I thought that slam fire would slam the round on the pin and fire the round
@TheArmorersShop7 күн бұрын
Can you explain what you are seeing, that is not that.
@bobsponge18778 күн бұрын
Is the vertical spring on the trigger guard, just acting as a spacer? Also, how does the barrel not flop more forward, is there a stop we can't see?
@TheArmorersShop8 күн бұрын
That's not a spring, it's a threaded rod that connects to the blue block (locking block). This is what holds the barrel closed. There is a spring between the trigger and the locking block, this spring keeps the locking block forward and engaged with the recess on the barrel.
@LegallyReckless14 күн бұрын
What if I have a light primer strike
@TheArmorersShop13 күн бұрын
I would do some research for people who have had similar problems. There may be issues directly connected with the C9 that are causing this malfunction.
@vexbane16 күн бұрын
You should make a video on how to build an ar
@Bujasim1519 күн бұрын
I can hear the south african in you lol
@bennylafell7481Ай бұрын
Such a unique and fasinating gun
@bennylafell7481Ай бұрын
TUCO sent me here, lets goooooo this is gonna be sick
@JosephWolf-go1ilАй бұрын
After much torture testing on this platform. It runs, it hits.
@JosephWolf-go1ilАй бұрын
Righteous
@user-ny9yf7hk7lАй бұрын
Thanks for your movie. Greetings from the Netherlands (Europe).
@TheArmorersShopАй бұрын
Bedankt and welcome to the channel.
@akshay.kumar.kАй бұрын
Which specific shotgun this is could you tell me? Thanks.
@TheArmorersShopАй бұрын
It's a Turkish made gun I found on gunbroker.
@akshay.kumar.kАй бұрын
@@TheArmorersShop Thanks mate.
@akshay.kumar.kАй бұрын
@@TheArmorersShop Very nice explanation and video btw.
@hkvp9tactical4182 ай бұрын
FTF caused by extractor would help many people … just saying
@TheArmorersShop2 ай бұрын
Can you explain how the extractor is causing a failure to fire malfunction
@hkvp9tactical4182 ай бұрын
Great content!! I have a real 7/8th size 1911 in .380 acp. This explains what I’m experiencing with this older 1911 mini.
@mick57402 ай бұрын
Cool video
@TheArmorersShop2 ай бұрын
Thank you.
@pawelmorrison3 ай бұрын
Great animation, thank you for the effort
@TheArmorersShop3 ай бұрын
Glad you liked it!
@ronsamborski62303 ай бұрын
Thank you for a very thorough explanatory video. Great illustrations and the voiceover was clear and easy understandable.
@TheArmorersShop3 ай бұрын
Glad it was helpful!
@luke20193 ай бұрын
I got an weak hammer spring on my maverick 88 12 gauge, I had failures to fire, I had fired a few times then it went off last night, looks like the primer was barely dented just enough to go off and I'm having trouble finding a hammer spring for the maverick 88, the maverick is nearly identical to the Mossberg 500 except the Mossberg 500 uses a metal trigger housing, the maverick 88 uses a cheap plastic trigger housing. My question is, is the mossberg 500 hammer spring interchangeable with maverick 88?
@TheArmorersShop3 ай бұрын
Yes, from what I can tell, they are the same.
@fire_tower3 ай бұрын
Really great product quality, hope your channel gets more love.
@TheArmorersShop3 ай бұрын
Much appreciated!
@WellSpokenRedNeck3 ай бұрын
That very Saffer accent
@CarlPapa884 ай бұрын
I haven't needed it yet, but awesome assembly video. Thank you fir your time spent here.
@TheArmorersShop4 ай бұрын
Thank you
@thatwastakenagain4 ай бұрын
now make one for mags?
@guillermomaguire53945 ай бұрын
Special thanks to Martin and his crew at The Armorer's Shop for knocking out this animation for us at OPSol Texas. They made it super easy.
