Жыл бұрын
4 жыл бұрын
4 жыл бұрын
5 жыл бұрын
5 жыл бұрын
11 жыл бұрын
Пікірлер
4 ай бұрын
Thank You for this video, it was extremely helpful finding those hidden bolts. I especially appreciate you calling out the sizes of each bolt. I have a 2011 Kia Sorento EX, and this is the same engine. There are painfully few videos on this topic, but yours was perfect for the job!
@tomkruze2749 10 ай бұрын
Absolutely ridiculous!!! WTF KIA!
@tacs3 Жыл бұрын
is it hard or more like silicone? the clear one looked like silicone, but i ordered the black one and looking at this video it looks hard which is not what i want
@dinscool85 Жыл бұрын
Is this something a person who works on simple stuff (like brakes and fluid changes) can take up.
@WWOOTEN Жыл бұрын
Yes
@dinscool85 Жыл бұрын
@@WWOOTEN thanks. What gaskets do you suggest replacing while performing this job..
@Pl_mzk Жыл бұрын
Hey man, did you end up pulling the six cylinder coil and plug and reinstalling? If so, would you mind sharing how you did that? It’s probably the only cylinder on this engine that people need some help with
@kyleschumacher83 Жыл бұрын
Mine are off the side of the block
@QuadroNVS Жыл бұрын
Welp, this shows how much of a pain in the ass this job is. Since this is my only vehicle, I will take it to my independent shop when the time comes.
@immajackassPodcast Жыл бұрын
What size socket
@jasefleetwood 9 ай бұрын
5/8 or 16mm
@MrG00odLooks 2 жыл бұрын
Dude very detailed video as far as educating every one watching, the only thing missing is the light to light up your recording wr couldn't see everything you were showing us. Thank you tho
@calebthomas5411 2 жыл бұрын
is this case still on the apple website ? I can't find them! I love otter box always have case by them on my phones!
@WWOOTEN 2 жыл бұрын
Amazon probably
@calebthomas5411 2 жыл бұрын
@@WWOOTEN yeah I found it on the site just don’t have it for the series 8 yet or 7
@calebthomas5411 2 жыл бұрын
@@WWOOTEN on the Apple site
@falcondragonslayer 2 жыл бұрын
iWatch isn’t an apple device. Apple Watch is the official name of Apple’s smartwatch
@justinkight8594 2 жыл бұрын
I'm doing a purge valve solenoid where is it nobody has a good video
@JomikJomikJomik 2 жыл бұрын
did you do timing chain?
@djijamiee7687 2 жыл бұрын
What do you think to the all day bumper case?
@supermanhun 2 жыл бұрын
Thanks bro
@rmthunder 2 жыл бұрын
Straight and to the point in 2 minutes! Thanks, I thought they were buried in a hard to get place, like the starter.
@theminecartofdenissmincart4246 2 жыл бұрын
Thank you so much!! It wasn’t easy, you help is great full!!
@محمدالمشري-ط6ظ 2 жыл бұрын
how to check and clean v v t solenoid
@HesperianHorsePower 2 жыл бұрын
What’s an iWatch? Is it a new brand? Never heard of it. 😉 Good review man!
@rprcharron 2 жыл бұрын
Man, anybody got any tips for the ridiculous 14mm bolt behind to the left? I absolutely cannot get that thing off.
@FLSharkdiver 2 жыл бұрын
jUST PICKED one up for my new Apple SE watch!! Many thanks for your review mate..
@backpackingtony1779 2 жыл бұрын
I got an Apple Watch series 3 for Christmas and ordered an Otterbox after seeing your video. Great work!
@trackerrrr 3 жыл бұрын
The PCV valve is easy to access and change out with the tank and throttle body out of the way at this time.
@trackerrrr 3 жыл бұрын
Replace the gaskets between the surge tank and the lower manifold when you have them apart. Cheap insurance against leaks.
@stebensbobby 3 жыл бұрын
What kind of screen protecter can u use with that case
@frankiechong3819 3 жыл бұрын
A really thin and protective one that I use and works seamlessly with most cases is the easy flex from Ringke. I have it on my Apple Watch and Otterbox case.
