Do you know where from I can install the quick menu for Canon Pixma MG7120?
@nezuko_owo264211 ай бұрын
T amo persona q me ayuda
@suesloan184 Жыл бұрын
How to clear paper jam
@714milky2 жыл бұрын
Mines only printing gray even with new black ink and cleaned setting
@francesflemings2 жыл бұрын
My printer just stopped printing. Could you help me
@francesflemings2 жыл бұрын
Stopped printing
@ruthandcharlesfields30752 жыл бұрын
Loved this printer until it quit functioning. Can't turn the power button off and I have an error icon on the top right. Screen won't light up.
@ruthandcharlesfields30752 жыл бұрын
What is the icon on the right side (on top) that is lit up yellow with what looks like a lightning bolt inside?
@mariameizoso98983 жыл бұрын
How do you align it. Mine is printing curvy lines.
@mariameizoso98983 жыл бұрын
Does it print 8x10 pictures?
@gccgamersseo88083 жыл бұрын
Asus VG248 Gaming monitor in uae, Gaming monitor in uae gccgamers.com/asus-vg248qg-24-inch-16-9-165-hz-adaptive-sync-lcd-full-hd-1ms-gaming-monitor-vg248qg.html
@attarivanosyahputra70423 жыл бұрын
Do u need Processor installed to test a new motherboard?
@amourimahdi72644 жыл бұрын
Hello can i test my motherbord gigabyte b450 aorus elite without processor and graphic card?
@ayetej53153 жыл бұрын
I don't think that you can.
@Crush33334 жыл бұрын
Good for build beginners Although I would call the title (unintentionally)misleading Agree with the "...dont blow the cpu(or other components)..." comments Good vid regardless 👍
@cptluckystar4 жыл бұрын
Can’t you just leave the PSU in the case and and connect the on off switch to the mobo?
@mimim18104 жыл бұрын
The bracelets and ring give me anxiety
@fahmi81324 жыл бұрын
It is possible without thermal paste?
@royxl95064 жыл бұрын
I like the video just add more enthusiasm to ur voice
@marielindsay47205 жыл бұрын
I need to remove the printhead from my MG7120 to clean it really good. Any tips on how to remove it?
@Kyrbi05 жыл бұрын
A useful & informative video, with some nice personal touches. Thanks!
@TheParadisecove5 жыл бұрын
Brother..ignore all of these negative comments produced by negative people...I found this to be informative as well as entertaining...and love the dry sense of humor...keep on chooglin...
@BillySaxKryme5 жыл бұрын
Lol i have 5450
@AlastairLi5 жыл бұрын
Is there any risk, if I do this without CPU cooler on?
@Kazials5 жыл бұрын
Li Alastair yes. The cpu can fry itself pretty quickly without one.
@DokterLepi5 жыл бұрын
nice info bro
@cjpumpernickle62485 жыл бұрын
Its been a while since I built one, this video and explanation was very good. I have seen it done without installing the cooling fan, for example if you are using a AIO cooler it could get a little awkward, but and big but, better shut it down soon as it posts. CPU gets hot real quick. Obviously with cooling fan is the safe way.
@issatr4p6 жыл бұрын
I got 200€ and i already have 70€ so i’ll buy a msi motherboard and the ryzen 5 2400g
@nicholasbalser69016 жыл бұрын
You touching the IHS of the chip made my OCD go nuts.
@noeljohnson8686 жыл бұрын
Hey everyone, whatever you do, don't buy one of these...it's a total f-in piece of crap, I've had nothing but trouble with mine and I bought it new, not even refurbished, or whatever...it devours color ink even if you only ever print b&w, and then won't work without a new color ink cartridge fitted...that's not even starting on the problems after a power outage...you wouldn't believe the nightmare...so go somewhere else and stay well away from this utter garbage...be warned, if you do buy one, you're gonna regret it eventually...
@chrismiller2196 жыл бұрын
concise, clear, expedient, informative ..not full of himself like other less competent uploaders...a breath of fresh air mate upload more please
@hauldr6 жыл бұрын
thats bad no do not do that
@laochek6 жыл бұрын
Thank you for the vid. Really helped me. Keep up the great work👍🏻👍🏻
@animalyze71206 жыл бұрын
You can buy replacement thermal pads for your ram and vrm's through various Mod and parts sites. They will make a difference, and when you have broken apart pads like that after a cleaning you'll get temp rising. Pads are inexpensive.
@DargusMaximus7 жыл бұрын
Tells about the screwdriver trick Doesent use screwdriver trick k....................
@Eclectic_RN7 жыл бұрын
Nice video. Did you intend NOT to use thermal paste between the CPU and cooler? No matter how flat the cpu and cooler is there is always an air gap. Failure to use thermal paste will cause early failure, it's not even expensive even if you use arctic silver. Perhaps it's time to update the video?
