Markus Schmidt

Пікірлер

@MontageHDr 29 күн бұрын

Thanks for published video ✌👍

@mtf8_music 7 ай бұрын

Going through this process step by step has been absolutely amazing and has given me much more insight into the mixing process as a whole. Thank you so much for publishing this content. Probably the single greatest video on KZbin I have ever interacted with.

@mtf8_music 8 ай бұрын

Hi. Thank you for providing this. I just came across the video and am going to spend a bit of time recreating the track from scratch in order to follow along and learn some things related to sound design and mixing. I'm curious why you used the Multiband Limiter on the master output rather than the Limiter? Heading over to read the Calf documentation to see if I can figure it out.

@boomshop 8 ай бұрын

The short explanation: Calf Multiband Limiter splits the signal into four bands and limits them independently. This has less audible impact on the signal than using the wideband Calf Limiter.

@mtf8_music 8 ай бұрын

@@boomshopBrilliant!

@dawindjammer 9 ай бұрын

Ich such nen Song von euch, aus 2006 meine ich. Part of the lyrics: hast dun problem mit dem scheiß aussehen, dann guck mich doch mal an ich bin gelber clown. Was war das nochmal und wo kriegt man diesen track, ich zahl auch.

@boomshop 9 ай бұрын

Hey Dave, das ist "Bounce With Us", findest Du auf Jamendo.

@dawindjammer 9 ай бұрын

@@boomshop stimmt, bounce with us!

@boomshop 9 ай бұрын

@@dawindjammer Mein Lieblingstrack von uns <3

@alplayxdpereehal Жыл бұрын

мирослав?!??!?!?! не знал что ты решил музыкальную группу основать

@doctormaddix2143 Жыл бұрын

Hast du die Sitzbank selber bezogen/aufgepolstert? Oder hast du das machen lassen?

@boomshop Жыл бұрын

Die habe ich beim Sattler in Braunschweig machen lassen.

@MaxwellBenson80 Жыл бұрын

Thank you for this comparison!

@RyanWilson876 2 жыл бұрын

Leo Vince small 💥💥💯💯

@SmalltimR 2 жыл бұрын

That LeoVince x3 long sounds like Caviar!

@aXisofmusic 2 жыл бұрын

Amazing stuff! Thank you!

@saemson94 2 жыл бұрын

Hallo Markus, ich hab mir das Video jetzt bestimmt 25 mal reingeföhnt und lache mich jedes Mal kaputt. Ist mit Abstand das beste DR Auspuffvideo das da draußen rumschwirrt. Ich hasse solche Handyaufnahmen „Ey zieht euch mal rein was die Karre für nen geilen sound hat!“ - wie soll sowas gehen? Danke dass du den Aufwand betrieben und dir die Zeit genommen hast. Ich liebe solche Perfektionisten wie dich. Einmal richtig gemacht und das Problem ist erledigt. Werde mir definitiv den LeoVince holen. Zwar finde ich den Sound vom MSR ganz geil weil der noch bissl tiefer klingt aber nachdem was ich über die Qualität dieser Blechbüxe gelesen habe sehe ich im LeoVince die bessere Wahl. Dürfte ich noch fragen was für einen Krümmer du da dran hast und kannst du den weiterempfehlen? Gruß

@boomshop 2 жыл бұрын

Hey Simon, vielen Dank! :) JDen LeoVince fahre ich jetzt selbst, weil er einfach deutlich hochwertiger ist und mir aber der Sound auch besser gefällt. Lauter != besser imho. Der Krümmer kommt von Hessler Racing Team (dr-big-shop:de), es ist der HRT Leistungskrümmer. Ich bin mit dem sehr zufrieden, optisch sowie was die Leistung angeht.

@braule80 2 жыл бұрын

Ich war da und bin schwer beeindruckt von dem, was ihr da geschaffen habt !!!! Richtig geil !

@drummerworldyoutube 3 жыл бұрын

COOLIO

@marting169 3 жыл бұрын

hermoso

@svenstone1658 3 жыл бұрын

Ein Machtwerk. Ich bin schon ganz juckich auf die Fortsetzung..