@yungnoba1654 3 жыл бұрын
it should be illegal to sit in a car like this bruh
@tonyallen3138 3 жыл бұрын
This has to be one of the best Apple Watch cases geared towards form and functionality. Awesome review.
@RisingMiracles 3 жыл бұрын
Did you get a screen protector with it or is ok without it? I got the edge case and it’s not enough protection.
@WWOOTEN 3 жыл бұрын
For me I don’t need one, I’m pretty careful with my stuff. I did put a screen protector on there for a while but ended up taking it off because I felt I didn’t need it. I like just the case without the screen protector but everyone is different.
@RisingMiracles 3 жыл бұрын
@@WWOOTEN I think I’ll try it without it first! Thanks for the feedback!!
@RisingMiracles 3 жыл бұрын
@@WWOOTEN got mine and your review 💯 accurate I must say!! This is a good pick up!!
@العراقيالعراقي-ب3م6م 3 жыл бұрын
kia Sedona ❌❌
@ciontosdamaschin5608 3 жыл бұрын
you can put on screen glass with this case? i mean, if the glass is to large, the edges create bubbles.
@rocelyngonzagallosa 3 жыл бұрын
I have mine with tempered glass also then this one. Just be careful on putting in the bumper case, so that the tempered glass will not create some bubbles.
@sinner7947 3 жыл бұрын
Just order it through warranty for $8. That’s what I did. 😂
@spacecoastbonsai1421 3 жыл бұрын
They are cracking down on that. I’ve done it for years. Now when they send you a new one you can randomly be selected to send them the old one to prove it’s broken or whatever. If they don’t get a replacement they charge the msrp for the case. The one I get is like $60 in stores. Lol
@potterfanish 3 жыл бұрын
I just got mine in the mail today for my series 4 40mm love it I got the blue color.
@WWOOTEN 3 жыл бұрын
Nice, still use mine everyday
@brentstephens4081 3 жыл бұрын
Got any tricks to get the 12mm bolt to the left rear of the manifold back on? Lol
@trackerrrr 3 жыл бұрын
A heavy dose of patience and little hands.
@markhayleybeadon 10 ай бұрын
Mirror
@brentstephens4081 3 жыл бұрын
Thanks mate. Very helpful. Gunna give it a go thismorning :)
@brentstephens4081 3 жыл бұрын
Have pulled it all apart and changed sparkles and cleaned the throttle, now reassembling. So far its taken me 5 hours with a few short breaks thrown in
@p4pking393 4 ай бұрын
@@brentstephens4081 so howd you go? all good?
@mikeogden5256 3 жыл бұрын
Love it
@lupegalvan2354 3 жыл бұрын
What would be the gap for the spark plugs?
@Ajantschin 3 жыл бұрын
I have the same. Do you use a separate screen protection?
@WWOOTEN 3 жыл бұрын
Yes, I have a separate screen protector that I have been using, but I think I’m going to take it off soon.
@MsStarryEyed 3 жыл бұрын
Which screen protector do you have? Do most work well with otterbox case? Or do cases typically not fit with screen protectors on?
@JosephHardison 3 жыл бұрын
I know this an old video but does dust and water gets in the case causing the Apple Watch to damage or chip the finished?
@WWOOTEN 3 жыл бұрын
For me, not at all. Thanks to this cover my watch still looks brand new. But that’s just me, I’ve had no issues at all.
@JosephHardison 3 жыл бұрын
@@WWOOTEN thanks for responding! I have ordered a case today but sucks it’s taking approximately two weeks to be delivered from Otterbox but from it’s almost a month or so for the black case.
@dannggg 3 жыл бұрын
I like this and the rhinoshield
@walterccrawford5613 3 жыл бұрын
Buy it at Wal-Mart it’s only $20.00. Great protection.
@titzmageex 4 жыл бұрын
Work with screen protectors?
@WWOOTEN 4 жыл бұрын
Yes I wear a screen protector with mine.
@WWOOTEN 4 жыл бұрын
Screen protectors can vary so depending on which one u get you might need to trim it possibly.
