Пікірлер
@brianheckemeyer1275 Күн бұрын
This video is incredibly useless and annoying. What a load of crap.
@MelWood-g6r 2 күн бұрын
Hi how do I set custom sound?
@rigobertomoreno8853 3 күн бұрын
Entre la 670 y la 677 cual es mejor pareciera lo mismo en fuerza
@tdotlogan 3 күн бұрын
What is the part # for the hepa filter?
@robertocaggiula6439 3 күн бұрын
Commenti in italiano grazie.
@robertocaggiula6439 3 күн бұрын
Specificate la densità che deve avere l'olio x la catena.
@KukucsIldiko 3 күн бұрын
This lawn test is nothing.
@TechIllusion-EN 3 күн бұрын
@KukucsIldiko then please also make a corresponding suggestion for improvement so that I can work on it ;)
@Vitalello 6 күн бұрын
good review
@TechIllusion-EN 3 күн бұрын
@Vitalello Many thanks for the praise and support! I'm very pleased that you like my video 😊👍🏼 Best regards
@JC-sc4il 6 күн бұрын
Great video, THANK YOU ! 👍
@TechIllusion-EN 3 күн бұрын
@JC-sc4il Many thanks for the praise and support! I'm very pleased that you like my video :-) Best regards
@syjwg 7 күн бұрын
Both have the same price in UK, about $170 USD.
@TechIllusion-EN 3 күн бұрын
@syjwg okay, so that makes the purchase decision much easier then...😅👍🏼
@GregNTech 9 күн бұрын
LoL, all 3 are unavailable in the United States
@TechIllusion-EN 7 күн бұрын
@GregNTech ahh crap... :/ Yes, that's always one of those things. Unfortunately, the products are not available in every country. Nevertheless, I try to provide all possible variants in my video descriptions. Best regards 😊
@bryans9803 9 күн бұрын
Not a great review. Using the word fake without context is misleading- it’s an inexpensive Chinese knock off. The makita runs about $199 and the meliff runs about $32. The makita is not a “bit more”. 50% of the performance for 15% of the price is a fair trade off. Ending the review with I cant’t say this is not a rubbish tool is such a cop out and poor language skills.
@TechIllusion-EN 7 күн бұрын
@bryans9803 Many thanks for the feedback! Yes, the term fake is perhaps a little exaggerated. It is a replica device. That's more accurate. Best regards
@newname. 10 күн бұрын
Brushless of course better! Thanks for video!
@TechIllusion-EN 7 күн бұрын
@newname That's right! There's definitely more power in it! :) Thanks for the praise and support! 💪🏼 Best regards
@gofindyourself6568 11 күн бұрын
looks v3ry heavy fatigue free work over an extended period? carrying around a 13kg weight with a thin should stereo digging into your collar bone. its a no thank you from me.
@TechIllusion-EN 10 күн бұрын
@gofindyourself6568 I don't think that's a problem for short applications. But if you do it professionally and are on the road with the device all day, then it's probably not the right choice! :-) Best regards
@tauestielervargas529 17 күн бұрын
I'm thinking about buying a product like this. I have a small farm and I think it will help me a lot. I'm afraid I won't be able to find anyone who can do corrective maintenance here in Brazil, if necessary. Could you tell me if the product has many problems?
@TechIllusion-EN 16 күн бұрын
@tauestielervargas529 Unfortunately, I can't say anything about this, as I don't have any long-term experience... 🤔 But I can also imagine that it will be difficult in Brazil as far as repairs are concerned. Best regards
@DJ-ve5lr 19 күн бұрын
I cant listen to Ai voices
@TechIllusion-EN 16 күн бұрын
@DJ-ve5lr Many thanks for the feedback! I can understand that. You could be forgiven for thinking it was an AI voice. I can promise that there is a real person behind the professional broadcast voice! An AI voice is not yet capable of generating such complicated voice overs. This would be immediately noticeable in difficult passages. I have already tested this myself several times... 😊👍🏼
@1323-j6k 3 күн бұрын
@@TechIllusion-EN AI answer, lol
@kathyern861 20 күн бұрын
"When you depress the trigger, the nail gun shoots approximately one nail" Approximately? Approximately includes 0-3 nails. Is that what happens? Sometimes 0, sometimes 1, sometimes 2, sometimes 3 nails? Huh? ha-ha
@TechIllusion-EN 16 күн бұрын
@kathyern861 Did I say that in the video? 😆😂 Haha, okay. Sorry That's a mistake, of course. There is always only 1 nail per release... :-) Best regards
@kathyern861 16 күн бұрын
@@TechIllusion-EN Always good to know that people can rely on receiving accurate and reliable information here in KZbin.
