The modified one is jetted and setup to run open carbs, my yellow ice racer is as well, the stock 650 I still run the airbox
@xblfann7514 күн бұрын
you didn't have any trouble wiring in the 2019 cab lights? I need new ones and i like the updated look on those! i've got an LBZ just like yours minus the chrome strip on the sides
@Mischiefmotorsports14 күн бұрын
Hardest part was running the wires, have to drop the headliner, visors and overhead console, run the wires across and down the pillar but just taps in to your light fuse inside the drivers door. Cutting the holes in the roof was very nerve wrecking, just measure a lot and take it slow
@dennybarlau8065Ай бұрын
First time watching your show, what lake are you on? Good content!!! Maybe lake Minnetonka?
@MischiefmotorsportsАй бұрын
This was on biglake/mitchell lake in biglake MN, but I do hit quite a few lakes in central and northern MN. Minnetonka would probably be definitely too wavy for this little boat
@dennybarlau8065Ай бұрын
@Mischiefmotorsports I use to have a Yamaha jet boat, I know what you mean Early in the morning, was a lot fun Smooth as Glass I lived on lake Minnetonka, wish you the best for next year Denny from Minnesota
@mauricehall8286Ай бұрын
That’s what she said
@alexsoto1854Ай бұрын
Did you need a tune
@xxkinetikxx2 ай бұрын
This thing is SICK!
@herrprepper20702 ай бұрын
I’m amazed at the number of Duramax trucks that never haul more than a 10 pound bag of cat food. My 2009 3500HD Duramax is a ranch work truck. 205,000 miles, everything still within factory specs. Still original brakes. Nothing but AMSOIL products. 24mpg at highway speeds after the delete. Change oil once a year with lab analysis of the oil. Never an issue. Everything bone stock except the delete. Two other diesels… 1984 K2500 6.2 with 258,000 miles on it. Bought new… now my livestock water hauler. Used good oil… dual filtration system… never put in gear until engine warmed up… Power Service in every tank of fuel. 2007 Grand Cherokee with Mercedes 3.0 diesel. Perfect in every way.
@Mischiefmotorsports2 ай бұрын
What point are you trying to get at here? The truck in this video I haul a 36 foot gooseneck quite frequently and also a 28 and 20 foot bumper pull equipment trailers at least once a week, just because it has wheels on it doesn’t mean it isn’t worked
@terrykhemraj32552 ай бұрын
Nice lbz bro, how much does it usually cost to get the trans built
@Mischiefmotorsports2 ай бұрын
Fully built trans with triple disc converter, billet shafts, and then having the shop do the T case and new U joints while they were there ran me just a little under 10k. Little overkill of a drivetrain but should definitely hold up well for more power in the future
@terrykhemraj32552 ай бұрын
@@Mischiefmotorsports sounds good, thanks for the info
@kylef98092 ай бұрын
sick build brother woukd love to see more if jt
@Mischiefmotorsports2 ай бұрын
Thank you! Hoping to have 1 or 2 more videos made before it goes away for winter
@BernalEmmie2 ай бұрын
079 Thiel Shoal
@GaryLewis-z9g2 ай бұрын
Moore Amy Wilson John Thomas Amy
@demetriuspalmer29922 ай бұрын
Damn that's a gorgeous LBZ man, I'm an OBS Ford guy and a 1st and 2nd Gen Cummins guy myself, but I respect any great diesel pickup build.
@Mischiefmotorsports2 ай бұрын
Same here! Thank you I really appreciate it
@yngvardharjo37042 ай бұрын
Seat belt dick.
@landonsrandomstuff92342 ай бұрын
Yo i got question how much does a truck like that run in price
@Mischiefmotorsports2 ай бұрын
To build it to this caliber or buy one already done?
@neftalicardenas921018 күн бұрын
@Mischiefmotorsports id like to jump in on this and also ask if you could do a price build breakdown.
@JanWaszczuk943 ай бұрын
nice rig man
@Mischiefmotorsports3 ай бұрын
Thank you I appreciate it!
@JacobBailey-on8vl3 ай бұрын
Shit that’s a wicked truck man
@Mischiefmotorsports3 ай бұрын
Thank you!!
@anthonystokes20683 ай бұрын
Nice truck man. how did the headers fit in there, guys have told me only shortys will go in without having to remove a bunch of shit on the drivers side. I have a 94 Silverado Ive been restoring.I started with the frame and done a lot to it since but is that back sliding rear window stock. Mine got busted out somehow even with a headache rack on it but I cant remember if it has 1 or 2 pains that slid in there, you have 1 in yours I see. Damn nice truck.