@darkmoonwolfworldseclipse 4 жыл бұрын
I paid $32.00 for mines great case for the Apple Watch
@darkmoonwolfworldseclipse 4 жыл бұрын
I wonder can I use this otter box for my Apple Watch SE 44mm
@seanlove64 3 жыл бұрын
Yes indeed
@darkmoonwolfworldseclipse 3 жыл бұрын
@@seanlove64 I got one a few days ago i pickup from Verizon wireless very cool it protect my screen very good too
@andrewschelb5630 4 жыл бұрын
I have this case, but I do not have a screen protector. Should I get one or is this protective enough?
@lukasz_socha 4 жыл бұрын
Good question. I tried to fit with domeglass screen protection but it doesn’t work well. Aby sugestions?
@trackerrrr 4 жыл бұрын
You can take out the three bolts holding the throttle body to the surge tank and then completely move the tank out of the way, much easier too.
@arthurspontiacfieroblog 4 жыл бұрын
Haven't watched it yet - do you go into the gap on the plugs? I know there were a bunch of service bulletins about changing the ceramic length of the plugs due to heat on a bunch of Kia vehicles. See: www.kia-forums.com/threads/sx-plugs-r-d.279210/page-7
@WWOOTEN 4 жыл бұрын
No I didn’t do that. There is a small tool you can get at Advance or Autozone they are like 1$ that can correctly gap the plugs if needed but most of the time the plugs are pregaped correctly. Mine were fine when I bought them but if someone is having an issue or wants to make sure then gaping them with the tool prior to installing them is super fast and easy.
@arthurspontiacfieroblog 4 жыл бұрын
@@WWOOTEN no, I mean they changed the plugs, entirely. Did you read the link in my post?
@trackerrrr 4 жыл бұрын
@@arthurspontiacfieroblog Those plugs are for the 2.0L Theta engines, not the 3.5L Lambda engines in the 2011-14 Sedonas. Most of the plugs you can buy aftermarket are pregapped already.
@arthurspontiacfieroblog 4 жыл бұрын
@@trackerrrr Brilliant! Thanks!
@arthurspontiacfieroblog 4 жыл бұрын
@@trackerrrr also: I know that those specific plugs on that link were for that engine. I was advised to at least check to see if there had been an update for the 3.5L, because that can and does happen. I called my Kia dealer who advised that there have been no updates that he could find.
@docrofo2573 4 жыл бұрын
Thank you for the video. I’ve tried so many types of bumpers that I was hesitant. I have used numerous otterbox cases and trust the brand, but an Apple Watch is a bit of an investment. I ordered one from apple based off of your video though
@mjsimmons7224 4 жыл бұрын
Can you fit a edge to edge screen protector
@wp8423 4 жыл бұрын
Mj simmons it’s frustrating to have a screen protector it’s possible but you have to be precise once you have your screen protector and you put you case the screen protector comes off and you have to fix it over and over again. You might have a better success than i do. Good luck
@chuck176 3 жыл бұрын
@@wp8423 which is the best glass that would be compatible with this
@wp8423 3 жыл бұрын
@@chuck176 nothing really. Just buy those tempered glass cases that covers the sides too it look better and not bulky and that’s what i used now. Just type tempered glass. I think i bought mine from amazon. Good luck.
@lielisa4621 4 жыл бұрын
Dear Wesley, This is Elisa. I am looking for some YT bloggers who have the interests to review our rugged apple watch case that we are going to launch this month. I have browsed your video and I think you might interesetd in our product and became the first users of this product. We also have waterproof case with band set for 44mm apple watch. If you are interested, please email me ( [email protected] ) In return, I will provide the following benefits to you: 1. Free sample. 2. Discounted rate to buy our products. 3. Other benefits that you want to discuss with us. Any detail you want to know, Please connect me, I will reply to you soon. Sincerely, Elisa
@WWOOTEN 4 жыл бұрын
Li Elisa I sent you and response email
@Htown82 4 жыл бұрын
Review are good but case is super ugly to me, I would never put that on my watch