@TechIllusion-EN 15 күн бұрын
@kathyern861 If you just think for a moment about what you hear, then I think it becomes clear what is correct and what is not
@kathyern861 15 күн бұрын
@@TechIllusion-EN Eve in the Bible did just that and how did it work out for her? The devil is a liar and a deceiver. And one of the devil's best deceptions is exactly what he has told you, "Listen to what people say to you and it will become clear to you what is correct." There are billions of people who have bought into this very deception. Jesus said, "my sheep hear my voice and they follow me." There are billions of people who are hearing the voice of the devil and following him - and they think that what he has to say is correct. There are many who have exchanged the truth for a lie. Woe to them who call darkness, light.
@dasaidproabisai3119 21 күн бұрын
Nice video! I hope you can review in future the Makita subcompact line, I’m pretty sure that’s a good idea for you Chanel! 🤠
@TechIllusion-EN 20 күн бұрын
Hello @dasaidproabisai3119 Thank you for your praise! 😇👍🏼 I will definitely have a look at a few more tools and test them thoroughly! 😁💪🏼 Have a nice weekend
@ciobotarudragos5447 21 күн бұрын
Hello what would u buy between segway and the worx vizion ? Pls i need as ice
@TechIllusion-EN 20 күн бұрын
@ciobotarudragos5447 This depends on the nature of the garden and what you expect from the mower! I have already mentioned in detail in the individual videos what type of garden the mowers are suitable for. It's best to watch my individual videos again until the end. There is a checklist at the end! :-) Best regards kzbin.info/aero/PL83qYMCM7FetE1DsEz4OuB-CnaPP4NpA_
@bram13666 21 күн бұрын
Why not let us hear the sound it makes.
@TechIllusion-EN 20 күн бұрын
@bram13666 Sorry. Maybe you can hear the device noise better in my other test videos! Here are the links: kzbin.info/www/bejne/r6LQh6avd86Zbrs kzbin.info/www/bejne/mXOXhJh4icirq5o kzbin.info/www/bejne/r5mndZSsodOWf80 Best regards
@johnpujol9313 23 күн бұрын
Anyone else sit thru this whole video waiting for the comparison on run time only to find it’s not mentioned 😭
@TechIllusion-EN 21 күн бұрын
@johnpujol9313 Thank you very much for the feedback and the suggestion for improvement! I will implement it in the next video. As for the battery life, I can say that the 40V device lasts the shortest because it has the most power. The DUB362 and DUB182 are very close to each other, but have slightly less power! Best regards
@chrisandshazza01 23 күн бұрын
WTF is going on with the voice, lasted 1 minute sorry
@TechIllusion-EN 16 күн бұрын
@chrisandshazza01 Thank you very much for the feedback and constructive criticism! I currently have a new narrator who is dubbing my videos! Maybe this voice is more pleasant? 🤔👍🏼 Best regards
@paddle31 23 күн бұрын
Thx 👍
@TechIllusion-EN 22 күн бұрын
@paddle31 You're welcome! Thank you for your support! 😊👍🏼
@summerforever6736 23 күн бұрын
Ai talks
@TechIllusion-EN 21 күн бұрын
@summerforever6736 thanks for your comment! I can understand that. You could be forgiven for thinking it was an AI voice. I can promise that there is a real person behind the professional broadcast voice! :) An AI voice is not yet capable of generating such complicated voice overs. This would be immediately noticeable in difficult passages. I have already tested this myself several times... 😊👍🏼
@KeyserTheRedBeard 24 күн бұрын
Impressive video, Techillusion EN. Looking forward to seeing your next upload from you. I smashed that thumbs up button on your content. Keep up the fantastic work! The detailed comparison of the torque ratings was particularly enlightening. How do you think the weight differences impact the usability of these wrenches in real-world applications?
