Came out well but gotta work those edges more with the sand paper
@christinahaddrell211010 күн бұрын
Maybe transform this overpriced microwave oven on wheels into a Ram or F250, or anything that’s a real truck.😅
@carltrano132513 күн бұрын
Project farm is a great channel, with that said it’s always great to get the real deal from a professional as well.👍💪
@chrisginoc18 күн бұрын
Why iron remover after the first wash? Shouldn’t it be iron remover, rinse off, then foam, rinse off, then wash?
@corkscrewman18 күн бұрын
You guys do great work
@RestlessSeoul22 күн бұрын
What does something like this cost?
@a124as28 күн бұрын
Soft car
@Henry_olson_music26 күн бұрын
What car do you drive?
@stebin23 күн бұрын
@@Henry_olson_music Bro has a pfp of a bus stop. He doesn't drive
@Henry_olson_music23 күн бұрын
@@stebin exactly
@natthaphonnoble2407Ай бұрын
If they made this a two door!!!! I’d request you to cut in half and shorten it slightly and weld the back doors shut and turn it into a coupe!!
@vicgill1980Ай бұрын
That’s a lot of work!!! Respect
@willmtaylorАй бұрын
His channel, as I'm sure you know, is focused on off-the-shelf, easily purchasable consumer products found on Amazon or big box stores, which explains why he chose the products he did.
@nohandletobehadАй бұрын
😂 resume to clean a car
@bubaks2Ай бұрын
Whats the pay?
@深見功次郎Ай бұрын
コルベットかっちょええ〜
@yoink5592Ай бұрын
Shouldnt be using your mitt in circular motions
@nickrounsavilleАй бұрын
Was just about to blast this comment
@yoink5592Ай бұрын
@ hahaha
@Pasiya0224Ай бұрын
Chevrolet corwatte C8
@TheLopezes-pw1neАй бұрын
Like your shop advertises or promotes, these products are not technically “ceramic” coatings; lets just be honest and be fair to consumers about these. In fairness to Todd, he only states what these products say as advertised, again just what your shop says or promotes. Come on man, its business you are protecting too.
@benjaminackley14042 ай бұрын
For applying a wax like collinite, do you need to use a any sort of surface prep first besides a clay bar? ( obv iron/tar if needed )
@rmika992 ай бұрын
Ceramic or graphene and depending on your pick, which brands are the best iyo?
@carterblanc81912 ай бұрын
What did you charge?
@coachrobwille41763 ай бұрын
Right on
@Boodieman724 ай бұрын
He's not testing professional level products.
@hermancm4 ай бұрын
Any recommendations on iron remover?
@TyTy-us4xt4 ай бұрын
Wtf
@CarswithJDUB5 ай бұрын
Thanks for covering my truck up😅
@fortworthautodetail5 ай бұрын
Of course!
@x_Heffe_X5 ай бұрын
Best way to remove hybrid solutions and put a new coat on? I’m one of the dummies that assumed more was better and put too much on so there are streaks ect, I’d like to remove it all, clean it proper and apply a new coat. Can you please give me the steps and products to use? Clay bar, iron remover ect? Thanks in advance!
@connorcoombs59285 ай бұрын
Griots foaming surface prep. Wash with that, then do a normal wash. Decon and wax
@JohannGambolputty225 ай бұрын
A new drinking game: Every time F11 is mentioned and he laughs, take a shot.
@fortworthautodetail5 ай бұрын
I would pass out.
@khairulazizi59545 ай бұрын
I'm just wondering if you could make a tutorial videos step by step how the process works.. much appreciated
@fortworthautodetail5 ай бұрын
Love it. Definitely in the works but we have been so busy. We are getting ready to move to a larger shop so don't have an ETA but hopefully soon.
@harper75095 ай бұрын
You're gonna give back what you stole or go to jail for being involved in the Freemason Illuminati Epstein network.