@Austin-2343 ай бұрын
What size was the tunnel before you did the tunnel cut
@Mischiefmotorsports3 ай бұрын
153”
@williamogden55833 ай бұрын
Think I can run the setup with no lift and some cutting?😂😅
@TheZlash5 ай бұрын
Great video!🎉
@TheZlash6 ай бұрын
Yeah! Would love to see more of the boat and stinger!
@Mischiefmotorsports6 ай бұрын
I’m actually in the process of making another video with it right now
@valley8one87 ай бұрын
I have a 70 Impala 350 how much would it run me to put a cam kit
@larrybrooks90689 ай бұрын
i prime my lifters also!🤔😟
@a3_Beats9 ай бұрын
Thats actualy so sick
@noahjones851010 ай бұрын
You got an update on cooling?
@Mischiefmotorsports10 ай бұрын
I do, rode the sled last weekend and only had to take the trail 15 minutes to and from our spot but with scratchers down the sled stayed cool right at normal operating temp!!
@noahjones851010 ай бұрын
Thanks for the update, probably going to do the same thing with my sled this weekend. I’ve heard you don’t need a kit but you’re right I havet seen a single video of anybody doing it. What did you end up doing with your excess wires underneath? And did you notice a difference riding with the tunnel cut?
@Mischiefmotorsports10 ай бұрын
Only thing I’d advise different is maybe leave that rear 2 inch piece out, I landed off a jump and a paddle from the track broke my tail light, but I added 30 psi to the rear shock and it didn’t happen again, so just watch out for that, don’t want to have any lugs catch and rip off. For the tail light excess wire I just cut a few inches out and then soldered and taped it. I also did notice a difference riding, sidehiling there’s definitely less drag in the snow, and right away I wheelied over backwards😂
@noahjones851010 ай бұрын
Thanks for letting me know about the tail light I’ll make sure to put it up top. I’ll let you know how it turns out for me. Thanks for the help!
@richcollins513 Жыл бұрын
Cmon man you left out every detail and showed us only one step of MANY
@johnsepulveda650 Жыл бұрын
Useless ass video
@skullthrasher69 Жыл бұрын
Has base model truck, complains about it not having features
@dsciarrino3663 Жыл бұрын
The best money can buy 👌
@a3_Beats9 ай бұрын
So true
@erlygonzalez7742 Жыл бұрын
Have you thought about putting on the hi beam mod so that the low beam stay on when you turn on hi beam
@skeezah2648 Жыл бұрын
Nice just don’t include most of the stuff you did in the video where we all tryna figure out wtf to do 👍
@keepitsimple7042 Жыл бұрын
Too much face too little truck!
@alanm3079 Жыл бұрын
Cool obs
@SamuelSandoval21 Жыл бұрын
I’m debating in putting this size on my 85 long bed
@brodijones2 жыл бұрын
Funny, I just seen this truck for sale on Facebook
@logantalley36702 жыл бұрын
my 95' has squishy brakes, and i think a total of 3 cup holders
@ct17622 жыл бұрын
get a 22'' chopper, block off a couple intake passages and jack the motor up in 1/2'' increments until you find the sweet spot. that crappy aluminum prop isnt doing you any favors. also, never rev it up on the hose like that great way to snap a reed or 3. if you do, use the throttle neutral detent so you give it some timing, not just fuel. cheers.
@andronclock19 ай бұрын
Wow I have seen this advice posted on FB groups for months now, only now did I realize why they say this. You are keeping idle timing but getting higher revs that way, thats why it might blow. Thanks for the information mate!
@PremiumColin2 жыл бұрын
Love it man! I just put my '78 Stinger 75 on my 1432 sea-nymph... flatbottom jon... lol 😄 it screams!
@adamschlueter24952 жыл бұрын
What’s the size on the rims and tires
@luisbravo4952 жыл бұрын
Nice truck and rims, we're you buy the rims and how much please
@ricardomoctezuma94482 жыл бұрын
Were U get the head light what the name and part number
@AeroSS872 жыл бұрын
My 14' Imperial is only seeing 30-33mph with the johnson 75 short shaft. What kind of speed are you getting?
@ct17622 жыл бұрын
all in the prop and setup
@chrisjohnson-qh9tv2 жыл бұрын
Hood scoop real or fake
@jeffbegay97712 жыл бұрын
Did you put a leveling kit on your truck front suspension? What did you use?
@codyadams24482 жыл бұрын
It’s easier to remove the whole dome light assembly. Remove the 2 screws from the light in the middle. Pull the assembly out. You can easily remove and install the map lights. Don’t forget to put the ground wire back when reinstalling.
@neto24k962 жыл бұрын
Got my 91 k1500 about 3 months ago and I’ve done some mods just stumbled upon your channel and love the content with the OBS appreciate the content
@GhettoWagon2 жыл бұрын
Nice. My Cam or lifter is shot #3 intake I need to do this same job on my C1500 nice to see it clears the front.