@TechIllusion-EN 21 күн бұрын
@KeyserTheRedBeard Thank you very much for the great praise and support for my work! I'm very pleased that you like the video :-) I can say that I currently mainly use the DTW300 and DTW700. I also used the largest model for quite a while (with adapter) but it's just very heavy, which leads to fatigue in the long run! If you don't need that much power, take the DTW300, otherwise the DTW700 and you're on the safe side :-) Best regards
@louisvl10 25 күн бұрын
the full option accessories included in the fake ones make it worth it if you already have the real one. those accessories alone from Makita are more expensive than the whole fake set.
@louisvl10 25 күн бұрын
the extra fake blower itself can be useful for dirtier tasks
@TechIllusion-EN 24 күн бұрын
@louisvl10 Many thanks for the feedback! :-) Haha yes, you're right. The price of the fake device is so attractive that it's worth it for the accessories alone! 😁👍🏼 Best regards
@krystian8508 25 күн бұрын
Nice collection 👍 . For a standard car use, I would go with the smallest one. With some agricultural stuff, probably with the mid-torque. The biggest one, due to the 3/4 is rather to be used in some truck workshop. 3/4 impact sockets are to expensive for a "regular" customer. Also they start with like 19mm size so cannot be used for smaller nuts.
@TechIllusion-EN 24 күн бұрын
@krystian8508 Thank you! 😁🙌🏼💪🏼 Exactly to the point! :-) I see it the same way. I even ordered an adapter so that I could use the biggest one to loosen my wheel nuts on my car :) Best regards
@jlm897 26 күн бұрын
Mind, the price is also a major criterion, isn't it??!!
@TechIllusion-EN 24 күн бұрын
@jlm897 No question about it! The price is a very decisive factor in the purchase decision! In my videos, however, I always refer to the links in the video description, as prices can change very quickly. If I present the device shortly after it has appeared on the market, it is usually very expensive. After a while, it is then just as expensive as the other models. That's why I don't want to immortalize the price in my videos... :) Best regards
@timstc9548 26 күн бұрын
quelle est la taille du guide merci
@TechIllusion-EN 24 күн бұрын
@timstc9548 Le rail de guidage mesure 100 mm de long. Mais il existe aussi un modèle de 150 mm ! Salutations
@engineer_alv 28 күн бұрын
great, I ordered mine yesterday to replace a compact impact wrench that was a hit or miss when doing tire rotation and suspension work at home.
@TechIllusion-EN 27 күн бұрын
@engineer_alv Thank you very much for the feedback and support of my work! I'm delighted that I was able to make your purchase decision easier with my video! :-) Best regards and have a nice weekend
@Sir-Kay 28 күн бұрын
So, it means when I install a disc that says clockwise, I can't press the reverse button without having to stop the machine & change the disc's rotation position right? basically flipping it over.
@TechIllusion-EN 27 күн бұрын
@Sir-Kay Yes, that's right! With some cutting discs, for example for stone (i.e. diamond cutting discs), there is a predetermined direction of rotation! In this case, you should therefore not run the device in reverse 😊👍🏼 Best regards
@Sir-Kay 27 күн бұрын
@@TechIllusion-EN So, in other words, when the disc says rotate forward, we should only let the machine spin in that direction and when the disc doesn't say anything, like metal & wood cutting discs etc it's safe to spin the machine in either direction, is that correct?