@fortworthautodetail5 ай бұрын
I plead the 5th.
@prostyle16265 ай бұрын
The music sucks.
@fortworthautodetail5 ай бұрын
Thank you for the valuable feedback
@江军武-e9x5 ай бұрын
We are a cnc sourcely factory,if you in the automobile manufacture have need to use cnc parts,can you contact us ❤❤
@kevinmoore29296 ай бұрын
You HONESTLY think that they'll get a signal for DirecTV during a natural disaster?
@fortworthautodetail5 ай бұрын
Never been in a natural disaster, have you?
@cliff46956 ай бұрын
So what did they do with the remaining 1 million dollars? Call it a $100,000 base truck, cab and chassis. You have a glorified camper shell, lift kit, wheels and tires. Even if I grossly over value those, that's another $100,000. The tech could be really expensive but once again I'll grossly over it at another $100,000. So my question remains, where's the other million at??
@fortworthautodetail5 ай бұрын
Haha good point.
@kevinmays19086 ай бұрын
Still ford junk
@fortworthautodetail5 ай бұрын
What ford hurt you?
@kevinmays19085 ай бұрын
@fortworthautodetail I think they fired quality control after covid
@SanJuanLaBordll6 ай бұрын
This is gas
@fortworthautodetail5 ай бұрын
Facts
@WilliamCondon-v7r6 ай бұрын
Worthless weapon of mass destruction, thatcontributes to karmic retribution.
@fortworthautodetail5 ай бұрын
well then...
@jonandrews95996 ай бұрын
I wonder what MAJOR city is selling this 1 to finance the newest version.
@fortworthautodetail5 ай бұрын
truth
@MichaelAguilar-vj2nr6 ай бұрын
1.3 Million Dollar 💵 Rip Off. It's similar to the 52 Million Dollar Homless Shelter in Victorville, California. Converted Storage Containers on 6 Acres. The Dollars 💵 Don't AD UP !!
@fortworthautodetail5 ай бұрын
truth
@VixxyFishy6 ай бұрын
noice and shiny. You earned a sub.
@fortworthautodetail6 ай бұрын
Hey Let's GO!!! Appreciate it
@Thattexaslife6 ай бұрын
cool video, the porno music just kind of throws me off
@fortworthautodetail6 ай бұрын
Lol got it. What kind of music do you prefer?
@sewj80466 ай бұрын
It has always puzzled me why detailers choose practically new cars to display their detailing ability. I've always thought the newer a detailer can make an older car look is much more substantial.
@fortworthautodetail6 ай бұрын
True. The before and afters on older vehicles are great, but most people don't want to spend the money on their older vehicle. Most of our high end jobs are new vehicles, because the client just got it and wants to protect it.
@MattUnderscoreMiller6 ай бұрын
What products are essential?
@fortworthautodetail6 ай бұрын
This is a rabbit hole of a question and probably needs a separate video. If you are talking about coating wise, you need to wash, decon, and coat the vehicle. So at a minimum you need a car wash shampoo. Then an iron remover, a clay bar, and clay lubricant. Ideally I would like a polisher, but a polisher is not necessarily essential. You could make your own IPA and then obviously whatever coating you want to use. So that probably looks something like: 1.) Adams shampoo $14.99 2.) Carpro Ironx $23.57 3.) Chemical guys clay luber and clay bar $21.99 4.) Carpro cquartz coating $82.99 Total: $143.54 You would also need some adjacent tools like a pressure washer ideally and some microfiber towels, but just strictly speaking product wise this would be a starting point. Again probably needs its own dedicated video to explain a lot more.
@MyGuyKirby6 ай бұрын
Project Farm has a handicap as he is making quick video to a very large DIY audience. I avoid the use of 'wax' as a description as many older DIY have the concept of traditional wax which is time consuming to install and does not last (Texas heat kills). Sealants and ceramic infused work far better but not as long as a true ceramic 'COATING'. Thanks Austin for making this video and giving a professional commentary, hope more view and understand the concepts. Key take away is DIY'ers need to is that keep the surface clean with good wash methods and frequent use of light protection helps in the long term.