@mathieulauga7304 3 жыл бұрын

Hi ! How do you manage to have a new DR650 in Europe with norms EURO X ?

@boomshop 3 жыл бұрын

Hey! They aren't sold in the EU anymore because of this. Additionally at least in Germany no new bike without ABS will get a registration. So the only possibilities (at least in Germany) I'm aware of are: 1. Get someone moving from e.g. Canada to the EU so the bike is declared part of the relocating goods. 2. Get an old frame and re-assemble all parts of the new bike to the old frame

@dphrenicyeah3688 3 жыл бұрын

Crazy.

@lucapalazzo8547 3 жыл бұрын

on Reaper, no GUI....:-(

@jeffpaxton9172 3 жыл бұрын

You're a funny dude!

@friedrichgeisel60 3 жыл бұрын

Servus ! Kannst du mir verraten was du beim LeoVince mit langem Killer neu am Vergaser angepasst hast ? Ich bin momentan an meiner Sp46 dran und hab aber nur den Endtopf mit original Lufi und Krümmer dran. Beste Grüße !

@boomshop 3 жыл бұрын

Hey Friedrich, sorry, ganz übersehen, Deinen Kommentar. Ich habe mir einen Flachschieber eingebaut, den ich habe vom Hessler bedüsen lassen (Hessler Motorsport, hat den weltbesten Shop für DR650). Funktioniert prima. Habe ein paar andere Düsen getestet, müsste aber eigentlich auf den Messstand damit. Läuft aber super soweit.

@goaheadmakeourdayscooterpe9644 3 жыл бұрын

Love the oversize mudflap.

@Michael-up3yb 4 жыл бұрын

Servus könntest du bitte den kennzeichenhalter verlinken?

@boomshop 4 жыл бұрын

Hey Michael, der Halter: amazon.de/gp/product/B00FEFWJDW der Reflektor: amazon.de/gp/product/B006BZDJVA die Kennzeichenbeleuchtung: amazon.de/gp/product/B00HVDSSI0 Aber eine dringende Warnung: die hat sich bei mir irgendwann auf der Autobahn abvibriert und mir beim Abfallen den Reifen aufgeschlitzt, ohne, dass ich das mitbekommen habe. Als die Karre anfing rumzueiern, bin ich runter von der Bahn und hab' die Schmiere angerufen, die haben mir das Ding dann vom Standstreifen gepflückt. Gab kein Nachspiel, ausser eben neuer Hinterreifen und den Stress wegen neuem Kennzeichen.

@Michael-up3yb 4 жыл бұрын

@@boomshop Danke!

@Michael-up3yb 4 жыл бұрын

Wo ist der dann abergerissen direkt bei der Verschraubung?

@boomshop 4 жыл бұрын

@@Michael-up3yb Ja genau, da ist halt nicht viel Material. Bisschen Rost dazu und *knack*

@paulopinheirosc 4 жыл бұрын

Why is it so hard to find superb didactic videos like this?

@darylj2617 4 жыл бұрын

@1:37 lol

@nvmcrider8475 4 жыл бұрын

What country requires a license plate that big? Good entertaining video.

@boomshop 4 жыл бұрын

I'm from Germany. In general, motor cycle license plates in Germany are way smaller these days but used to be that big in the past. In those days one had to have a *very* old motor cycle to get smaller plates, today it's the normal thing. So I had some discussions with authorities to get the bigger plate from past times :) Like it.

@nvmcrider8475 4 жыл бұрын

@@boomshop Ok, there is method to massive license plate madness.

@boomshop 4 жыл бұрын

@@nvmcrider8475 Well, I'd call it countercyclical ;)

@wolfgangbistekos4596 4 жыл бұрын

Hahaha ! Witzig ((-:

@eegoal 4 жыл бұрын

Wow I didn't know about jack keyboard. I've been struggling to find one for years

@WuKuVex 4 жыл бұрын

levince with dmalldbkiller sounded the best imo :) ist it possible to remove something from the stock muffler or something to make it a little more beefy sounding?