@TechIllusion-EN 24 күн бұрын
@Sir-Kay yes, thats right! :-)
@Sir-Kay 24 күн бұрын
@@TechIllusion-EN Will this thing take the much thicker sanding disc for metal pipes or there's only enough space for the generic thin metal cutting discs?
@TechIllusion-EN 21 күн бұрын
@Sir-Kay You probably mean a roughing disk! This should not be used on the device...
@chaoyangnz 28 күн бұрын
Is the head replaceable?
@TechIllusion-EN 27 күн бұрын
@chaoyangnz This will certainly be possible, but is probably quite costly, as the motor is installed in the head of the machine! Best regards
@krystian8508 29 күн бұрын
Nice vid as always 👍. I have Bosch and Dewalt 76mm version and these are really good tools. Dewalt has an additional feature to go both forward and backwards, it sometimes help to direct the stream of sparks to a suitable direction. However the feature I look forward to in those small grinders would be a speed control options. I could gladly use these to grind, not only to cut, but they are too aggressive with such a high rpm. Speed control would be a pretty cool feature here.
@TechIllusion-EN 28 күн бұрын
@krystian8508 Thank you krystian for your praise! I'm glad you like my video! Also, thanks for sharing your experience! You're absolutely right. The speed of these small mini angle grinders is so enormous that it's almost impossible to grind with them. A speed control would be really great :) Have a nice weekend
@erickdestroyer1569 29 күн бұрын
Nice review
@TechIllusion-EN 28 күн бұрын
@erickdestroyer1569 Thank you very much for your praise! I'm really pleased that you like my video! 😊👍🏼 Best regards
@jaydenktan3548 29 күн бұрын
Thanks for the video..looks.can be deceiving. 185 has a faster velocity than 186. Your analysis is very.accurate. 185 is the best of those 2.
@TechIllusion-EN 28 күн бұрын
@jaydenktan3548 With pleasure! Thank you for your praise and support of my work! 😊👍🏼 Best regards
@dasaidproabisai3119 Ай бұрын
Pretty good review! Thanks! 🤠
@TechIllusion-EN 28 күн бұрын
@dasaidproabisai3119 thank you very much for your support! 😊🙌🏼 Kind regards
@ivanpanayotov1702 Ай бұрын
can the mower be used without 4G of Wi-Fi?
@TechIllusion-EN Ай бұрын
Yes, the internet connection is only required for setup. The mower will then run without the Internet. But you can no longer access it remotely. :-) Best regards
@aussie8114 Ай бұрын
I love my blowers. All 18 volt. Got a small one for the car, a big one for the garden, and the vacuum blower to suck up the leaves.
@TechIllusion-EN Ай бұрын
Thanks for the feedback! You're in a really good position with that! Of course, I don't see any need to switch to a different system. The 18V system is more than sufficient if you have enough power :) Best regards
@streetbeastinc Ай бұрын
Can i juat cut with it myself that is using the app as a remote
@TechIllusion-EN Ай бұрын
@streetbeastinc I'm not at all sure whether this works with the Navimow...🤔 This is definitely possible with the Luba and Yuka! 👍🏼 kzbin.info/www/bejne/onrXlKOem66GpNk kzbin.info/www/bejne/eV7IamyZbZiXipo
@ccsinstalacoeseletricas8191 Ай бұрын
Excelent review
@TechIllusion-EN Ай бұрын
@ccsinstalacoeseletricas8191 Many thanks for the praise! I'm really pleased to hear that you like my video! :-) Best regards
@drewsprinkhuizen9721 Ай бұрын
is the bit it takes skinner then the old model? i had a different brushless makita collated witch is similar to the hilti and the bit seemed too small for screws and would slip
@TechIllusion-EN Ай бұрын
@drewsprinkhuizen9721 Hmm, so I didn't have the problem that the bit jumps over because it should be thinner...🤔 Otherwise, you can also buy the long bits for little money! :) Best regards
@simesimicevic8713 Ай бұрын
the makita and the bosch is the same price on amazon right now(118 euros) i have batteries for both platforms. Which one whould you pick? i think that the makita is the better option.
