Matt should consider switching tire dressing. Having to wipe tge tire down with a towel is wasting a good towel, and you're also wasting time when you could be using something like ADS Tire+ as a dressing thag doesnt require a wipe down after application.

Can you use these on any bottle that they will fit?

Worst possible material to use in vehicles.

$800 for a 3 inch polisher is insane lol. Just bought 2 new 24v flex polisher the rotary and forced rotation and both were cheaper than that little machine. I own both of rupes new hlr polishers and those are quiet maybe rupes could put that gear set tech from those into the mini 3 inch. The mirca looks like a $150 tool with tons of markup from the cheap looking charger and battery design and even the packaging. The margins have to be killer.

I want to order you’re 2x4 lights for my garage my garage is 25’ with by 35 depth I was going to go with 6 2x4 lights but not sure that will be enough height of the ceiling is 15’

Hey guys please I have one question I can't seem to figure out anywhere. I am just about to order a full wall mount pressure washer setup but I can't figure out if I should get the k1322ts or the k1622ts? What is the difference?!!

What parts do you need for the bottom elbow?

I don't understand how they can sell them so cheaply.

Murr is that you?

Priming it on the vehicle do you prime on a low speed or fastest speed

What size nozzle

can you mix and match brands for couplers and plugs? or If you have a mosmatic coupler does it need to be a mosmatic plug.

I actually don’t like the way the bristles are stiff and not dense enough…it creates way too much splatter every time you pull it out with the scrubbing motion so you end up with brown dirty spots all over your body/clothes

Literally shoots water all over car with first shot! lol

How does this compare to Gyeon Rim? Its also only requires one coat. Thanks.

cool

Is it only available in the blue color? A black option would be nice

Thank you for creating a scent free product! The industry is saturated with scented detailing product so this is literally a breath of fresh air.

Was gunna buy until I got to shipping. Get ready for it.. $109 to ship to Australia. Appalling.

What the best orifice size for ar630? I'm currently using 4.0 and 4.5 for 25° angle nozzle and 1.25 for foam canon.. Can it go lower and higher then that or the pump and motor will breakdown faster.

Thanks mate, very informative and straight to the point 💜

I want to use this on my stove. What do you think?

Can use it for thicker stuff though

Not at all impressed with Matt. I know lots of fanboys are. But he is so opinionated I find it disappointing for a business man.

Nice video, I use 1:128 in a pump sprayer and mist the entire car as a first step in washing. Use a little bug remover if there are bad spots. Let sit 5 minutes, blast off with the pressure washer. There is not much left to clean off after that, it encapsulates dirt, pollen, etc. And a capful in 1/2 gallon of water covers the entire car thoroughly.

Where are those valves from? Where can i buy them?

So the stubby has a male qc. The pro hoses you sell have one female and a male qc. So the male end of a korbra jet hose has nowhere to plug into. Is it ok to hang a female qc on the active outlet?

How do I get the kranzle do pressure up I just set mine up got power and water but nothing my

There's no mention of the power washer rate. A white nozzle on a 1000 PSI 5 lpm power washer will be much weaker than a white nozzle on a 8000 PSI 20 lpm power washer. The first would rinse the car and the second could damage the car. Isn't it so?

Beginner here. After this process, do you spray the area of vehicle with water, or wipe the area with a microfiber towel?

No issues with any of the electrical connections?

I REALLY want Veloci to make Prima m22 connects! The Prima is so much better than the regular MTM fittings. OG, what do you think the chances are they consider expanding the lineup?

Can Green Star be use, properly diluted, on glass?

Probeer je mij te vergiftigen?

You can't do male to male or female to female. Fittings have more sense than humans

Just bought a set for my f80 M3 and they are too small for the bucket seats. Pretty annoyed

Does kranzle use m22 14 or 15

I have a 4400psi and 4.2gpm PW. Would the kickback be too much for these short guns?

If you think that 3 inch is good... Try ordering a 5 inch mirka overseas

Whats the scent

Can you drill a 1/2 inch or 3/4 inch plywood backer board on the outside of the drywall and into the studs to the same effect or would you say it's less strong than cutting open the drywall and properly blocking?

"Chances are you have some McKee's N914 in your cabinet already..." Hmm...what cabinet would that be?

@ObsessedGarageShorts which would you recommend between the k1622ts and k1322ts?

Senco grays. Best ever, hands down.

Bro let me send you a picture of my garage and hook me up with a design

Nice video but more is not better in regards to wrapping pipe fittings with Teflon tape. Step 4: Tightly wrap the tape clockwise, but without pulling too hard such that the threads are strained. With each full rotation of the pipe, move the PTFE Teflon tape down so that it overlaps half of the previous layer. Step 5: Wrap three full rotations and ensure the tape is flat to the surface without any gaps. It is important not to overwrap your pipe - too much thickness can prevent a tight seal - so stick with three full rotations to start. 5-7 wraps as you called out is way too much and causes the excess tape to ball up in the threads and keep you from getting enough threads to penetrate the fitting. Another advice is Always try to keep the tape from the end as to not allow pieces to break off and plug small holes in pressure washing tips.

I have a 3D graphene, i can use reset fourtnightly basis because i park my car outside my house. And i dont have a garrage. How would you recommend maintaining 3D graphene….😢

What the correct pressure psi/bar to wash cars with a kranzle ?

Was the interior cleaner changed? The link shows griots

Two questions that would be helpful to add: 1. The EGO batteries are called "generation 1", "generation 2", etc. What do these designations mean? The fuel gage is related to this but is there anything else? I have to imagine the the built-in controller improved and has some slight differences in operation. 2. The main issue of EGO batteries is the price. I have an EGO mower and while I am happy to have it, replacement batteries are so expensive that I often regret buying it. The 12 AH battery is currently selling for $600! When I need to buy a new EGO battery I figure out which provides the most AH/$ (or the lowest cost for capacity in $/AH). How is the price of Gen1 vs. Gen2 vs. Gen3? BTW, I recently was so fed up with EGO battery prices that I sent an old 7.5AH EGO battery to get the cells replaced. This is not a huge savings, but I feel forced into this option.