@misplacedcaper9662 4 жыл бұрын

Yep. The whole muffler. My old school vance & hines sport bike exhaust with custom db-killer/spark arrestor sounds better than all of these....

@eman4013 4 жыл бұрын

What sort of seat are you using in this clip? Comfy? Name and price? The stock seat is unbearable

@boomshop 4 жыл бұрын

It's very comfy. It's the original seat I brought to a saddler who put some new foam (much stiffer) and a new cover on.

@АнтонЧехов-л3б 4 жыл бұрын

Just Russian comment, nothing special Классная песня)

@jeroenb1821 4 жыл бұрын

I don't know what happened, but version 0.90.3 doesn't work properly. The audio samples don't loop anymore.

@jeroenb1821 4 жыл бұрын

I have used this plugin. It was pretty good, but unfortunately it is broken now :(

@bikewolf7455 5 жыл бұрын

Ich fahr den leo mit kurzem killer. Sobald die dämmwolle ein bisschen weg ist ist das soo schweine laut. Beim supermoto rideout bin ich immer der lauteste (und das mit killer) Alle fahren im abstand von 2m zueinander... immer wenn ich in den rückspiegel schaue halten die alle erstmal 30m abstand😂😂😂😜

@evergreendreaming3700 5 жыл бұрын

Msr sounded the best

@bikewolf7455 5 жыл бұрын

Believe me the leo is better. It starts to sing on high revs. Sounds like a motocross 450 with extra displacement then

@ronanrogers4127 5 жыл бұрын

I think all the vibrations made the T between the W and the F fall off...WTF?

@usta028 5 жыл бұрын

this is golden!

@PrimetimeNut 5 жыл бұрын

All sound terrible

@Graeme_Lastname 5 жыл бұрын

Can it get better than this ? Noob at this end. :)

@grzegorzbrzeczyszczykiewic1636 5 жыл бұрын

What daw are you using?

@boomshop 5 жыл бұрын

Ardour.

@grzegorzbrzeczyszczykiewic1636 5 жыл бұрын

@@boomshop ARdour seems like the best open source daw. Just a pain in the ass to get working

@MontageHDr 29 күн бұрын

@@grzegorzbrzeczyszczykiewic1636 Yes. Daw Ardour it's nice program.

@Racosz 6 жыл бұрын

The best plugins in Linux. I love the GUI design and the most important: the sound- Greetings from Bogotá, Colombia

@galeanoj2005 6 жыл бұрын

Ardour is a mess nothig work, all is dificult, you can not to delete a session, you can not to lisent the audio output, I hate ardour ...he

@boomshop 6 жыл бұрын

Probably you should watch the video: everything works like a charm, handling is obviously easy and if you don't hear the audio Ardour produced in this mixing session - maybe your hardware/driver/os is broken?

@galeanoj2005 6 жыл бұрын

I do not know, I use Bitwig linux , coolpro in wine, audacity linux and all run ok, I know to manage jack and the conections , I am going to watch it, thanks Markus. I do not found it hehe, I watched learn midi kzbin.info/www/bejne/a5WyZpSaeptpl7s the configuration of midi is a MESS and do not run I wil try in the future, I hate the small letter I can not to see nothing, I hate ardour the elemental thing should be to control the size of letter, and has configurations with words in vertical way and small font is horrible !!! I found scaling factor... Eureka I wil follow searching.....I finally run midi with external Yoshimie I will try with Calf...but I used calf as external host , as vst is for audio I beleive, and for midi we need to use it external because the sound is not produced by ardour...that was my wrong I am recording midi not audio. well I decided to start using ardour calf will be good for audio tracks. Thanks.

@boomshop 6 жыл бұрын

Which version of Ardour do you run? Especially MIDI improved a lot in the last versions, current version is 5.

@galeanoj2005 6 жыл бұрын

I am using 5.12 the last version, yestearday I upgrade, and I just learn to adjust MID and now as I mention is running ok and for now using calf as host no vst. Thanks.