@MrRiorust5 ай бұрын
Excellent video! I wish I had found this before I spent 3 hours (and 6 lesser videos) trying to sort out the reassembly sequence. I slipped while installing the M*Carbo spring kit, and parts went every where. After 2-2.5 hours I put it aside, got some sleep and a fresh perspective, and had it done in 20 minutes or so after work. This video would have saved a lot of time, and some choice words. Saved in a playlist, subscribed. Thanks
@TheArmorersShop5 ай бұрын
You're very welcome! Glad it helped
@sergioarodrigues5 ай бұрын
Why is not safe carry with 6 rounds? The manual says carry with the gun in the safe notch! There’s no literature saying anything about accidental discharge in the old west ages….
@TheArmorersShop5 ай бұрын
If memory serves. The firing pin is attached to the hammer and not separated like it is on modern revolvers. A single action with the hammer forward on a loaded chamber is considered dangerous because if the hammer is struck, detonation can occur. Modern reproductions have a safety notch on the hammer, allowing the sear to drop into a notch that prevents the hammer from making contact with the percussion cap on the aligned chamber.
@lclnbm5 ай бұрын
If only I had this in 2020...
@user-ys8bh4wq2r5 ай бұрын
How does the automatic ejector on break action that throw out the spent cartridge very fast when the barrel's opened?
@jamesjennings23486 ай бұрын
I watched Bob Munden do this when I was a kid. I recently discovered TUCOtheratt, which is how I found this video. I posted a video of me doing one earlier this week. I'm happy to see the renewed interest in this type of shooting on here.
@russellridge86236 ай бұрын
Really outstanding video. Thank you
@the7observer6 ай бұрын
i always have trouble understand what each part did what and where even with animations. In here every step is properly explained and each part carefully highlighted which is perfect
@TheArmorersShop6 ай бұрын
Thank you for the feedback
@sansenoy6 ай бұрын
Is there any metal powder in the bolt carrier?
@sansenoy6 ай бұрын
@@TheArmorersShop I read somewhere about a bolt carrier for the HK UMP filled with tungsten powder, to reduce the inertial momentum of the bolt in full auto, i thought that's why it's so expensive... The APC, I mean
@shooteveryday18416 ай бұрын
Excellent animation. Interesting to see how B&T used the existing trigger and hammer pins to accommodate the full automatic bits
@TheArmorersShop6 ай бұрын
Thank you
@Fender182413 ай бұрын
Spoke to Karl about this when we were in Switzerland. It was to simplify manufacturing. No reason to make it more complicated.
@chillmonkey67827 ай бұрын
Beautiful animation
@TheArmorersShop7 ай бұрын
Thank you
@tedbaxter52347 ай бұрын
Very nice! Thank you!
@codyjenn87857 ай бұрын
That gun is awesome im fixing to have an aero precision AR 9 build that gub will be awesome in 9mm.
@ahmadnizammohamadnoh59938 ай бұрын
simple, quick & easy explanation... loved it
@russdennis70269 ай бұрын
I hear so much talk about how the Maritime spring cups wear out faster, and I'm here to tell you it's not true. I have over 9000 rounds through my G43x and still going strong.
@shanescott31689 ай бұрын
Good video. However, the link to the next video covered the last part of the video.
@TheArmorersShop9 ай бұрын
Oh I got you, try it now.
@michellemichaels325810 ай бұрын
Awesome 👏
@TheArmorersShop10 ай бұрын
Thanks 🤗
@leonidas996911 ай бұрын
Great detailed video did Tony stark do this video
@TheArmorersShop11 ай бұрын
Haha thanks but no, just me.
@thestoic_rn891111 ай бұрын
First time I see an animation on an underrated firearm
@Archer28M Жыл бұрын
Qestion this is posible just with single action revolver ? So if you own duble action revolver you can't do this ?
@TheArmorersShop Жыл бұрын
This is only possible with a single action as the internal mechanism is different on a double action.
@Whiskey5_ Жыл бұрын
Tuco giving love
@xFoundGamer Жыл бұрын
What if you run all fingers on the hammer instead of just the thumb and pinky?
@TheArmorersShop Жыл бұрын
From what Tuco tells me there is not enough space between the fingers to be able to achieve this, There needs to be enough space to let the hammer to rotate forward without the next finger getting the way. Would be cool if it was possible.