@technologu7 жыл бұрын
that's a stock cooler, those have some cheap thermal paste neatly pre applied. 5:37 see those 3 dark stripes on the bottom of the heat sink?
@bestcady28067 жыл бұрын
Adam pc si kasmasin diye masaustunde geri donusumu bırakmış weqdqsdqdqdqdw
@manan61667 жыл бұрын
can i start get bios acess without processer and ram ?
@DargusMaximus7 жыл бұрын
you cant, processor is required to start processing stuff from bios
@attarivanosyahputra70423 жыл бұрын
@@DargusMaximus do u need processor installed for testing a new motherboard?
@patrickmusson45717 жыл бұрын
I bought a power switch that plugs into the pins on the MOBO, just press that and you don't have to use the screwdriver trick if you don't have a power switch on the MOBO itself.
@DansCoveredWagon7 жыл бұрын
"The notch does not line up." This was educational and mildly entertaining:D
@timekiller19857 жыл бұрын
How to test motherboard if you only have powersupply just power supply.
@ZeeProductions20016 жыл бұрын
you need at least a hgraphis card to see if it works or cpu and fan
@JesusOurKing6 жыл бұрын
You need PSU, CPU, speaker (turn on listen for 3 beeps)
@cooleo98535 жыл бұрын
@@JesusOurKing you dont need a speaker now days dude LOL
@Zakeusa5 жыл бұрын
techs use post cards to test if the motherboard is working with ram cpu ...
@arktikfrozty73187 жыл бұрын
I only plugged in psu and cpu fan it nothing else and it turns on the off
@djbpresents95847 жыл бұрын
Is it safe do that trivk
@maidsrage7 жыл бұрын
lol i'm retarded, I thought the motherboard I bought that included a i5 4690k didnt work, I just didnt plug in the psu and I was angry until I watched the video and noticed I forgot to plug in the psu... xD
@cullenadete9237 жыл бұрын
Realize that this is hella old, but thank you so much.
@jeverly7 жыл бұрын
Sooo mobo turns on but no display on monitor. Mobo is shot yes?
@9876543210goodbye7 жыл бұрын
er...thermal paste
@HighTechRetrospectV7 жыл бұрын
I used the cooler that came with the CPU. thermal paste was already applied :-)
@Voitcu7 жыл бұрын
Im on my 3rd one. Hardly used any really. I only bought it for CD printing as I have an HP Im perfectly happy with for over 4 years now I use for everything else. Upon setting up my last replacement (which they said red is no longer available) I find its a refurbished unit. But more than this the print head is not installed and I cant figure out for the life of me how to put this conundrum into place. Thats 3 in a row folks. Im never buying another Canon printer again.
@HighTechRetrospectV7 жыл бұрын
wow man im sorry to hear that. mine is still running great, however i never used it for CD printing. ive printed everything else with it though. i will say the ink runs out very quickly and the limitation on how many sheets of paper i can put in at a time is pretty frustrating. thanks for commenting and watching. Good luck with your printer problem i hope all goes well
@aradus76837 жыл бұрын
So i build my pc yesterday and it works well but later where it was off i go alone for 1 sek on then off and now its dont turn on but i try it now man :)
@donniehanna7 жыл бұрын
A curious question do you really need to install a ram stick in order to test the motherboard, or can I go without it?
@DidYouReadEULA7 жыл бұрын
Great job Joe...thank you!!
@CopecMechArena7 жыл бұрын
This was very helpful even years later, thanks! I suppose people gave you negative ratings due to blowing on the CPU, but other than that i don't understand a downvote here. Again, VERY helpful, i will be testing my motherboard out of the case right now to give it one last chance before I return it...they are out of stock :( I do have 2 questions that maybe someone can answer though... 1.) I thought my motherboard has serious problems last night because every time i turned it on, it flashed a whole sh1tload of error codes very quickly. BUT, when HighTech Retrospect turned on HIS motherboard in this motherboard test video, his ALSO flashed a whole bunch of error codes!!!!! So, am I wrong? Is my board not bad? I am going to test bed this thing and try running stress tests on CPU on the cardboard! 2.) What is a TP cloth??? Tissue paper??? If so, i didnt think that was a good idea... 3.) I did NOT wipe my CPU prior to installing thermal paste. Is that a problem? 4.) I watched a different KZbin video when building my computer. It told me to install power supply, plug power supply into surge protector with the surge protector OFF and the power supply OFF, plug surge protector into wall, and run anti-static strap from screw or stand-off on power supply to keep me constantly grounded. It did NOT say ANYTHING about unplugging from the surge protector or wall before plugging into the motherboard, so I didn't. could this be the source of all my motherboard problems? This was an open box motherboard from a computer store.