spotted it today when I went to work on the car. Not sure if it's going to cause issues - I hope not!
@johnmcclelndon76413 жыл бұрын
Great video don't wear rings when working around batteries ot ca burn off your fingers
@p.j.mercer57883 жыл бұрын
Worked like a charm! I was dumb enough to put the dust cover on too soon yesterday and noticed a similar scar. The Easy-Off and some scraping and the pipes look like new.
@seanflynn48362 жыл бұрын
I did the exact same thing this morning lol
@randyflores6420 Жыл бұрын
And I did the exact same thing right now 😂
@333lucerodelalba73 жыл бұрын
To munch eco bro.
@maddmavic3 жыл бұрын
I have a 4 wheeler muffler that’s alum n has a burnt decal on it any idea how to get off
@K.D.513 жыл бұрын
Does this method work on matte black pipes?
@EdwinKua3 жыл бұрын
I wouldn't recommend it my fren. Chrome goes through electroplating which is a lot tougher than matte coating. That said I've never tried it as I don't have matte black coats. If you wanna try , test it on an small inconspicuous area of the pipes
@K.D.513 жыл бұрын
@@EdwinKua thanks.
@RexyFan3 жыл бұрын
The beat drop at 2.04 got me singing ... I’m sorry Ms Jackson ..
@sportrocgirl553 жыл бұрын
First, I love your shirt. Lol second very good video thank you. It’s getting cold here and I’m going to take out my battery and put it in a trickle charge in my apartment. I’ve been dreading it and putting it off because it looks like a hassle. Looks easier than I thought it would be. I had no idea how until I saw your video.
@faro87843 жыл бұрын
Why tf did this get recommended to me
@c28hoe3 жыл бұрын
Thank you for the clear guidance. ^^
@topjohny693 жыл бұрын
i installed a guard dog keyless fob start and it seems to be searching for signal and draining the batterie , have to keep a trickle charge on it after i change the batterie , thanks for the help !!!!!!!
@EdwinKua3 жыл бұрын
Keyless fob sounds like a great idea! I think I'll do a bit of research into this one. Indian Scout's key feels a little cheap IMO.
@topjohny693 жыл бұрын
@@EdwinKua it’s nice I glued a Indian coin over the key hole , leather strap ruined the chrome so that piece had to be replaced, Guard dog has a variety of keyless start
@Grenka813 жыл бұрын
Bro, yov got such ugly nails!
@KevinJohnson-rc8dw.3 жыл бұрын
You’re gonna hear me fart!
@dangelorussell4164 жыл бұрын
That's sooo funny
@kingssing4 жыл бұрын
Thank you great tip
@thaijohn19624 жыл бұрын
Umm I struggled to here you so couldn’t watch 😤
@drengrband56184 жыл бұрын
Just use a S.O.S pad the round ones with the detergent already in it and some water. Less items, less time, it will not scratch as long as your not haulking it to hard. Cost you $2
@Cbrmansc774 жыл бұрын
Indian should make this their how to!!! Great video you rock man.