@TechIllusion-EN Ай бұрын
@simesimicevic8713 Yes, I would make the same decision! The Bosch angle grinder is smaller and more compact, but it also has less power and fewer features! I would go for the Makita if I were buying a new one. :) Maybe I can record a comparison video on this! 🤔👍🏼 Best regards and thanks for the support
@simesimicevic8713 Ай бұрын
@@TechIllusion-EN Thanks for the reply.Yea that would be a nice video.
@TechIllusion-EN Ай бұрын
@simesimicevic8713 with pleasure! I'll see what I can do :) Best regards
@ccsinstalacoeseletricas8191 Ай бұрын
Interesting, i have the Dub186 one. But I'm thinking about buying the 36v, i am here to see how much gap is between them
@TechIllusion-EN Ай бұрын
@ccsinstalacoeseletricas8191 Many thanks for the feedback! I hope I was able to help you with my video! 😊👍🏼 Best regards and thanks for the support
@suphotdiy2645 Ай бұрын
Where I can by it ?
@TechIllusion-EN Ай бұрын
@suphotdiy2645 you can find the current prices to support my work below the video in the video description! :) Best regards and thank you for your support
@danymitehazard Ай бұрын
Impressive
@TechIllusion-EN Ай бұрын
@danymitehazard thank you very much for your feedback! :)
@Dirtycracker Ай бұрын
Where would i start to look for this procore battery and item number f or it? Great video on the radio.
@TechIllusion-EN Ай бұрын
@Dirtycracker Thank you very much for the praise for my video! 😊👍🏼 You can find the links to the radio and the batteries on Amazon below the video! :-) Best regards and thanks for the support
@JabberMunson Ай бұрын
Do they inflate car tires?
@TechIllusion-EN Ай бұрын
@JabberMunson No, this is not possible! 😊 There are battery-powered compressors for this purpose, some of which I have already presented. Here is my video recommendation: kzbin.info/aero/PL83qYMCM7FesjkJg0XJJKUizQUZGqTjud Best regards
@Tony_Montana1 6 күн бұрын
глупый вопрос
@pat0691 Ай бұрын
The app is only in German language ??????
@TechIllusion-EN Ай бұрын
@pat0691 No, the app is available in many different languages! The language can be adjusted in the settings! :) Best regards
@ramanjanAnantapur Ай бұрын
Show me prises
@TechIllusion-EN Ай бұрын
@ramanjanAnantapur you can find the current prices to support my work below the video in the video description! :) Best regards and thank you for your support
@rtang10005 Ай бұрын
Thank you for this video. Just bought the DCD999 and excited to see a practical test.
@TechIllusion-EN Ай бұрын
@rtang10005 With pleasure! 😊👍🏼 I'm glad you enjoyed the video! Thank you very much for the praise and for supporting my work! :) Best regards
@chrisharrison6220 Ай бұрын
Thank-you for the video, much appreciated and I understand the effort you have gone to in employing a voice-over. All good. Please could I trouble you with two questions. 1. Do you have experience of the vacuum function blocking, eg vacuuming up twigs instead of leaves? How easy / hard is it to remove the suction tube to unblock it? My current leaf vacuum is a complete pain-in-the-**** to unblock and I am hoping that this is much easier. 2. How good is the vacuum function when the leaves are not as dry as the leaves in the video?
@TechIllusion-EN Ай бұрын
@chrisharrison6220 Thank you very much for the feedback and appreciation of my work! That makes me very happy! 👍🏼😊 The suction pipe is not as easy to remove as I would like, you have to loosen the small screw. Once you've done that, you can get to the suction and shredding turbine quite easily and remove the blockage. The appliance can also cope with damp leaves, but the suction progress is naturally slower as the leaves are heavier and stickier... Best regards
@chrisharrison6220 Ай бұрын
Thank you, that's very helpful
@TechIllusion-EN Ай бұрын
@chrisharrison6220 you're welcome! Happy to help you :)