I reckon I am old fashioned but out of the six or seven saws I have in my shop, I have only had a kickback twice. Maybe another time outa 60 plus years. I wouldn't have a riving knife or any anti anything. use ya dang brain. I use my saws to make precision wooden molds and the 113 series craftsman saws are still as accurate as they were at the onset. keep stuff clean and calibrated......if this cancer don't get me I reckon some kickback may take another swing

Gloves are worth than the watch

where is the test drive? I wanted to see the performance.

I got the same kit on black Friday I also got spark plug,Z1 coil,and the intake plenum spacer. I have a K&N CAI but I use the dry filters with a mesh k&n screen I'm in Arizona the dust destroyed the first 2 oiled ones in a few months swapped to dry filters the coupler didn’t fit had to use a big worm clamp I zip tied it on and held while I drove to lowes down the street. My idle is the same I did all manual re-learn. The thing I noticed the most is in the 2k-4k has way more power I can really get her moving I also have a 6'lift and a AFE exhaust looking at some afe headers. No codes but thing loves to drink flex fuel and 91 gas 87 it hates.

Great video but why wear gloves for these both cheap watches

My Ben Nevis has been an absolute weapon as a plant mechanic I never take it off. 3 years of punishment it’s still going

I have a bmw r90/6 1976 twin disc do i need a 38mm ATE kit or a 40mm?

Hallo Heiko, vielen Dank für das tolle Video, ich möchte es auch versuchen mir eine so tolle SKX zu bauen. Leider scheint der Link zum Uhrwerk, den Zeigern und vor allem dem tollen Ziffernblatt nicht mehr zu funktionieren. Kannst du mir da bitte helfen? Vielen Dank und beste Grüße aus Hambrug

The brackets and the hardware are fn garbage . Nothing lines up. The shit they send you with some of these kits are complete bs. I'm better off using fn zip ties.

How does it gather rpm data?

Thank you! Very clear and concise instructions and confirmed I can go from a two disk RAID 1 to a three or 4 disk RAID 5.

Having never rebuilt an ATE caliper you have given me the necessary mental tools to now do so. Great instruction video....thank you very much Heiko!

I'd love to do one of these with a PT5000 movement but I just cannot set hands, I've tried a few times and just ended up thrashing the movement.

Very helpful and I liked the rant. Thank you.

But how much does Col. Kurtz's Rolex go for?

Thank you so much for taking the time to show us how to install this. And the other tidbits. When it comes time for me to buy this I will definitely use your affiliate link. Cheers

It's been roughly a year since uploading this video. Could you tell us what your thoughts are now on the HEIMDALLR SKX007 titanium case please. have you found any issues at all? I have purchased the NH36(4H) regulated movement, dial, crystal and everything else but not the case yet. I'm really leaning towards the NamokiMODS [NMK933 SKX007/SPRD Titanium Case Bundle Mk2] as it's Grade 5 Titanium but it is pricey or do I go with the HEIMDALLR titanium case you used here. 🤔

I bought and fitted a spring, but there is no clearance between the spring and the vehicle, and the spring and the car are in contact with the lower part. I hate my luggage in the loading bin, but is it normal to have no spring and clearance?

The stock headlights on my 2008 frontier are horrible. LED headlights are needed. The rear reverse lights are almost useless.

Would been to see how you removed it 🤔

Moin, Heiko. I am working on my 84 R100RS. The left cylinder is ticking quite a bit, so I think I'll try the shims. Also, I have watched several valve adjustment videos and there are some discrepancies/opinions on proper valve clearance. The sticker on my dash states 0.1mm intake and 0.15mm exhaust. That is what I set them to. Some video contributors suggest 0.1mm intake and 0.2mm exhaust, and one member of an Airhead Facebook Group, suggested 0.2mm intake and 0.3mm exhaust, with the explanation that he had 6 airheads and many miles on them and never had a problem. Then I hear that "slappy valves are happy valves"...etc. Pretty confusing. What do you suggest? Thank you!

I'm running a 2018 takoma. I always carry heavy loads in my loading bin, would this be a good installation?

Great video, I have an R100GSPD ad an R100/7, so true, I laugh when I hear those key board heroes respond with text book answers. One told me that I had mis-matched tires on my bike and that wasn't safe (oh no!) LOL. Besides, a little oil leak is good, let's you know you have oil in the bike. Most of the whiners out there don't even have bikes.... :)

Great video...where does the saddle come from?

The box is made in china, not the watch!

What a rare gem of meaningful details mixed with common sense. Great video, Heiko! Thanks to you and other Airhead owners who generously donate their time and knowledge to make videos, I have learned a lot about servicing my own 84 Airhead. Liebe Gruesse aus Kalifornien!

My parents had wall-mounted in their home. They liked it because it allowed easier cleaning of the floor and the outside of the toilet.

😅😅😅valve body install measurement s of the manuel select valve 😅😅😅😅essentially not a topic of u tube i guess

Lol that thing is about to go nuclear. And he is wondering what the hack is going on.

Cool tip!

Many thanks for sharing. I’m attempting the same crack repair. The alternatives of overlaying a new shower pan or full replacement are way more expensive. I believe the root cause is the hole that is left around the drain pipe during the initial construction is commonly not filled, leaving the acrylic show pan unsupported and with time cracks.

The last reissue from Seiko is smaller: 42.6mm diamerer, i think.

Thank you sir. Alot of useful information. You have taken on a different project. Thank you for sharing it was helpful.

I've installed 4 Katdash replacements on Airheads. They make a hell of a lot of difference.

Always using the wrong foam!!!!

This design is only safe for cylinders which are parallel to the spark plug. If the spark plug enters at an angle then only a very small contact point occurs, which can easily damage the piston crown. Better using the nylon style sold only which have a 90 and a 45 degree angle.

Very good as far as you went. Should have included the entire build in one video. Now I have to search for the second part. I suggest including the link to subsequent parts of a build at the beginning of the comments. UPDATE: NO PART 2! Finish what you start!

I don’t see that plug under my 2021.

Thanks man. I rarely watch vids this long, but I'm putting/6 rockers on my /5 soon, so this was a big help and very informative. Per your English, it's fine and better than most of the population of New Jersey lol. Thanks again.

I must have missed a part where you show where the wires connected to.

What size oil filter wrench is that?

Great Video!!!!!! THANK YOU!!!!!!!!!!!!!!!!

First you helped me with RAID and now this :D You explain so clear and calm, icy to follow. TNX.

Thanks, again.😀 I'm completely newbie. I have a Lockerstore 4 Gen 2 AS6704T with 4×12 TB and 4 SSD. Vats the best RAID 5 OR RAID 6, or some else? Do any tips on that? Great info video you made and you just got a new subscriber. Thanks so much, Heiko. 😃

Thanks, I like instructions with a real speaking host. Asustor itself it god but also like an animated music video. 👍

I bought their splitter/riving knife. Absolutely useless! The splitter is made of this soft, not truly flat aluminum or alloy. Crap!

not a aliuminum block it's cast iron

Gracias, fue de mucha ayuda ❤

How many fucking ads are u gonna put bro

I like the look of old one better than the new if you have ask me beside the sound are not much better than old one but the look more vintage for the Chinese chrome one.