@fortworthautodetail6 ай бұрын
Appreciate the feedback!
@shawnwright2407 ай бұрын
Loved hearing your thoughts on this. I tried the turtle wax hybrid solutions but can not say I am super happy with it. So the obvious questions is - what do you suggest for a 2013 Black Honda accord with high miles but has been garage kept most of its life? AND - I already clay barred and applied hybrid sol. so should I remove that and clay bar again to apply your suggestion? Thanks
@fortworthautodetail6 ай бұрын
Depends on how crazy you want to get. Do you want a coating or do you want to stay with a wax?
@shawnwright2407 ай бұрын
Loved hearing your thoughts on this. I tried the turtle wax hybrid solutions but can not say I am super happy with it. So the obvious questions is - what do you suggest for a 2013 Black Honda accord with high miles but has been garage kept most of its life? AND - I already clay barred and applied hybrid sol. so should I remove that and clay bar again to apply your suggestion? Thanks
@JohannGambolputty225 ай бұрын
Did you watch until the end? He suggests Carpro Cquartz. If you want to apply a new coating you'll have to strip what you put on (Strip wash, iron remover, Isopropyl alcohol) but if you just did it a clay and polish probably won't be needed.
@iPhoneAppReviewer3 ай бұрын
What didn't you like about the Hybrid Solutions?
@patrickgagnon96627 ай бұрын
The formulation of the ceramics in the sprays makes it not a wax ...no matter how many times you say it is , a little full of yourself buddy .
@fortworthautodetail6 ай бұрын
I think we are agreeing here haha. I'm confused.
@patrickgagnon96626 ай бұрын
@@fortworthautodetail You called spray ceramic wax ...it is not .
@fortworthautodetail6 ай бұрын
@@patrickgagnon9662 Correct. I was just talking in terms of performance I think its more helpful for people to think about ceramic sprays as wax rather than as a ceramic coating.
@patrickgagnon96626 ай бұрын
@@fortworthautodetailThat is better wording....ceramic easier to maintain without buildup like a wax , that is a big difference .
@ericmann79452 ай бұрын
Great video, I learned a lot. I clayed, iron-x'd, machine polished with Turtle Wax hybrid graphene flex compound ,panel prepped, coated with Turtle Wax "to the max" graphene liquid wax on my previous daily driver (blue Honda Pilot) . It came out decently but would like to do an actual true ceramic coating on my newer daily driver ( blue 4runner 5th gen). Thanks for great explanations , will definitely help my next project!
@jima79257 ай бұрын
Arrogant.... and.... solvents dont dissolve (11:30)
@fortworthautodetail6 ай бұрын
Love you to. And correct, that is my bad. What I was more getting at is when you are leveling you are wiping away the carrier solvents of the ceramic coating.
@lrlforfun7 ай бұрын
Most of that stuff is S I o2. Iron first, then clay, then correct (if necessary) and polish.....check. The Turtle Wax? Excellent for a quick detailer product. Cera Koat? Good for matt plastic trim. F-11? The marketing is ominous and it's crap. Advance Graphene? Dunno, Adams is a quality coating but at a buck-n-a-half it's really pricey. Slickness? Good for customer smiles at the time of delivery. I'd much rather see legit ceramic coating products go head to head.
@fortworthautodetail6 ай бұрын
True. Yea that's why I like the one that Chicago Auto Pros did.
@lrlforfun6 ай бұрын
@@fortworthautodetail Thanks, I'll look into that vid. I have several cars I can coat and I have BC-7 in mind but I just wanna make sure it's got the protection. Protection? My wife was 42 when my son was born so it can be fleeting.
@MrKennyanders7 ай бұрын
My super affordable Black Rhino Graphx is at about 2 years